3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownWS3232ECN
GEC · RS232 ICs · SOIC-16
WS3232ECN from GEC, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the boost charge-pump capacitor C1, which is specified as 0.1 µF in the datasheet conditions. |
| 2 | V+ | power_out | Charge-pump output that generates approximately +5.4 V for the RS-232 drivers. |
| 3 | C1- | passive | Negative terminal of the boost charge-pump capacitor C1, which is specified as 0.1 µF in the datasheet conditions. |
| 4 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor C2, which is specified as 0.1 µF in the datasheet conditions. |
| 5 | C2- | passive | Negative terminal of the inverting charge-pump capacitor C2, which is specified as 0.1 µF in the datasheet conditions. |
| 6 | V- | power_out | Charge-pump output that generates approximately -5.4 V for the RS-232 drivers. |
| 7 | T2OUT | output | Second RS-232 driver output, with an absolute maximum range of -15 V to +15 V. |
| 8 | R2IN | input | Second RS-232 receiver input, with an input voltage range of ±20 V and an absolute maximum range of -20 V to +20 V. |
| 9 | R2OUT | output | Second TTL/CMOS receiver output, with an absolute maximum range of -0.3 V to VCC+0.3 V. |
| 10 | T2IN | input | Second TTL/CMOS driver input, with an absolute maximum range of -0.3 V to +7 V and input thresholds of 0.8 V (low) and 2.4 V (high). |
| 11 | T1IN | input | First TTL/CMOS driver input, with an absolute maximum range of -0.3 V to +7 V and input thresholds of 0.8 V (low) and 2.4 V (high). |
| 12 | R1OUT | output | First TTL/CMOS receiver output, with an absolute maximum range of -0.3 V to VCC+0.3 V. |
| 13 | R1IN | input | First RS-232 receiver input, with an input voltage range of ±20 V and an absolute maximum range of -20 V to +20 V. |
| 14 | T1OUT | output | First RS-232 driver output, with an absolute maximum range of -15 V to +15 V. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | VCC | power_in | Supply voltage pin, specified as +3 V to +5.5 V in the pin table; the recommended operating range is 3 V to 5.25 V and the absolute maximum is 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GEC |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating temperature (Commercial Grade) 工作温度 | -40 | 25 | 85 | ℃ | 2 | ||
| Supply voltage 电源电压 | 3 | 5 | V | VCC = +3.3V 或者 VCC = +5V | 2 | ||
| Charge pump capacitor C1P, C1N, C2P, C2N 电荷泵电容 | 0.1 | 0.1 | 1 | uF | 2 | ||
| Operating current 工作电流 | 0.5 | 1 | mA | TTL Inputs = VCC/GND, RS-232 Input = float | 2 | ||
| Driver input threshold voltage Low 驱动器输入阈值电压 Low | 0.8 | V | VCC = +3.3V 或者 VCC = +5V Supply; VIN = VCC and GND, TIN | 2 | |||
| Driver input threshold voltage High 驱动器输入阈值电压 High | 2.4 | V | 2 | ||||
| Driver input leakage current 输入漏电流 | -1 | 0.1 | 1 | uA | 2 | ||
| Receiver output voltage Low 输出电压 Low | 0.4 | V | IOUT = 1.6mA | 2 | |||
| Receiver output leakage current (outputs disabled) 输出漏电流 | -10 | 0.1 | 10 | uA | Receiver Outputs Disabled, VOUT = VCC or GND | 2 | |
| Receiver input voltage swing 输入电压摆幅 | -20 | 20 | V | TA = 25°C, VCC = 3.3V或者VCC = +5V Supply | 2 | ||
| Receiver input threshold voltage Low 接收器输入阈值电压 Low | 0.8 | V | 2 | ||||
| Receiver input threshold voltage High 接收器输入阈值电压 High | 2.4 | V | 2 | ||||
| Receiver input resistance 输入电阻 | 3 | 5 | 7 | KΩ | VIN = ±20V, TA = 25°C | 2 | |
| Driver output voltage swing 输出电压幅值 | -5 | 5 | V | RL = 3kΩ, All Outputs are loaded | 2 | ||
| Driver output resistance 输出电阻 | 300 | Ω | VCC = VP = VN = GND, VOUT = ±2V | 2 | |||
| Driver output short-circuit current 输出短路电流 | -60 | 60 | mA | VOUT = GND | 2 | ||
| Driver output leakage current (transmitter disabled) 输出漏电流 | -5 | 5 | uA | Transmitter Disabled, VOUT = ±12V | 2 | ||
| Maximum data rate 最大数据传输速率 | 250 | Kbps | RL = 3kΩ, CL = 1000pF, One Transmitter Switching, TA = 25°C | 2 | |||
| Transition-region slew rate 传输限摆率 | 6 | 30 | V/uS | RL = 3~7kΩ, CL = 150pF to 1000pF, One Transmitter Switching, TA = 25°C, Measured from 3V to -3V or -3V to 3V | 2 | ||
| ESD HBM, RS-232 Inputs and Outputs | -15 | 15 | KV | RS-232 Inputs and Outputs | 3 | ||
| ESD EN61000-4-2 Contact Discharge, RS-232 Inputs and Outputs | -8 | 8 | KV | RS-232 Inputs and Outputs | 3 | ||
| ESD EN61000-4-2 Air Gap Discharge, RS-232 Inputs and Outputs | -15 | 15 | KV | RS-232 Inputs and Outputs | 3 | ||
| Maximum operating voltage 最大工作电压 | VCC | 7 | V | 6 | |||
| Positive charge pump voltage 正电荷泵 | VP | -0.3 | 7 | V | 6 | ||
| Negative charge pump voltage 负电荷泵 | VN | -7 | 0.3 | V | 6 | ||
| Driver input pins T1IN, T2IN 驱动器输入脚 | -0.3 | 7 | V | 6 | |||
| Receiver input pins R1IN, R2IN 接收器输入脚 | -20 | 20 | V | 6 | |||
| Driver output pins T1OUT, T2OUT 驱动器输出脚 | -15 | 15 | V | 6 | |||
| Receiver output pins R1OUT, R2OUT 接收器输出脚 | -0.3 | V | 6 | ||||
| Storage temperature 存储温度 | TSTG | -65 | 150 | ℃ | 6 | ||
| Maximum junction temperature 最高结温 | TJ | 150 | ℃ | 6 | |||
| ESD HBM 2000 V rating | ESD-HBM | 2000 | V | 6 | |||
| Recommended operating voltage 推荐工作电压 | VDD | 3 | 5.25 | V | 6 | ||
| Recommended operating temperature 工作温度 | TA | -40 | 85 | ℃ | 6 | ||
| Driver input hysteresis 输入阈值电压迟滞 | 0.5 | V | 2 | ||||
| Receiver input hysteresis 接收器输入阈值电压迟滞 | 0.5 | V | 2 | ||||
| Receiver input delay 接收器输入延时 | 0.15 | uS | CL = 150pF | 2 | |||
| Receiver output delay 接收器输出延时 | 0.15 | uS | 2 | ||||
| Receiver input-to-output delay difference 接收器输入输出延时之差 | 50 | nS | 3 |
CAD (KiCad official)
- Symbol:
WS3232ECN - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
ws3232ecn-etched.step/ws3232ecn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ws3232ecn.step/ws3232ecn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GEC datasheet (10 pp, sha256
f9cb4940c038f66c, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).