Generated by kicad-footprint-generator · KiCad file format 20260206
PIC18F2580-I/SP
Microchip Tech · MICROCHIP · DIP-28-300mil
PIC18F2580-I from Microchip Tech, in a DIP-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input; also the programming voltage (VPP) input, and RE3 digital input when MCLR is disabled. |
| 2 | RA0/AN0 | bidirectional | General purpose digital I/O (TTL) that is also Analog Input 0. |
| 3 | RA1/AN1 | bidirectional | General purpose digital I/O (TTL) that is also Analog Input 1. |
| 4 | RA2/AN2/VREF- | bidirectional | General purpose digital I/O (TTL) that is also Analog Input 2 and the A/D reference voltage (low) input. |
| 5 | RA3/AN3/VREF+ | bidirectional | General purpose digital I/O (TTL) that is also Analog Input 3 and the A/D reference voltage (high) input. |
| 6 | RA4/T0CKI | bidirectional | General purpose digital I/O (TTL) that is also the Timer0 external clock input (Schmitt Trigger). |
| 7 | RA5/AN4/SS/HLVDIN | bidirectional | General purpose digital I/O (TTL) that is also Analog Input 4, SPI slave select input, and High/Low-Voltage Detect input. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input; can instead be configured as general purpose I/O RA7 in internal oscillator modes. |
| 10 | OSC2/CLKO/RA6 | output | Oscillator crystal output, or CLKO at 1/4 the OSC1 frequency in RC mode; can instead be general purpose I/O RA6. |
| 11 | RC0/T1OSO/T13CKI | bidirectional | General purpose digital I/O (Schmitt Trigger) that is also Timer1 oscillator output and Timer1/Timer3 external clock input. |
| 12 | RC1/T1OSI | bidirectional | General purpose digital I/O (Schmitt Trigger) that is also Timer1 oscillator input. |
| 13 | RC2/CCP1 | bidirectional | General purpose digital I/O (Schmitt Trigger) that is also CCP1 capture input / compare output / PWM output. |
| 14 | RC3/SCK/SCL | bidirectional | General purpose digital I/O (Schmitt Trigger) that is also the MSSP synchronous serial clock for SPI mode and I2C mode. |
| 15 | RC4/SDI/SDA | bidirectional | General purpose digital I/O (Schmitt Trigger) that is also the MSSP SPI data input and I2C data I/O. |
| 16 | RC5/SDO | bidirectional | General purpose digital I/O (Schmitt Trigger) that is also the MSSP SPI data output. |
| 17 | RC6/TX/CK | bidirectional | General purpose digital I/O (Schmitt Trigger) that is also the EUSART asynchronous transmit and synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | General purpose digital I/O (Schmitt Trigger) that is also the EUSART asynchronous receive and synchronous data. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT0/AN10 | bidirectional | General purpose digital I/O (TTL, weak pull-up available) that is also External Interrupt 0 and Analog Input 10. |
| 22 | RB1/INT1/AN8 | bidirectional | General purpose digital I/O (TTL, weak pull-up available) that is also External Interrupt 1 and Analog Input 8. |
| 23 | RB2/INT2/CANTX | bidirectional | General purpose digital I/O (TTL, weak pull-up available) that is also External Interrupt 2 and the CAN bus TX output. |
| 24 | RB3/CANRX | bidirectional | General purpose digital I/O (TTL, weak pull-up available) that is also the CAN bus RX input. |
| 25 | RB4/KBI0/AN9 | bidirectional | General purpose digital I/O (TTL, weak pull-up available) that is also interrupt-on-change KBI0 and Analog Input 9. |
| 26 | RB5/KBI1/PGM | bidirectional | General purpose digital I/O (TTL, weak pull-up available) that is also interrupt-on-change KBI1 and low-voltage ICSP programming enable. |
| 27 | RB6/KBI2/PGC | bidirectional | General purpose digital I/O (TTL, weak pull-up available) that is also interrupt-on-change KBI2 and the ICSP programming / in-circuit debugger clock. |
| 28 | RB7/KBI3/PGD | bidirectional | General purpose digital I/O (TTL, weak pull-up available) that is also interrupt-on-change KBI3 and the ICSP programming / in-circuit debugger data. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | DIP-28-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
CAD (KiCad official)
- Symbol:
PIC18F2580-I - Footprint:
Package_DIP:DIP-28_W7.62mm - 3D model: DIP-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic18f2580-i-etched.step/pic18f2580-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f2580-i.step/pic18f2580-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (490 pp, sha256
121662b2a22f3e42, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC18F2580-I/SP. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC18F2580-I/SO