3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA1637DGKR
Texas Instruments · Audio Amplifiers · VSSOP-8
OPA1637DGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Inverting amplifier input; input voltage must be within VVS- - 0.5 V to VVS+ + 0.5 V, differential voltage ±0.5 V maximum with IN+, input current ±10 mA maximum. |
| 2 | VOCM | input | Output common-mode voltage control input; voltage range from VVS- + 1 V to VVS+ - 1 V (at ±2.5 V supply) or VVS- + 2 V to VVS+ - 2 V (at ±18 V supply). |
| 3 | VS+ | power_in | Positive power-supply input; supply voltage 3 V to 36 V single-supply or ±1.5 V to ±18 V dual-supply mode. |
| 4 | OUT+ | output | Noninverting amplifier output; output voltage swing limited to within ±100 mV of supply rails at ±2.5 V supply or ±230 mV at ±18 V supply. |
| 5 | OUT- | output | Inverting amplifier output; output voltage swing limited to within ±100 mV of supply rails at ±2.5 V supply or ±230 mV at ±18 V supply. |
| 6 | VS- | power_in | Negative power-supply input; supply voltage ±1.5 V to ±18 V in dual-supply mode. |
| 7 | PD | input | Power-down control input; logic low (< VVS+ - 2.0 V) enables power-down mode with 10 to 20 µA quiescent current, logic high (≥ VVS+ - 0.5 V) enables normal operation; leave floating if not used. |
| 8 | IN+ | input | Noninverting amplifier input; input voltage must be within VVS- - 0.5 V to VVS+ + 0.5 V, differential voltage ±0.5 V maximum with IN-, input current ±10 mA maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, single supply | VS | 40 | V | 4 | |||
| Supply voltage, dual supply | VS | -20 | 20 | V | 4 | ||
| IN+, IN– differential voltage | -0.5 | 0.5 | V | 4 | |||
| IN+, IN– current | -10 | 10 | mA | 4 | |||
| OUT+, OUT– current | -50 | 50 | mA | 4 | |||
| Operating temperature | TA | -40 | 150 | °C | 4 | ||
| Junction temperature | TJ | -40 | 175 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Electrostatic discharge, human body model | V(ESD) | -1000 | 1000 | V | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001 | 4 | |
| Electrostatic discharge, charged device model | V(ESD) | -500 | 500 | V | Charged device model (CDM), per JEDEC JESD22-C101 | 4 | |
| Supply voltage, single-supply | VS | 3 | 36 | V | 4 | ||
| Supply voltage, dual-supply | VS | 1.5 | 18 | V | 4 | ||
| Specified temperature | TA | -40 | 125 | °C | 4 | ||
| Input-referred offset voltage | VIO | -200 | 20 | 200 | µV | 5 | |
| Input-referred offset voltage over temperature | VIO | -250 | 250 | µV | TA = –40°C to +125°C | 5 | |
| Input offset voltage drift | -1 | 0.1 | 1 | µV/°C | TA = –40°C to +125°C | 5 | |
| Power-supply rejection ratio | PSRR | -0.5 | 0.025 | 0.5 | µV/V | 5 | |
| Power-supply rejection ratio over temperature | PSRR | -1 | 1 | µV/V | TA = –40°C to +125°C | 5 | |
| Input bias current | IB | -2 | 0.2 | 2 | nA | 5 | |
| Input bias current over temperature | IB | -4 | 4 | nA | TA = –40°C to +125°C | 5 | |
| Input bias current drift | -15 | 2 | 15 | pA/°C | TA = –40°C to +125°C | 5 | |
| Input offset current | IOS | -1 | 0.2 | 1 | nA | 5 | |
| Input offset current over temperature | IOS | -3 | 3 | nA | TA = –40°C to +125°C | 5 | |
| Input offset current drift | -10 | 1 | 10 | pA/°C | TA = –40°C to +125°C | 5 | |
| Common-mode rejection ratio, VS = ±18 V | CMRR | 126 | 140 | dB | VVS– + 1 V ≤ VICM ≤ VVS+ – 1 V, VS = ±18 V | 6 | |
| Open-loop voltage gain, VS = ±2.5 V | AOL | 115 | 120 | dB | VS = ±2.5 V, VVS– + 0.2 V < VO < VVS+ – 0.2 V | 6 | |
| Open-loop voltage gain, VS = ±2.5 V, over temperature | AOL | 110 | 120 | dB | VS = ±2.5 V, VVS– + 0.3 V < VO < VVS+ – 0.3 V, TA = –40°C to +125°C | 6 | |
| Open-loop voltage gain, VS = ±15 V | AOL | 115 | 120 | dB | VS = ±15 V, VVS– + 0.6 V < VO < VVS+ – 0.6 V | 6 | |
| Open-loop voltage gain, VS = ±15 V, over temperature | AOL | 110 | 120 | dB | VS = ±15 V, VVS– + 0.6 V < VO < VVS+ – 0.6 V, TA = –40°C to +125°C | 6 | |
| Output voltage difference from supply voltage, VS = ±2.5 V | -100 | 100 | mV | VS = ±2.5 V | 6 | ||
| Output voltage difference from supply voltage, VS = ±2.5 V, over temperature | -100 | 100 | mV | VS = ±2.5 V, TA = –40°C to +125°C | 6 | ||
| Output voltage difference from supply voltage, VS = ±18 V | -230 | 230 | mV | VS = ±18 V | 6 | ||
| Output voltage difference from supply voltage, VS = ±18 V, over temperature | -270 | 270 | mV | VS = ±18 V, TA = –40°C to +125°C | 6 | ||
| Short-circuit current | ISC | -31 | 31 | mA | 6 | ||
| VOCM common-mode offset voltage | -6 | 1 | 6 | mV | VVOCM = VICM, VO = 0 V | 6 | |
| VOCM common-mode offset voltage, over temperature | -10 | 10 | mV | VVOCM = VICM, VO = 0 V, TA = –40°C to +125°C | 6 | ||
| VOCM common-mode offset voltage drift | -60 | 20 | 60 | µV/°C | VVOCM = VICM, VO = 0 V, TA = –40°C to +125°C | 6 | |
| Quiescent operating current | IQ | 0.95 | 1.2 | mA | 6 | ||
| Quiescent operating current, over temperature | IQ | 1.6 | mA | TA = –40°C to +125°C | 6 | ||
| PD bias current | 1 | 2 | µA | V PD = VVS+ – 2 V | 7 | ||
| Powerdown quiescent current | 10 | 20 | µA | 7 | |||
| Thermal resistance, junction-to-ambient (DGK) | RθJA | 181.1 | °C/W | 4 | |||
| Thermal resistance, junction-to-case (top) (DGK) | RθJC(top) | 68.3 | °C/W | 4 | |||
| Thermal resistance, junction-to-board (DGK) | RθJB | 102.8 | °C/W | 4 | |||
| Junction-to-top characterization parameter (DGK) | ψJT | 10.6 | °C/W | 4 | |||
| Junction-to-board characterization parameter (DGK) | ψJB | 101.1 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
OPA1637DGKR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
opa1637dgkr-etched.step/opa1637dgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa1637dgkr.step/opa1637dgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
2805fbc30543a6f6, retrieved 2026-09-24, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).