3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSTC15L104W-35I-SOP8
STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-8
STC15L104W-35I-SOP8 from STC Micro, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P3.4/RST/T0/INT2/MCLKO | bidirectional | Standard quasi-bidirectional I/O P3.4 (factory default); can be set by STC-ISP as the active-high RST reset pin, or used as T0 external count input, INT2 falling-edge-only external interrupt with power-down wake-up, or MCLKO master clock output (MCLK/1, MCLK/2, MCLK/4). |
| 2 | Vcc | power_in | Positive power supply pin; the operating voltage for the L-series part is 2.4 V to 3.6 V per the selection table. |
| 3 | P3.5/T0CLKO/INT3 | bidirectional | Standard quasi-bidirectional I/O P3.5; can be configured as T0CLKO timer-0 programmable clock output (also divides an external T0 clock input), or as INT3 falling-edge-only external interrupt with power-down wake-up. |
| 4 | Gnd | power_in | Power supply negative terminal, connected to ground. |
| 5 | P3.0/INT4/T2CLKO | bidirectional | Standard quasi-bidirectional I/O P3.0; can be configured as INT4 falling-edge-only external interrupt with power-down wake-up, or as T2CLKO timer-2 programmable clock output; the serial port on this series is implemented in software with P3.0/P3.1 and a timer. |
| 6 | P3.1/T2 | bidirectional | Standard quasi-bidirectional I/O P3.1; serves as the external input of timer/counter 2 (T2). |
| 7 | P3.2/INT0 | bidirectional | Standard quasi-bidirectional I/O P3.2; serves as external interrupt INT0, which can be rising-edge, falling-edge or both (falling-edge only when IT0 is set), and supports power-down wake-up. |
| 8 | P3.3/INT1/RSTOUT_LOW | bidirectional | Standard quasi-bidirectional I/O P3.3; serves as external interrupt INT1 (rising, falling or both edges, or falling-edge only when IT1 is set) with power-down wake-up, and as RSTOUT_LOW, which outputs low after power-on and during reset and can be set high or low by software. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | SOIC-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage | VDD | 2.4 | 3.3 | 3.6 | V | 1030 | |
| Operating Current | ICC | 4 | 10 | mA | 3.3V | 1030 | |
| Input Low (P0,P1,P2,P3) | VIL1 | 0.8 | V | 3.3V | 1030 | ||
| Input High (P0,P1,P2,P3) | VIH1 | 2 | V | 3.3V | 1030 | ||
| Input High (RESET) | VIH2 | 2.2 | V | 3.3V | 1030 | ||
| Sourcing Current for output high (P0,P1,P2,P3) (Quasi-output) | IOH1 | 140 | 170 | uA | 3.3V | 1030 | |
| Logic 0 input current (P0,P1,P2,P3) | IIL | 8 | 50 | uA | Vpin=0V | 1030 | |
| Logic 1 to 0 transition current (P0,P1,P2,P3) | ITL | 110 | 600 | uA | Vpin=2.0V | 1030 | |
| Storage temperature | TST | -55 | 125 | ℃ | 1030 | ||
| Operating temperature (I) | TA | -40 | 85 | ℃ | 1030 | ||
| DC power supply (3V) | VDD - VSS | -0.3 | 3.6 | V | 1030 | ||
| Voltage on any pin | -0.3 | V | 1030 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the | 437 |
CAD (KiCad official)
- Symbol:
STC15L104W-35I-SOP8 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
stc15l104w-35i-sop8-etched.step/stc15l104w-35i-sop8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stc15l104w-35i-sop8.step/stc15l104w-35i-sop8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (1097 pp, sha256
8b798668f36be5ce, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).