Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

WS3232ECN

GEC · RS232 ICs · SOIC-16

WS3232ECN from GEC, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive terminal of the boost charge-pump capacitor C1, which is specified as 0.1 µF in the datasheet conditions.
2 V+ power_out Charge-pump output that generates approximately +5.4 V for the RS-232 drivers.
3 C1- passive Negative terminal of the boost charge-pump capacitor C1, which is specified as 0.1 µF in the datasheet conditions.
4 C2+ passive Positive terminal of the inverting charge-pump capacitor C2, which is specified as 0.1 µF in the datasheet conditions.
5 C2- passive Negative terminal of the inverting charge-pump capacitor C2, which is specified as 0.1 µF in the datasheet conditions.
6 V- power_out Charge-pump output that generates approximately -5.4 V for the RS-232 drivers.
7 T2OUT output Second RS-232 driver output, with an absolute maximum range of -15 V to +15 V.
8 R2IN input Second RS-232 receiver input, with an input voltage range of ±20 V and an absolute maximum range of -20 V to +20 V.
9 R2OUT output Second TTL/CMOS receiver output, with an absolute maximum range of -0.3 V to VCC+0.3 V.
10 T2IN input Second TTL/CMOS driver input, with an absolute maximum range of -0.3 V to +7 V and input thresholds of 0.8 V (low) and 2.4 V (high).
11 T1IN input First TTL/CMOS driver input, with an absolute maximum range of -0.3 V to +7 V and input thresholds of 0.8 V (low) and 2.4 V (high).
12 R1OUT output First TTL/CMOS receiver output, with an absolute maximum range of -0.3 V to VCC+0.3 V.
13 R1IN input First RS-232 receiver input, with an input voltage range of ±20 V and an absolute maximum range of -20 V to +20 V.
14 T1OUT output First RS-232 driver output, with an absolute maximum range of -15 V to +15 V.
15 GND power_in Ground reference for the device.
16 VCC power_in Supply voltage pin, specified as +3 V to +5.5 V in the pin table; the recommended operating range is 3 V to 5.25 V and the absolute maximum is 7 V.

Key specifications

Parameter Value
Manufacturer GEC
Package SOIC-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating temperature (Commercial Grade) 工作温度 -40 25 85 ℃ 2
Supply voltage 电源电压 3 5 V VCC = +3.3V 或者 VCC = +5V 2
Charge pump capacitor C1P, C1N, C2P, C2N 电荷泵电容 0.1 0.1 1 uF 2
Operating current 工作电流 0.5 1 mA TTL Inputs = VCC/GND, RS-232 Input = float 2
Driver input threshold voltage Low 驱动器输入阈值电压 Low 0.8 V VCC = +3.3V 或者 VCC = +5V Supply; VIN = VCC and GND, TIN 2
Driver input threshold voltage High 驱动器输入阈值电压 High 2.4 V 2
Driver input leakage current 输入漏电流 -1 0.1 1 uA 2
Receiver output voltage Low 输出电压 Low 0.4 V IOUT = 1.6mA 2
Receiver output leakage current (outputs disabled) 输出漏电流 -10 0.1 10 uA Receiver Outputs Disabled, VOUT = VCC or GND 2
Receiver input voltage swing 输入电压摆幅 -20 20 V TA = 25°C, VCC = 3.3V或者VCC = +5V Supply 2
Receiver input threshold voltage Low 接收器输入阈值电压 Low 0.8 V 2
Receiver input threshold voltage High 接收器输入阈值电压 High 2.4 V 2
Receiver input resistance 输入电阻 3 5 7 KΩ VIN = ±20V, TA = 25°C 2
Driver output voltage swing 输出电压幅值 -5 5 V RL = 3kΩ, All Outputs are loaded 2
Driver output resistance 输出电阻 300 Ω VCC = VP = VN = GND, VOUT = ±2V 2
Driver output short-circuit current 输出短路电流 -60 60 mA VOUT = GND 2
Driver output leakage current (transmitter disabled) 输出漏电流 -5 5 uA Transmitter Disabled, VOUT = ±12V 2
Maximum data rate 最大数据传输速率 250 Kbps RL = 3kΩ, CL = 1000pF, One Transmitter Switching, TA = 25°C 2
Transition-region slew rate 传输限摆率 6 30 V/uS RL = 3~7kΩ, CL = 150pF to 1000pF, One Transmitter Switching, TA = 25°C, Measured from 3V to -3V or -3V to 3V 2
ESD HBM, RS-232 Inputs and Outputs -15 15 KV RS-232 Inputs and Outputs 3
ESD EN61000-4-2 Contact Discharge, RS-232 Inputs and Outputs -8 8 KV RS-232 Inputs and Outputs 3
ESD EN61000-4-2 Air Gap Discharge, RS-232 Inputs and Outputs -15 15 KV RS-232 Inputs and Outputs 3
Maximum operating voltage 最大工作电压 VCC 7 V 6
Positive charge pump voltage 正电荷泵 VP -0.3 7 V 6
Negative charge pump voltage 负电荷泵 VN -7 0.3 V 6
Driver input pins T1IN, T2IN 驱动器输入脚 -0.3 7 V 6
Receiver input pins R1IN, R2IN 接收器输入脚 -20 20 V 6
Driver output pins T1OUT, T2OUT 驱动器输出脚 -15 15 V 6
Receiver output pins R1OUT, R2OUT 接收器输出脚 -0.3 V 6
Storage temperature 存储温度 TSTG -65 150 ℃ 6
Maximum junction temperature 最高结温 TJ 150 ℃ 6
ESD HBM 2000 V rating ESD-HBM 2000 V 6
Recommended operating voltage 推荐工作电压 VDD 3 5.25 V 6
Recommended operating temperature 工作温度 TA -40 85 ℃ 6
Driver input hysteresis 输入阈值电压迟滞 0.5 V 2
Receiver input hysteresis 接收器输入阈值电压迟滞 0.5 V 2
Receiver input delay 接收器输入延时 0.15 uS CL = 150pF 2
Receiver output delay 接收器输出延时 0.15 uS 2
Receiver input-to-output delay difference 接收器输入输出延时之差 50 nS 3

CAD (KiCad official)

  • Symbol: WS3232ECN
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: ws3232ecn-etched.step / ws3232ecn-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ws3232ecn.step / ws3232ecn.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GEC datasheet (10 pp, sha256 f9cb4940c038f66c, retrieved 2026-10-18, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF