3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC32MZ2048EFH100-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-100(12x12)
PIC32MZ2048EFH100-I from Microchip Tech, in a TQFP-100(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AN23/AERXERR/RG15 | bidirectional | PORTG RG15 I/O (ST input), also ADC analog input AN23 and alternate Ethernet receive error input AERXERR. |
| 2 | EBIA5/AN34/PMA5/RA5 | bidirectional | PORTA RA5 I/O (ST input), also EBI address EBIA5, ADC analog input AN34 and PMP address PMA5. |
| 3 | EBID5/AN17/RPE5/PMD5/RE5 | bidirectional | PORTE RE5 I/O (ST input), also EBI data EBID5, ADC analog input AN17, PPS-remappable RPE5 and PMP data PMD5. |
| 4 | EBID6/AN16/PMD6/RE6 | bidirectional | PORTE RE6 I/O (ST input), also EBI data EBID6, ADC analog input AN16 and PMP data PMD6. |
| 5 | EBID7/AN15/PMD7/RE7 | bidirectional | PORTE RE7 I/O (ST input), also EBI data EBID7, ADC analog input AN15 and PMP data PMD7. |
| 6 | EBIA6/AN22/RPC1/PMA6/RC1 | bidirectional | PORTC RC1 I/O (ST input), also EBI address EBIA6, ADC analog input AN22, PPS-remappable RPC1 and PMP address PMA6. |
| 7 | EBIA12/AN21/RPC2/PMA12/RC2 | bidirectional | PORTC RC2 I/O (ST input), also EBI address EBIA12, ADC analog input AN21, PPS-remappable RPC2 and PMP address PMA12. |
| 8 | EBIWE/AN20/RPC3/PMWR/RC3 | bidirectional | PORTC RC3 I/O (ST input), also EBI write enable EBIWE, ADC analog input AN20, PPS-remappable RPC3 and PMP write strobe PMWR. |
| 9 | EBIOE/AN19/RPC4/PMRD/RC4 | bidirectional | PORTC RC4 I/O (ST input), also EBI output enable EBIOE, ADC analog input AN19, PPS-remappable RPC4 and PMP read strobe PMRD. |
| 10 | AN14/C1IND/ECOL/RPG6/SCK2/RG6 | bidirectional | PORTG RG6 I/O (ST input), also ADC analog input AN14, comparator 1 input C1IND, Ethernet collision ECOL, PPS-remappable RPG6 and SPI2 clock SCK2. |
| 11 | EBIA4/AN13/C1INC/ECRS/RPG7/SDA4/PMA4/RG7 | bidirectional | PORTG RG7 I/O (ST input), also EBI address EBIA4, ADC analog input AN13, comparator 1 input C1INC, Ethernet carrier sense ECRS, PPS-remappable RPG7, I2C4 data SDA4 and PMP address PMA4. |
| 12 | EBIA3/AN12/C2IND/ERXDV/ECRSDV/AERXDV/AECRSDV/RPG8/SCL4/PMA3/RG8 | bidirectional | PORTG RG8 I/O (ST input), also EBI address EBIA3, ADC analog input AN12, comparator 2 input C2IND, Ethernet receive data valid/carrier sense data valid, PPS-remappable RPG8, I2C4 clock SCL4 and PMP address PMA3. |
| 13 | Vss | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 14 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 15 | MCLR | input | Master Clear input; active-low Reset to the device (ST input). |
| 16 | EBIA2/AN11/C2INC/ERXCLK/EREFCLK/AERXCLK/AEREFCLK/RPG9/PMA2/RG9 | bidirectional | PORTG RG9 I/O (ST input), also EBI address EBIA2, ADC analog input AN11, comparator 2 input C2INC, Ethernet receive clock/reference clock, PPS-remappable RPG9 and PMP address PMA2. |
| 17 | TMS/EBIA16/AN24/RA0 | bidirectional | PORTA RA0 I/O (ST input), also JTAG test mode select TMS, EBI address EBIA16 and ADC analog input AN24. |
| 18 | AN25/AERXD0/RPE8/RE8 | bidirectional | PORTE RE8 I/O (ST input), also ADC analog input AN25, alternate Ethernet receive data AERXD0 and PPS-remappable RPE8. |
| 19 | AN26/AERXD1/RPE9/RE9 | bidirectional | PORTE RE9 I/O (ST input), also ADC analog input AN26, alternate Ethernet receive data AERXD1 and PPS-remappable RPE9. |
| 20 | AN45/C1INA/RPB5/RB5 | bidirectional | PORTB RB5 I/O (ST input), also ADC analog input AN45, comparator 1 positive input C1INA and PPS-remappable RPB5. |
| 21 | AN4/C1INB/RB4 | bidirectional | PORTB RB4 I/O (ST input), also ADC analog input AN4 and comparator 1 selectable negative input C1INB. |
| 22 | AN3/C2INA/RPB3/RB3 | bidirectional | PORTB RB3 I/O (ST input), also ADC analog input AN3, comparator 2 positive input C2INA and PPS-remappable RPB3. |
| 23 | AN2/C2INB/RPB2/RB2 | bidirectional | PORTB RB2 I/O (ST input), also ADC analog input AN2, comparator 2 selectable negative input C2INB and PPS-remappable RPB2. |
| 24 | PGEC1/AN1/RPB1/RB1 | input | Programming/debug clock input for channel 1 (ST); no pull-ups or bypass capacitors allowed on the active PGECx pin. Also PORTB RB1 I/O, ADC analog input AN1 and PPS-remappable RPB1. |
| 25 | PGED1/AN0/RPB0/RB0 | bidirectional | Programming/debug data I/O for channel 1 (ST); no pull-ups or bypass capacitors allowed on the active PGEDx pin. Also PORTB RB0, ADC analog input AN0 and PPS-remappable RPB0. |
| 26 | PGEC2/AN46/RPB6/RB6 | input | Programming/debug clock input for channel 2 (ST); no pull-ups or bypass capacitors allowed on the active PGECx pin. Also PORTB RB6 I/O, ADC analog input AN46 and PPS-remappable RPB6. |
| 27 | PGED2/AN47/RPB7/RB7 | bidirectional | Programming/debug data I/O for channel 2 (ST); no pull-ups or bypass capacitors allowed on the active PGEDx pin. Also PORTB RB7, ADC analog input AN47 and PPS-remappable RPB7. |
| 28 | VREF-/CVREF-/AN27/AERXD2/RA9 | power_in | PORTA RA9 I/O (ST input), also ADC low voltage reference input VREF-, comparator voltage reference low input CVREF-, ADC analog input AN27 and alternate Ethernet receive data AERXD2. |
| 29 | VREF+/CVREF+/AN28/AERXD3/RA10 | power_in | PORTA RA10 I/O (ST input), also ADC high voltage reference input VREF+, comparator voltage reference high input CVREF+, ADC analog input AN28 and alternate Ethernet receive data AERXD3. |
| 30 | AVDD | power_in | Positive supply for analog modules; must be connected at all times, regardless of ADC use. |
| 31 | AVSS | power_in | Ground reference for analog modules; must be connected at all times, regardless of ADC use. |
| 32 | EBIA10/AN48/RPB8/PMA10/RB8 | bidirectional | PORTB RB8 I/O (ST input), also EBI address EBIA10, ADC analog input AN48, PPS-remappable RPB8 and PMP address PMA10. |
| 33 | EBIA7/AN49/RPB9/PMA7/RB9 | bidirectional | PORTB RB9 I/O (ST input), also EBI address EBIA7, ADC analog input AN49, PPS-remappable RPB9 and PMP address PMA7. |
| 34 | EBIA13/CVREFOUT/AN5/RPB10/PMA13/RB10 | bidirectional | PORTB RB10 I/O (ST input), also EBI address EBIA13, comparator voltage reference output CVREFOUT, ADC analog input AN5, PPS-remappable RPB10 and PMP address PMA13. |
| 35 | AN6/ERXERR/AETXERR/RB11 | bidirectional | PORTB RB11 I/O (ST input), also ADC analog input AN6, Ethernet receive error ERXERR and alternate Ethernet transmit error AETXERR. |
| 36 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 37 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 38 | TCK/EBIA19/AN29/RA1 | input | JTAG test clock input (ST). Also PORTA RA1 I/O, EBI address EBIA19 and ADC analog input AN29. |
| 39 | TDI/EBIA18/AN30/RPF13/SCK5/RF13 | bidirectional | JTAG test data input (ST). Also PORTF RF13 I/O, EBI address EBIA18, ADC analog input AN30, PPS-remappable RPF13 and SPI5 clock SCK5. |
| 40 | TDO/EBIA17/AN31/RPF12/RF12 | bidirectional | JTAG test data output. Also PORTF RF12 I/O, EBI address EBIA17, ADC analog input AN31 and PPS-remappable RPF12. |
| 41 | EBIA11/AN7/ERXD0/AECRS/PMA11/RB12 | bidirectional | PORTB RB12 I/O (ST input), also EBI address EBIA11, ADC analog input AN7, Ethernet receive data ERXD0, alternate carrier sense AECRS and PMP address PMA11. |
| 42 | AN8/ERXD1/AECOL/RB13 | bidirectional | PORTB RB13 I/O (ST input), also ADC analog input AN8, Ethernet receive data ERXD1 and alternate collision detect AECOL. |
| 43 | EBIA1/AN9/ERXD2/AETXD3/RPB14/SCK3/PMA1/RB14 | bidirectional | PORTB RB14 I/O (ST input), also EBI address EBIA1, ADC analog input AN9, Ethernet receive data ERXD2, alternate transmit data AETXD3, PPS-remappable RPB14, SPI3 clock SCK3 and PMP address PMA1. |
| 44 | EBIA0/AN10/ERXD3/AETXD2/RPB15/OCFB/PMA0/RB15 | bidirectional | PORTB RB15 I/O (ST input), also EBI address EBIA0, ADC analog input AN10, Ethernet receive data ERXD3, alternate transmit data AETXD2, PPS-remappable RPB15, output compare fault B input OCFB and PMP address PMA0. |
| 45 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 46 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 47 | AN32/AETXD0/RPD14/RD14 | bidirectional | PORTD RD14 I/O (ST input), also ADC analog input AN32, alternate Ethernet transmit data AETXD0 and PPS-remappable RPD14. |
| 48 | AN33/AETXD1/RPD15/SCK6/RD15 | bidirectional | PORTD RD15 I/O (ST input), also ADC analog input AN33, alternate Ethernet transmit data AETXD1, PPS-remappable RPD15 and SPI6 clock SCK6. |
| 49 | OSC1/CLKI/RC12 | input | Oscillator crystal input (ST buffer in RC mode, CMOS otherwise) and external clock source input CLKI; also PORTC RC12 I/O. |
| 50 | OSC2/CLKO/RC15 | output | Oscillator crystal output connecting to the crystal or resonator; optionally CLKO in RC and EC modes. Also PORTC RC15 I/O. |
| 51 | VBUS | power_in | USB bus power monitor input (analog). |
| 52 | VUSB3V3 | power_in | USB internal transceiver supply; if the USB module is not used this pin must be connected to VSS, which disables the shared USBID function. |
| 53 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 54 | D- | bidirectional | USB D- differential data line (analog I/O). |
| 55 | D+ | bidirectional | USB D+ differential data line (analog I/O). |
| 56 | RPF3/USBID/RF3 | bidirectional | PORTF RF3 I/O (ST input), also USB OTG ID detect USBID and PPS-remappable RPF3; USBID is unavailable when VUSB3V3 is tied to VSS. |
| 57 | EBIRDY3/RPF2/SDA3/RF2 | bidirectional | PORTF RF2 I/O (ST input), also EBI ready input EBIRDY3, PPS-remappable RPF2 and I2C3 data SDA3. |
| 58 | EBIRDY2/RPF8/SCL3/RF8 | bidirectional | PORTF RF8 I/O (ST input), also EBI ready input EBIRDY2, PPS-remappable RPF8 and I2C3 clock SCL3. |
| 59 | EBICS0/SCL2/RA2 | bidirectional | PORTA RA2 I/O (ST input), also EBI chip select EBICS0 and I2C2 clock SCL2. |
| 60 | EBIRDY1/SDA2/RA3 | bidirectional | PORTA RA3 I/O (ST input), also EBI ready input EBIRDY1 and I2C2 data SDA2. |
| 61 | EBIA14/PMCS1/PMA14/RA4 | bidirectional | PORTA RA4 I/O (ST input), also EBI address EBIA14, PMP chip select 1 PMCS1 and PMP address PMA14. |
| 62 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 63 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 64 | EBIA9/RPF4/SDA5/PMA9/RF4 | bidirectional | PORTF RF4 I/O (ST input), also EBI address EBIA9, PPS-remappable RPF4, I2C5 data SDA5 and PMP address PMA9. |
| 65 | EBIA8/RPF5/SCL5/PMA8/RF5 | bidirectional | PORTF RF5 I/O (ST input), also EBI address EBIA8, PPS-remappable RPF5, I2C5 clock SCL5 and PMP address PMA8. |
| 66 | AETXCLK/RPA14/SCL1/RA14 | bidirectional | PORTA RA14 I/O (ST input), also alternate Ethernet transmit clock AETXCLK, PPS-remappable RPA14 and I2C1 clock SCL1. |
| 67 | AETXEN/RPA15/SDA1/RA15 | bidirectional | PORTA RA15 I/O (ST input), also alternate Ethernet transmit enable AETXEN, PPS-remappable RPA15 and I2C1 data SDA1. |
| 68 | EBIA15/RPD9/PMCS2/PMA15/RD9 | bidirectional | PORTD RD9 I/O (ST input), also EBI address EBIA15, PPS-remappable RPD9, PMP chip select 2 PMCS2 and PMP address PMA15. |
| 69 | RPD10/SCK4/RD10 | bidirectional | PORTD RD10 I/O (ST input), also PPS-remappable RPD10 and SPI4 clock SCK4. |
| 70 | EMDC/RPD11/RD11 | bidirectional | PORTD RD11 I/O (ST input), also Ethernet management clock EMDC (alternate AEMDC) and PPS-remappable RPD11. |
| 71 | EMDIO/AEMDIO/RPD0/RTCC/INT0/RD0 | bidirectional | PORTD RD0 I/O (ST input), also Ethernet management data EMDIO (alternate AEMDIO), PPS-remappable RPD0, RTCC alarm/seconds output RTCC and external interrupt INT0. |
| 72 | SOSCI/RPC13/RC13 | input | 32.768 kHz low-power secondary oscillator crystal input (ST buffer; CMOS otherwise). Also PORTC RC13 I/O and PPS-remappable RPC13. |
| 73 | SOSCO/RPC14/T1CK/RC14 | output | 32.768 kHz low-power secondary oscillator crystal output. Also PORTC RC14 I/O, PPS-remappable RPC14 and Timer1 external clock input T1CK. |
| 74 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 75 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 76 | RPD1/SCK1/RD1 | bidirectional | PORTD RD1 I/O (ST input), also PPS-remappable RPD1 and SPI1 clock SCK1. |
| 77 | EBID14/ETXEN/RPD2/PMD14/RD2 | bidirectional | PORTD RD2 I/O (ST input), also EBI data EBID14, Ethernet transmit enable ETXEN, PPS-remappable RPD2 and PMP data PMD14. |
| 78 | EBID15/ETXCLK/RPD3/PMD15/RD3 | bidirectional | PORTD RD3 I/O (ST input), also EBI data EBID15, Ethernet transmit clock ETXCLK, PPS-remappable RPD3 and PMP data PMD15. |
| 79 | EBID12/ETXD2/RPD12/PMD12/RD12 | bidirectional | PORTD RD12 I/O (ST input), also EBI data EBID12, Ethernet transmit data ETXD2, PPS-remappable RPD12 and PMP data PMD12. |
| 80 | EBID13/ETXD3/PMD13/RD13 | bidirectional | PORTD RD13 I/O (ST input), also EBI data EBID13, Ethernet transmit data ETXD3 and PMP data PMD13. |
| 81 | SQICS0/RPD4/RD4 | bidirectional | PORTD RD4 I/O (ST input), also SQI chip select SQICS0 and PPS-remappable RPD4. |
| 82 | SQICS1/RPD5/RD5 | bidirectional | PORTD RD5 I/O (ST input), also SQI chip select SQICS1 and PPS-remappable RPD5. |
| 83 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 84 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 85 | EBID11/ETXD1/RPF0/PMD11/RF0 | bidirectional | PORTF RF0 I/O (ST input), also EBI data EBID11, Ethernet transmit data ETXD1, PPS-remappable RPF0 and PMP data PMD11. |
| 86 | EBID10/ETXD0/RPF1/PMD10/RF1 | bidirectional | PORTF RF1 I/O (ST input), also EBI data EBID10, Ethernet transmit data ETXD0, PPS-remappable RPF1 and PMP data PMD10. |
| 87 | EBID9/ETXERR/RPG1/PMD9/RG1 | bidirectional | PORTG RG1 I/O (ST input), also EBI data EBID9, Ethernet transmit error ETXERR, PPS-remappable RPG1 and PMP data PMD9. |
| 88 | EBID8/RPG0/PMD8/RG0 | bidirectional | PORTG RG0 I/O (ST input), also EBI data EBID8, PPS-remappable RPG0 and PMP data PMD8. |
| 89 | TRCLK/SQICLK/RA6 | bidirectional | PORTA RA6 I/O (ST input), also trace clock TRCLK and SQI clock SQICLK. |
| 90 | TRD3/SQID3/RA7 | bidirectional | PORTA RA7 I/O (ST input), also trace data TRD3 and SQI data SQID3. |
| 91 | EBID0/PMD0/RE0 | bidirectional | PORTE RE0 I/O (ST input), also EBI data EBID0 and PMP data PMD0. |
| 92 | VSS | power_in | Ground reference for logic, I/O pins and USB; must be connected at all times. |
| 93 | VDD | power_in | Positive supply for peripheral logic and I/O pins; must be connected at all times. |
| 94 | EBID1/PMD1/RE1 | bidirectional | PORTE RE1 I/O (ST input), also EBI data EBID1 and PMP data PMD1. |
| 95 | TRD2/SQID2/RG14 | bidirectional | PORTG RG14 I/O (ST input), also trace data TRD2 and SQI data SQID2. |
| 96 | TRD1/SQID1/RG12 | bidirectional | PORTG RG12 I/O (ST input), also trace data TRD1 and SQI data SQID1. |
| 97 | TRD0/SQID0/RG13 | bidirectional | PORTG RG13 I/O (ST input), also trace data TRD0 and SQI data SQID0. |
| 98 | EBID2/PMD2/RE2 | bidirectional | PORTE RE2 I/O (ST input), also EBI data EBID2 and PMP data PMD2. |
| 99 | EBID3/RPE3/PMD3/RE3 | bidirectional | PORTE RE3 I/O (ST input), also EBI data EBID3, PPS-remappable RPE3 and PMP data PMD3. |
| 100 | EBID4/AN18/PMD4/RE4 | bidirectional | PORTE RE4 I/O (ST input), also EBI data EBID4, ADC analog input AN18 and PMP data PMD4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-100(12x12) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VDD) operating range, industrial grade (-I), up to 252 MHz | 2.1 | 3.6 | V | -40ºC to +85ºC, DC to 252 MHz (front-page Operating Conditions) | 1 | ||
| Operating temperature range, industrial grade (-I) | -40 | 85 | ºC | 2.1V to 3.6V, DC to 252 MHz (front-page Operating Conditions) | 1 | ||
| Maximum operating frequency (speed rating, H suffix) | 252 | MHz | 2.1V to 3.6V, -40ºC to +85ºC; DC to 252 MHz as printed (Table 1 note 3: 252 MHz speed rating) | 1 | |||
| Voltage on 5V tolerant pin when VDD < 2.1V | 3.2 | V | VDD < 2.1V, relative to VSS; 3.6V or higher violates absolute maximum | 51 | |||
| Voltage on 5V tolerant pin when VDD >= 2.1V | 5.5 | V | VDD >= 2.1V, 5V tolerant pins | 51 | |||
| ADC clock period TAD (minimum) | TAD | 20 | ns | ADC TAD (min) = 20 ns (50 MHz max.), Table 28-1 header | 442 | ||
| EBI maximum speed on EBIAx/EBIDx pins | 50 | MHz | High-speed signal pins, Table 2-1 | 46 | |||
| SQI maximum speed on SQICLK/SQICSx/SQIDx pins | 50 | MHz | High-speed signal pins, Table 2-1 | 46 | |||
| HS USB maximum speed on D+/D- pins | 480 | MHz | High-speed signal pins, Table 2-1 | 46 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | CLR or INV register, the base register must be read. 12.4 Peripheral Pin Select (PPS) | 261 |
CAD (KiCad official)
- Symbol:
PIC32MZ2048EFH100-I - Footprint:
Package_QFP:TQFP-100_12x12mm_P0.4mm - 3D model: TQFP-100(12x12) (KiCad packages3D, STEP)
- 3D model files:
pic32mz2048efh100-i-etched.step/pic32mz2048efh100-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mz2048efh100-i.step/pic32mz2048efh100-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (760 pp, sha256
735501a915a04025, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).