main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stc15l104w-35i-sop8: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
stc15l104w-35i-sop8-etched.glb Publish 0.1.0 · Ray
stc15l104w-35i-sop8-etched.step stc15l104w-35i-sop8: factory component page (tier=lcsc) · Ray
stc15l104w-35i-sop8-hero.glb stc15l104w-35i-sop8: hero GLB from the etched model (keeps the MPN mark) · Ray
stc15l104w-35i-sop8-hero.overlay.json Publish 0.1.0 · Ray
stc15l104w-35i-sop8.glb Publish 0.1.0 · Ray
stc15l104w-35i-sop8.kicad_mod Publish 0.1.0 · Ray
stc15l104w-35i-sop8.kicad_sym Publish 0.1.0 · Ray
stc15l104w-35i-sop8.lbr Publish 0.1.0 · Ray
stc15l104w-35i-sop8.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

STC15L104W-35I-SOP8

STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-8

STC15L104W-35I-SOP8 from STC Micro, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P3.4/RST/T0/INT2/MCLKO bidirectional Standard quasi-bidirectional I/O P3.4 (factory default); can be set by STC-ISP as the active-high RST reset pin, or used as T0 external count input, INT2 falling-edge-only external interrupt with power-down wake-up, or MCLKO master clock output (MCLK/1, MCLK/2, MCLK/4).
2 Vcc power_in Positive power supply pin; the operating voltage for the L-series part is 2.4 V to 3.6 V per the selection table.
3 P3.5/T0CLKO/INT3 bidirectional Standard quasi-bidirectional I/O P3.5; can be configured as T0CLKO timer-0 programmable clock output (also divides an external T0 clock input), or as INT3 falling-edge-only external interrupt with power-down wake-up.
4 Gnd power_in Power supply negative terminal, connected to ground.
5 P3.0/INT4/T2CLKO bidirectional Standard quasi-bidirectional I/O P3.0; can be configured as INT4 falling-edge-only external interrupt with power-down wake-up, or as T2CLKO timer-2 programmable clock output; the serial port on this series is implemented in software with P3.0/P3.1 and a timer.
6 P3.1/T2 bidirectional Standard quasi-bidirectional I/O P3.1; serves as the external input of timer/counter 2 (T2).
7 P3.2/INT0 bidirectional Standard quasi-bidirectional I/O P3.2; serves as external interrupt INT0, which can be rising-edge, falling-edge or both (falling-edge only when IT0 is set), and supports power-down wake-up.
8 P3.3/INT1/RSTOUT_LOW bidirectional Standard quasi-bidirectional I/O P3.3; serves as external interrupt INT1 (rising, falling or both edges, or falling-edge only when IT1 is set) with power-down wake-up, and as RSTOUT_LOW, which outputs low after power-on and during reset and can be set high or low by software.

Key specifications

Parameter Value
Manufacturer STC Micro
Package SOIC-8
Category Embedded Processors & Controllers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage VDD 2.4 3.3 3.6 V 1030
Operating Current ICC 4 10 mA 3.3V 1030
Input Low (P0,P1,P2,P3) VIL1 0.8 V 3.3V 1030
Input High (P0,P1,P2,P3) VIH1 2 V 3.3V 1030
Input High (RESET) VIH2 2.2 V 3.3V 1030
Sourcing Current for output high (P0,P1,P2,P3) (Quasi-output) IOH1 140 170 uA 3.3V 1030
Logic 0 input current (P0,P1,P2,P3) IIL 8 50 uA Vpin=0V 1030
Logic 1 to 0 transition current (P0,P1,P2,P3) ITL 110 600 uA Vpin=2.0V 1030
Storage temperature TST -55 125 ℃ 1030
Operating temperature (I) TA -40 85 ℃ 1030
DC power supply (3V) VDD - VSS -0.3 3.6 V 1030
Voltage on any pin -0.3 V 1030

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the 437

CAD (KiCad official)

  • Symbol: STC15L104W-35I-SOP8
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: stc15l104w-35i-sop8-etched.step / stc15l104w-35i-sop8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stc15l104w-35i-sop8.step / stc15l104w-35i-sop8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STC Micro datasheet (1097 pp, sha256 8b798668f36be5ce, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF