Generated by kicad-footprint-generator · KiCad file format 20260206
R5F10BBGLNA#W5
RENESAS · RENESAS · HVQFN-32-EP(5x5)
R5F10BBGLNA#W5 from RENESAS, in a HVQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P120/ANI25/TI07/TO07/TRDIOD0/SO01/INTP4 | bidirectional | Port 12 I/O pin powered from VDD in 32-pin products, with analog input ANI25, timer TI07/TO07, Timer RD TRDIOD0, CSI01 data output SO01 and external interrupt INTP4 alternate functions; after reset it is an analog input port. |
| 2 | P41/TI10/TO10/TRJIO0/SNZOUT2 | bidirectional | Port 4 I/O pin with timer TI10/TO10, Timer RJ TRJIO0 and SNOOZE status output SNZOUT2 alternate functions; after reset it is an input port. |
| 3 | P40/TOOL0 | bidirectional | Port 4 I/O pin that is the flash programmer/debugger data I/O TOOL0; it must be pulled up externally when on-chip debugging is enabled, and its level after reset release selects normal operation (high) or flash programming mode (0 V). |
| 4 | RESET | input | Active-low system reset input; connect directly or via a resistor to VDD when not used. |
| 5 | P137/INTP0 | input | Input-only port 13 pin that also serves as external interrupt request input INTP0 with selectable valid edge. |
| 6 | P122/X2/EXCLK | input | Input port 12 pin that is the main system clock resonator connection X2 or external clock input EXCLK. |
| 7 | P121/X1 | input | Input port 12 pin that is the main system clock resonator connection X1. |
| 8 | REGC | passive | Regulator output stabilization capacitor connection for internal operation; connect to VSS via a 0.47 to 1 µF capacitor. |
| 9 | VSS | power_in | Ground potential pin for all pins in the 32-pin product. |
| 10 | VDD | power_in | Positive power supply pin for all pins in the 32-pin product (supply voltage range 2.7 V to 5.5 V). |
| 11 | P60/(SCK00)/(SCL00) | bidirectional | Port 6 I/O pin that can be N-ch open-drain output and has an input threshold level setting, with CSI00 clock SCK00 and simplified I2C clock SCL00 assignable via PIOR. |
| 12 | P61/(SI00)/(SDA00)/(RXD0) | bidirectional | Port 6 I/O pin that can be N-ch open-drain output, with CSI00 data input SI00, simplified I2C data SDA00 and UART0 receive RXD0 assignable via PIOR. |
| 13 | P62/(SO00)/(TXD0)/SCLA0 | bidirectional | Port 6 I/O pin that can use a TTL input buffer and N-ch open-drain output, with IICA0 clock SCLA0 and CSI00 data output SO00 or UART0 transmit TXD0 assignable via PIOR. |
| 14 | P63/(SSI00)/SDAA0 | bidirectional | Port 6 I/O pin that can use a TTL input buffer and N-ch open-drain output, with IICA0 data I/O SDAA0 and CSI00 slave select input SSI00 assignable via PIOR. |
| 15 | P30/TI01/TO01/TRDIOD1/SSI00/INTP2/SNZOUT0 | bidirectional | Port 3 I/O pin that can use a TTL input buffer and an on-chip pull-up, with timer TI01/TO01, Timer RD TRDIOD1, slave select SSI00, interrupt INTP2 and SNOOZE output SNZOUT0 alternate functions. |
| 16 | P17/TI00/TO00/TRDIOB1/SCK00/SCL00/INTP3 | bidirectional | Port 1 I/O pin that can use a TTL input buffer and N-ch open-drain output, with timer TI00/TO00, Timer RD TRDIOB1, CSI00 clock SCK00, simplified I2C clock SCL00 and interrupt INTP3 alternate functions. |
| 17 | P16/TI02/TO02/TRDIOC1/SI00/SDA00/RXD0/TOOLRXD | bidirectional | Port 1 I/O pin that can use a TTL input buffer and N-ch open-drain output, with timer TI02/TO02, Timer RD TRDIOC1, CSI00 data input SI00, simplified I2C data SDA00, UART0 receive RXD0 and programming UART receive TOOLRXD alternate functions. |
| 18 | P15/TI05/TO05/TRDIOA1/(TRDIOA0)/(TRDCLK0)/SO00/TXD0/TOOLTXD/RTC1HZ | bidirectional | Port 1 I/O pin that can be N-ch open-drain output, with timer TI05/TO05, Timer RD TRDIOA1, CSI00 data output SO00, UART0 transmit TXD0, programming UART transmit TOOLTXD and RTC 1 Hz output RTC1HZ alternate functions. |
| 19 | P14/TI06/TO06/TRDIOC0/SCK01/SCL01/LRXD0 | bidirectional | Port 1 I/O pin that can use a TTL input buffer and N-ch open-drain output, with timer TI06/TO06, Timer RD TRDIOC0, CSI01 clock SCK01, simplified I2C clock SCL01 and LIN receive LRXD0 alternate functions. |
| 20 | P13/TI04/TO04/TRDIOA0/TRDCLK0/SI01/SDA01/LTXD0 | bidirectional | Port 1 I/O pin that can use a TTL input buffer and N-ch open-drain output, with timer TI04/TO04, Timer RD TRDIOA0/TRDCLK0, CSI01 data input SI01, simplified I2C data SDA01 and LIN transmit LTXD0 alternate functions. |
| 21 | P12/TI11/TO11/(TRDIOD0)/INTP5/SO10/TXD1/SNZOUT3 | bidirectional | Port 1 I/O pin that can be N-ch open-drain output, with timer TI11/TO11, interrupt INTP5, CSI10 data output SO10, UART1 transmit TXD1 and SNOOZE output SNZOUT3 alternate functions. |
| 22 | P11/TI12/TO12/(TRDIOB0)/SI10/SDA10/RXD1/CRXD0 | bidirectional | Port 1 I/O pin that can use a TTL input buffer and N-ch open-drain output, with timer TI12/TO12, CSI10 data input SI10, simplified I2C data SDA10, UART1 receive RXD1 and CAN receive CRXD0 alternate functions. |
| 23 | P10/TI13/TO13/TRJO0/SCK10/SCL10/CTXD0 | bidirectional | Port 1 I/O pin that can use a TTL input buffer and N-ch open-drain output, with timer TI13/TO13, Timer RJ output TRJO0, CSI10 clock SCK10, simplified I2C clock SCL10 and CAN transmit CTXD0 alternate functions. |
| 24 | P33/AVREFP/ANI0 | bidirectional | Port 3 I/O pin that can be set to analog input, serving as A/D converter reference voltage (+ side) input AVREFP or analog input ANI0. |
| 25 | P34/AVREFM/ANI1 | bidirectional | Port 3 I/O pin that can be set to analog input, serving as A/D converter reference voltage (- side) input AVREFM or analog input ANI1. |
| 26 | P80/ANI2/(KR0) | bidirectional | Port 8 I/O pin that can be set to A/D converter analog input ANI2, with key interrupt input KR0 assignable via PIOR. |
| 27 | P81/ANI3/(KR1) | bidirectional | Port 8 I/O pin that can be set to A/D converter analog input ANI3, with key interrupt input KR1 assignable via PIOR. |
| 28 | P82/ANI4/(KR2) | bidirectional | Port 8 I/O pin that can be set to A/D converter analog input ANI4, with key interrupt input KR2 assignable via PIOR. |
| 29 | P83/ANI5/(KR3) | bidirectional | Port 8 I/O pin that can be set to A/D converter analog input ANI5, with key interrupt input KR3 assignable via PIOR. |
| 30 | P84/ANI6/(KR4) | bidirectional | Port 8 I/O pin that can be set to A/D converter analog input ANI6, with key interrupt input KR4 assignable via PIOR. |
| 31 | P85/ANI7/(KR5) | bidirectional | Port 8 I/O pin that can be set to A/D converter analog input ANI7, with key interrupt input KR5 assignable via PIOR. |
| 32 | P125/ANI24/TI03/TO03/TRDIOB0/SSI01/INTP1/SNZOUT1 | bidirectional | Port 12 I/O pin that can use a TTL input buffer and an on-chip pull-up, with analog input ANI24, timer TI03/TO03, Timer RD TRDIOB0, slave select SSI01, interrupt INTP1 and SNOOZE output SNZOUT1 alternate functions. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | HVQFN-32-EP(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
CAD (KiCad official)
- Symbol:
R5F10BBGLNA#W5 - Footprint:
Package_DFN_QFN:HVQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm - 3D model: HVQFN-32-EP(5x5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
r5f10bbglna-w5-etched.step/r5f10bbglna-w5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f10bbglna-w5.step/r5f10bbglna-w5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (1879 pp, sha256
737b915299275df9, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).