3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP1825T-3302E
Microchip Tech · Linear Voltage Regulators (LDO) · SOT-223-5
MCP1825T-3302E from Microchip Tech, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHDN | input | Shutdown control input: logic-high enables the LDO output, logic-low disables it and the PWRGD output, and the quiescent current drops to a typical 0.1 µA. |
| 2 | VIN | power_in | Input voltage supply (2.1V to 6.0V operating range); a 1 µF to 10 µF input capacitor is typically sufficient if the source is distant or a battery. |
| 3 | GND | power_in | Ground pin that conducts only the LDO quiescent current (typically 120 µA); connect to a quiet circuit ground, or to the return of the output capacitor in noisy-input applications. |
| 4 | VOUT | power_out | Regulated output voltage of the LDO, requiring a minimum 1.0 µF output capacitance for stability (22 µF maximum recommended). |
| 5 | PWRGD | output | Open-drain power good output that indicates the output is within a typical 92% of nominal regulation, with a typical 2% hysteresis and an internally fixed 110 µs typical delay. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-223-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.1 | 6 | V | Note 1 | 7 | |
| Input Quiescent Current | Iq | 120 | 220 | µA | IL = 0 mA, VOUT = 0.8V to 5.0V | 7 | |
| Input Quiescent Current for SHDN Mode | ISHDN | 0.1 | 3 | µA | SHDN = GND | 7 | |
| Maximum Output Current | IOUT | 500 | mA | VIN = 2.1V to 6.0V VR = 0.8V to 5.0V, Note 1 | 7 | ||
| Line Regulation | ΔVOUT/(VOUT x ΔVIN) | -0.16 | 0.05 | 0.16 | %/V | (Note 1) ≤ VIN ≤ 6V | 7 |
| Load Regulation | ΔVOUT/VOUT | -1 | 0.5 | 1 | % | IOUT = 1 mA to 500 mA, (Note 4) | 7 |
| Output Short Circuit Current | IOUT_SC | 1.2 | A | RLOAD < 0.1Ω, Peak Current | 7 | ||
| Fixed-Output Voltage Regulation (percent of VR) | VOUT | -2.5 | 0.5 | 2.5 | % | Note 2 | 7 |
| Dropout Voltage | VDROPOUT | 210 | 350 | mV | Note 5, IOUT = 500 mA, VIN(MIN) = 2.1V | 8 | |
| PWRGD Input Voltage Operating Range | VPWRGD_VIN | 1 | 6 | V | TA = +25°C | 8 | |
| PWRGD Input Voltage Operating Range | VPWRGD_VIN | 1.2 | 6 | V | TA = -40°C to +125°C | 8 | |
| PWRGD Threshold Voltage (Referenced to VOUT) | VPWRGD_TH | 90 | 92 | 94 | %VOUT | VOUT >= 2.5V Fixed | 8 |
| PWRGD Threshold Hysteresis | VPWRGD_HYS | 1 | 2 | 3 | %VOUT | 8 | |
| PWRGD Output Voltage Low | VPWRGD_L | 0.2 | 0.4 | V | IPWRGD SINK = 1.2 mA, ADJ = 0V | 8 | |
| Shutdown Logic High Input | VSHDN-HIGH | 45 | %VIN | VIN = 2.1V to 6.0V | 8 | ||
| Shutdown Logic Low Input | VSHDN-LOW | 15 | %VIN | VIN = 2.1V to 6.0V | 8 | ||
| SHDN Input Leakage Current | SHDNILK | -0.1 | 0.001 | 0.1 | µA | VIN = 6V, SHDN =VIN, SHDN = GND | 8 |
| ESD protection HBM | 4 | kV | HBM | 7 | |||
| ESD protection MM | 300 | V | MM | 7 | |||
| Storage Temperature Range | TA | -65 | 150 | °C | 7 | ||
| Maximum Junction Temperature | TJ | 150 | °C | Transient | 10 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Steady State | 10 | |
| Thermal Resistance, 5LD SOT-223, junction to ambient | θJA | 62 | °C/W | EIA/JEDEC JESD51-751-7 4 Layer Board | 10 | ||
| Thermal Resistance, 5LD SOT-223, junction to case | θJC | 15 | °C/W | 10 |
CAD (KiCad official)
- Symbol:
MCP1825T-3302E - Footprint:
Package_TO_SOT_SMD:SOT-223-5 - 3D model: SOT-223-5 (KiCad packages3D, STEP)
- 3D model files:
mcp1825t-3302e-etched.step/mcp1825t-3302e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1825t-3302e.step/mcp1825t-3302e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (38 pp, sha256
078c84d2df9d4861, retrieved 2026-11-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).