Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC18F2580-I/SP

Microchip Tech · MICROCHIP · DIP-28-300mil

PIC18F2580-I from Microchip Tech, in a DIP-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP/RE3 input Active-low Master Clear (Reset) input; also the programming voltage (VPP) input, and RE3 digital input when MCLR is disabled.
2 RA0/AN0 bidirectional General purpose digital I/O (TTL) that is also Analog Input 0.
3 RA1/AN1 bidirectional General purpose digital I/O (TTL) that is also Analog Input 1.
4 RA2/AN2/VREF- bidirectional General purpose digital I/O (TTL) that is also Analog Input 2 and the A/D reference voltage (low) input.
5 RA3/AN3/VREF+ bidirectional General purpose digital I/O (TTL) that is also Analog Input 3 and the A/D reference voltage (high) input.
6 RA4/T0CKI bidirectional General purpose digital I/O (TTL) that is also the Timer0 external clock input (Schmitt Trigger).
7 RA5/AN4/SS/HLVDIN bidirectional General purpose digital I/O (TTL) that is also Analog Input 4, SPI slave select input, and High/Low-Voltage Detect input.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKI/RA7 input Oscillator crystal or external clock input; can instead be configured as general purpose I/O RA7 in internal oscillator modes.
10 OSC2/CLKO/RA6 output Oscillator crystal output, or CLKO at 1/4 the OSC1 frequency in RC mode; can instead be general purpose I/O RA6.
11 RC0/T1OSO/T13CKI bidirectional General purpose digital I/O (Schmitt Trigger) that is also Timer1 oscillator output and Timer1/Timer3 external clock input.
12 RC1/T1OSI bidirectional General purpose digital I/O (Schmitt Trigger) that is also Timer1 oscillator input.
13 RC2/CCP1 bidirectional General purpose digital I/O (Schmitt Trigger) that is also CCP1 capture input / compare output / PWM output.
14 RC3/SCK/SCL bidirectional General purpose digital I/O (Schmitt Trigger) that is also the MSSP synchronous serial clock for SPI mode and I2C mode.
15 RC4/SDI/SDA bidirectional General purpose digital I/O (Schmitt Trigger) that is also the MSSP SPI data input and I2C data I/O.
16 RC5/SDO bidirectional General purpose digital I/O (Schmitt Trigger) that is also the MSSP SPI data output.
17 RC6/TX/CK bidirectional General purpose digital I/O (Schmitt Trigger) that is also the EUSART asynchronous transmit and synchronous clock.
18 RC7/RX/DT bidirectional General purpose digital I/O (Schmitt Trigger) that is also the EUSART asynchronous receive and synchronous data.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins.
21 RB0/INT0/AN10 bidirectional General purpose digital I/O (TTL, weak pull-up available) that is also External Interrupt 0 and Analog Input 10.
22 RB1/INT1/AN8 bidirectional General purpose digital I/O (TTL, weak pull-up available) that is also External Interrupt 1 and Analog Input 8.
23 RB2/INT2/CANTX bidirectional General purpose digital I/O (TTL, weak pull-up available) that is also External Interrupt 2 and the CAN bus TX output.
24 RB3/CANRX bidirectional General purpose digital I/O (TTL, weak pull-up available) that is also the CAN bus RX input.
25 RB4/KBI0/AN9 bidirectional General purpose digital I/O (TTL, weak pull-up available) that is also interrupt-on-change KBI0 and Analog Input 9.
26 RB5/KBI1/PGM bidirectional General purpose digital I/O (TTL, weak pull-up available) that is also interrupt-on-change KBI1 and low-voltage ICSP programming enable.
27 RB6/KBI2/PGC bidirectional General purpose digital I/O (TTL, weak pull-up available) that is also interrupt-on-change KBI2 and the ICSP programming / in-circuit debugger clock.
28 RB7/KBI3/PGD bidirectional General purpose digital I/O (TTL, weak pull-up available) that is also interrupt-on-change KBI3 and the ICSP programming / in-circuit debugger data.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package DIP-28-300mil
Category Embedded Processors & Controllers
Pins 28

CAD (KiCad official)

  • Symbol: PIC18F2580-I
  • Footprint: Package_DIP:DIP-28_W7.62mm
  • 3D model: DIP-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic18f2580-i-etched.step / pic18f2580-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f2580-i.step / pic18f2580-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (490 pp, sha256 121662b2a22f3e42, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC18F2580-I/SP. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC18F2580-I/SO