Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA1637DGKR

Texas Instruments · Audio Amplifiers · VSSOP-8

OPA1637DGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN- input Inverting amplifier input; input voltage must be within VVS- - 0.5 V to VVS+ + 0.5 V, differential voltage ±0.5 V maximum with IN+, input current ±10 mA maximum.
2 VOCM input Output common-mode voltage control input; voltage range from VVS- + 1 V to VVS+ - 1 V (at ±2.5 V supply) or VVS- + 2 V to VVS+ - 2 V (at ±18 V supply).
3 VS+ power_in Positive power-supply input; supply voltage 3 V to 36 V single-supply or ±1.5 V to ±18 V dual-supply mode.
4 OUT+ output Noninverting amplifier output; output voltage swing limited to within ±100 mV of supply rails at ±2.5 V supply or ±230 mV at ±18 V supply.
5 OUT- output Inverting amplifier output; output voltage swing limited to within ±100 mV of supply rails at ±2.5 V supply or ±230 mV at ±18 V supply.
6 VS- power_in Negative power-supply input; supply voltage ±1.5 V to ±18 V in dual-supply mode.
7 PD input Power-down control input; logic low (< VVS+ - 2.0 V) enables power-down mode with 10 to 20 µA quiescent current, logic high (≥ VVS+ - 0.5 V) enables normal operation; leave floating if not used.
8 IN+ input Noninverting amplifier input; input voltage must be within VVS- - 0.5 V to VVS+ + 0.5 V, differential voltage ±0.5 V maximum with IN-, input current ±10 mA maximum.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, single supply VS 40 V 4
Supply voltage, dual supply VS -20 20 V 4
IN+, IN– differential voltage -0.5 0.5 V 4
IN+, IN– current -10 10 mA 4
OUT+, OUT– current -50 50 mA 4
Operating temperature TA -40 150 °C 4
Junction temperature TJ -40 175 °C 4
Storage temperature Tstg -65 150 °C 4
Electrostatic discharge, human body model V(ESD) -1000 1000 V Human body model (HBM), per ANSI/ESDA/JEDEC JS-001 4
Electrostatic discharge, charged device model V(ESD) -500 500 V Charged device model (CDM), per JEDEC JESD22-C101 4
Supply voltage, single-supply VS 3 36 V 4
Supply voltage, dual-supply VS 1.5 18 V 4
Specified temperature TA -40 125 °C 4
Input-referred offset voltage VIO -200 20 200 µV 5
Input-referred offset voltage over temperature VIO -250 250 µV TA = –40°C to +125°C 5
Input offset voltage drift -1 0.1 1 µV/°C TA = –40°C to +125°C 5
Power-supply rejection ratio PSRR -0.5 0.025 0.5 µV/V 5
Power-supply rejection ratio over temperature PSRR -1 1 µV/V TA = –40°C to +125°C 5
Input bias current IB -2 0.2 2 nA 5
Input bias current over temperature IB -4 4 nA TA = –40°C to +125°C 5
Input bias current drift -15 2 15 pA/°C TA = –40°C to +125°C 5
Input offset current IOS -1 0.2 1 nA 5
Input offset current over temperature IOS -3 3 nA TA = –40°C to +125°C 5
Input offset current drift -10 1 10 pA/°C TA = –40°C to +125°C 5
Common-mode rejection ratio, VS = ±18 V CMRR 126 140 dB VVS– + 1 V ≤ VICM ≤ VVS+ – 1 V, VS = ±18 V 6
Open-loop voltage gain, VS = ±2.5 V AOL 115 120 dB VS = ±2.5 V, VVS– + 0.2 V < VO < VVS+ – 0.2 V 6
Open-loop voltage gain, VS = ±2.5 V, over temperature AOL 110 120 dB VS = ±2.5 V, VVS– + 0.3 V < VO < VVS+ – 0.3 V, TA = –40°C to +125°C 6
Open-loop voltage gain, VS = ±15 V AOL 115 120 dB VS = ±15 V, VVS– + 0.6 V < VO < VVS+ – 0.6 V 6
Open-loop voltage gain, VS = ±15 V, over temperature AOL 110 120 dB VS = ±15 V, VVS– + 0.6 V < VO < VVS+ – 0.6 V, TA = –40°C to +125°C 6
Output voltage difference from supply voltage, VS = ±2.5 V -100 100 mV VS = ±2.5 V 6
Output voltage difference from supply voltage, VS = ±2.5 V, over temperature -100 100 mV VS = ±2.5 V, TA = –40°C to +125°C 6
Output voltage difference from supply voltage, VS = ±18 V -230 230 mV VS = ±18 V 6
Output voltage difference from supply voltage, VS = ±18 V, over temperature -270 270 mV VS = ±18 V, TA = –40°C to +125°C 6
Short-circuit current ISC -31 31 mA 6
VOCM common-mode offset voltage -6 1 6 mV VVOCM = VICM, VO = 0 V 6
VOCM common-mode offset voltage, over temperature -10 10 mV VVOCM = VICM, VO = 0 V, TA = –40°C to +125°C 6
VOCM common-mode offset voltage drift -60 20 60 µV/°C VVOCM = VICM, VO = 0 V, TA = –40°C to +125°C 6
Quiescent operating current IQ 0.95 1.2 mA 6
Quiescent operating current, over temperature IQ 1.6 mA TA = –40°C to +125°C 6
PD bias current 1 2 µA V PD = VVS+ – 2 V 7
Powerdown quiescent current 10 20 µA 7
Thermal resistance, junction-to-ambient (DGK) RθJA 181.1 °C/W 4
Thermal resistance, junction-to-case (top) (DGK) RθJC(top) 68.3 °C/W 4
Thermal resistance, junction-to-board (DGK) RθJB 102.8 °C/W 4
Junction-to-top characterization parameter (DGK) ψJT 10.6 °C/W 4
Junction-to-board characterization parameter (DGK) ψJB 101.1 °C/W 4

CAD (KiCad official)

  • Symbol: OPA1637DGKR
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: opa1637dgkr-etched.step / opa1637dgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa1637dgkr.step / opa1637dgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 2805fbc30543a6f6, retrieved 2026-09-24, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF