main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp1825t-3302e: viewers · Ray
mcp1825t-3302e-etched.glb Publish 0.1.0 · Ray
mcp1825t-3302e-etched.step mcp1825t-3302e: factory component page (tier=lcsc) · Ray
mcp1825t-3302e-hero.glb mcp1825t-3302e: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp1825t-3302e-hero.overlay.json Publish 0.1.0 · Ray
mcp1825t-3302e.glb Publish 0.1.0 · Ray
mcp1825t-3302e.kicad_mod Publish 0.1.0 · Ray
mcp1825t-3302e.kicad_sym Publish 0.1.0 · Ray
mcp1825t-3302e.lbr Publish 0.1.0 · Ray
mcp1825t-3302e.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 5 pins · Ray

MCP1825T-3302E

Microchip Tech · Linear Voltage Regulators (LDO) · SOT-223-5

MCP1825T-3302E from Microchip Tech, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SHDN input Shutdown control input: logic-high enables the LDO output, logic-low disables it and the PWRGD output, and the quiescent current drops to a typical 0.1 µA.
2 VIN power_in Input voltage supply (2.1V to 6.0V operating range); a 1 µF to 10 µF input capacitor is typically sufficient if the source is distant or a battery.
3 GND power_in Ground pin that conducts only the LDO quiescent current (typically 120 µA); connect to a quiet circuit ground, or to the return of the output capacitor in noisy-input applications.
4 VOUT power_out Regulated output voltage of the LDO, requiring a minimum 1.0 µF output capacitance for stability (22 µF maximum recommended).
5 PWRGD output Open-drain power good output that indicates the output is within a typical 92% of nominal regulation, with a typical 2% hysteresis and an internally fixed 110 µs typical delay.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-223-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2.1 6 V Note 1 7
Input Quiescent Current Iq 120 220 µA IL = 0 mA, VOUT = 0.8V to 5.0V 7
Input Quiescent Current for SHDN Mode ISHDN 0.1 3 µA SHDN = GND 7
Maximum Output Current IOUT 500 mA VIN = 2.1V to 6.0V VR = 0.8V to 5.0V, Note 1 7
Line Regulation ΔVOUT/(VOUT x ΔVIN) -0.16 0.05 0.16 %/V (Note 1) ≤ VIN ≤ 6V 7
Load Regulation ΔVOUT/VOUT -1 0.5 1 % IOUT = 1 mA to 500 mA, (Note 4) 7
Output Short Circuit Current IOUT_SC 1.2 A RLOAD < 0.1Ω, Peak Current 7
Fixed-Output Voltage Regulation (percent of VR) VOUT -2.5 0.5 2.5 % Note 2 7
Dropout Voltage VDROPOUT 210 350 mV Note 5, IOUT = 500 mA, VIN(MIN) = 2.1V 8
PWRGD Input Voltage Operating Range VPWRGD_VIN 1 6 V TA = +25°C 8
PWRGD Input Voltage Operating Range VPWRGD_VIN 1.2 6 V TA = -40°C to +125°C 8
PWRGD Threshold Voltage (Referenced to VOUT) VPWRGD_TH 90 92 94 %VOUT VOUT >= 2.5V Fixed 8
PWRGD Threshold Hysteresis VPWRGD_HYS 1 2 3 %VOUT 8
PWRGD Output Voltage Low VPWRGD_L 0.2 0.4 V IPWRGD SINK = 1.2 mA, ADJ = 0V 8
Shutdown Logic High Input VSHDN-HIGH 45 %VIN VIN = 2.1V to 6.0V 8
Shutdown Logic Low Input VSHDN-LOW 15 %VIN VIN = 2.1V to 6.0V 8
SHDN Input Leakage Current SHDNILK -0.1 0.001 0.1 µA VIN = 6V, SHDN =VIN, SHDN = GND 8
ESD protection HBM 4 kV HBM 7
ESD protection MM 300 V MM 7
Storage Temperature Range TA -65 150 °C 7
Maximum Junction Temperature TJ 150 °C Transient 10
Operating Junction Temperature Range TJ -40 125 °C Steady State 10
Thermal Resistance, 5LD SOT-223, junction to ambient θJA 62 °C/W EIA/JEDEC JESD51-751-7 4 Layer Board 10
Thermal Resistance, 5LD SOT-223, junction to case θJC 15 °C/W 10

CAD (KiCad official)

  • Symbol: MCP1825T-3302E
  • Footprint: Package_TO_SOT_SMD:SOT-223-5
  • 3D model: SOT-223-5 (KiCad packages3D, STEP)
  • 3D model files: mcp1825t-3302e-etched.step / mcp1825t-3302e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1825t-3302e.step / mcp1825t-3302e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (38 pp, sha256 078c84d2df9d4861, retrieved 2026-11-07, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF