Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC32MZ2048EFH100-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-100(12x12)

PIC32MZ2048EFH100-I from Microchip Tech, in a TQFP-100(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AN23/AERXERR/RG15 bidirectional PORTG RG15 I/O (ST input), also ADC analog input AN23 and alternate Ethernet receive error input AERXERR.
2 EBIA5/AN34/PMA5/RA5 bidirectional PORTA RA5 I/O (ST input), also EBI address EBIA5, ADC analog input AN34 and PMP address PMA5.
3 EBID5/AN17/RPE5/PMD5/RE5 bidirectional PORTE RE5 I/O (ST input), also EBI data EBID5, ADC analog input AN17, PPS-remappable RPE5 and PMP data PMD5.
4 EBID6/AN16/PMD6/RE6 bidirectional PORTE RE6 I/O (ST input), also EBI data EBID6, ADC analog input AN16 and PMP data PMD6.
5 EBID7/AN15/PMD7/RE7 bidirectional PORTE RE7 I/O (ST input), also EBI data EBID7, ADC analog input AN15 and PMP data PMD7.
6 EBIA6/AN22/RPC1/PMA6/RC1 bidirectional PORTC RC1 I/O (ST input), also EBI address EBIA6, ADC analog input AN22, PPS-remappable RPC1 and PMP address PMA6.
7 EBIA12/AN21/RPC2/PMA12/RC2 bidirectional PORTC RC2 I/O (ST input), also EBI address EBIA12, ADC analog input AN21, PPS-remappable RPC2 and PMP address PMA12.
8 EBIWE/AN20/RPC3/PMWR/RC3 bidirectional PORTC RC3 I/O (ST input), also EBI write enable EBIWE, ADC analog input AN20, PPS-remappable RPC3 and PMP write strobe PMWR.
9 EBIOE/AN19/RPC4/PMRD/RC4 bidirectional PORTC RC4 I/O (ST input), also EBI output enable EBIOE, ADC analog input AN19, PPS-remappable RPC4 and PMP read strobe PMRD.
10 AN14/C1IND/ECOL/RPG6/SCK2/RG6 bidirectional PORTG RG6 I/O (ST input), also ADC analog input AN14, comparator 1 input C1IND, Ethernet collision ECOL, PPS-remappable RPG6 and SPI2 clock SCK2.
11 EBIA4/AN13/C1INC/ECRS/RPG7/SDA4/PMA4/RG7 bidirectional PORTG RG7 I/O (ST input), also EBI address EBIA4, ADC analog input AN13, comparator 1 input C1INC, Ethernet carrier sense ECRS, PPS-remappable RPG7, I2C4 data SDA4 and PMP address PMA4.
12 EBIA3/AN12/C2IND/ERXDV/ECRSDV/AERXDV/AECRSDV/RPG8/SCL4/PMA3/RG8 bidirectional PORTG RG8 I/O (ST input), also EBI address EBIA3, ADC analog input AN12, comparator 2 input C2IND, Ethernet receive data valid/carrier sense data valid, PPS-remappable RPG8, I2C4 clock SCL4 and PMP address PMA3.
13 Vss power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
14 VDD power_in Positive supply for peripheral logic and I/O pins; must be connected at all times.
15 MCLR input Master Clear input; active-low Reset to the device (ST input).
16 EBIA2/AN11/C2INC/ERXCLK/EREFCLK/AERXCLK/AEREFCLK/RPG9/PMA2/RG9 bidirectional PORTG RG9 I/O (ST input), also EBI address EBIA2, ADC analog input AN11, comparator 2 input C2INC, Ethernet receive clock/reference clock, PPS-remappable RPG9 and PMP address PMA2.
17 TMS/EBIA16/AN24/RA0 bidirectional PORTA RA0 I/O (ST input), also JTAG test mode select TMS, EBI address EBIA16 and ADC analog input AN24.
18 AN25/AERXD0/RPE8/RE8 bidirectional PORTE RE8 I/O (ST input), also ADC analog input AN25, alternate Ethernet receive data AERXD0 and PPS-remappable RPE8.
19 AN26/AERXD1/RPE9/RE9 bidirectional PORTE RE9 I/O (ST input), also ADC analog input AN26, alternate Ethernet receive data AERXD1 and PPS-remappable RPE9.
20 AN45/C1INA/RPB5/RB5 bidirectional PORTB RB5 I/O (ST input), also ADC analog input AN45, comparator 1 positive input C1INA and PPS-remappable RPB5.
21 AN4/C1INB/RB4 bidirectional PORTB RB4 I/O (ST input), also ADC analog input AN4 and comparator 1 selectable negative input C1INB.
22 AN3/C2INA/RPB3/RB3 bidirectional PORTB RB3 I/O (ST input), also ADC analog input AN3, comparator 2 positive input C2INA and PPS-remappable RPB3.
23 AN2/C2INB/RPB2/RB2 bidirectional PORTB RB2 I/O (ST input), also ADC analog input AN2, comparator 2 selectable negative input C2INB and PPS-remappable RPB2.
24 PGEC1/AN1/RPB1/RB1 input Programming/debug clock input for channel 1 (ST); no pull-ups or bypass capacitors allowed on the active PGECx pin. Also PORTB RB1 I/O, ADC analog input AN1 and PPS-remappable RPB1.
25 PGED1/AN0/RPB0/RB0 bidirectional Programming/debug data I/O for channel 1 (ST); no pull-ups or bypass capacitors allowed on the active PGEDx pin. Also PORTB RB0, ADC analog input AN0 and PPS-remappable RPB0.
26 PGEC2/AN46/RPB6/RB6 input Programming/debug clock input for channel 2 (ST); no pull-ups or bypass capacitors allowed on the active PGECx pin. Also PORTB RB6 I/O, ADC analog input AN46 and PPS-remappable RPB6.
27 PGED2/AN47/RPB7/RB7 bidirectional Programming/debug data I/O for channel 2 (ST); no pull-ups or bypass capacitors allowed on the active PGEDx pin. Also PORTB RB7, ADC analog input AN47 and PPS-remappable RPB7.
28 VREF-/CVREF-/AN27/AERXD2/RA9 power_in PORTA RA9 I/O (ST input), also ADC low voltage reference input VREF-, comparator voltage reference low input CVREF-, ADC analog input AN27 and alternate Ethernet receive data AERXD2.
29 VREF+/CVREF+/AN28/AERXD3/RA10 power_in PORTA RA10 I/O (ST input), also ADC high voltage reference input VREF+, comparator voltage reference high input CVREF+, ADC analog input AN28 and alternate Ethernet receive data AERXD3.
30 AVDD power_in Positive supply for analog modules; must be connected at all times, regardless of ADC use.
31 AVSS power_in Ground reference for analog modules; must be connected at all times, regardless of ADC use.
32 EBIA10/AN48/RPB8/PMA10/RB8 bidirectional PORTB RB8 I/O (ST input), also EBI address EBIA10, ADC analog input AN48, PPS-remappable RPB8 and PMP address PMA10.
33 EBIA7/AN49/RPB9/PMA7/RB9 bidirectional PORTB RB9 I/O (ST input), also EBI address EBIA7, ADC analog input AN49, PPS-remappable RPB9 and PMP address PMA7.
34 EBIA13/CVREFOUT/AN5/RPB10/PMA13/RB10 bidirectional PORTB RB10 I/O (ST input), also EBI address EBIA13, comparator voltage reference output CVREFOUT, ADC analog input AN5, PPS-remappable RPB10 and PMP address PMA13.
35 AN6/ERXERR/AETXERR/RB11 bidirectional PORTB RB11 I/O (ST input), also ADC analog input AN6, Ethernet receive error ERXERR and alternate Ethernet transmit error AETXERR.
36 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
37 VDD power_in Positive supply for peripheral logic and I/O pins; must be connected at all times.
38 TCK/EBIA19/AN29/RA1 input JTAG test clock input (ST). Also PORTA RA1 I/O, EBI address EBIA19 and ADC analog input AN29.
39 TDI/EBIA18/AN30/RPF13/SCK5/RF13 bidirectional JTAG test data input (ST). Also PORTF RF13 I/O, EBI address EBIA18, ADC analog input AN30, PPS-remappable RPF13 and SPI5 clock SCK5.
40 TDO/EBIA17/AN31/RPF12/RF12 bidirectional JTAG test data output. Also PORTF RF12 I/O, EBI address EBIA17, ADC analog input AN31 and PPS-remappable RPF12.
41 EBIA11/AN7/ERXD0/AECRS/PMA11/RB12 bidirectional PORTB RB12 I/O (ST input), also EBI address EBIA11, ADC analog input AN7, Ethernet receive data ERXD0, alternate carrier sense AECRS and PMP address PMA11.
42 AN8/ERXD1/AECOL/RB13 bidirectional PORTB RB13 I/O (ST input), also ADC analog input AN8, Ethernet receive data ERXD1 and alternate collision detect AECOL.
43 EBIA1/AN9/ERXD2/AETXD3/RPB14/SCK3/PMA1/RB14 bidirectional PORTB RB14 I/O (ST input), also EBI address EBIA1, ADC analog input AN9, Ethernet receive data ERXD2, alternate transmit data AETXD3, PPS-remappable RPB14, SPI3 clock SCK3 and PMP address PMA1.
44 EBIA0/AN10/ERXD3/AETXD2/RPB15/OCFB/PMA0/RB15 bidirectional PORTB RB15 I/O (ST input), also EBI address EBIA0, ADC analog input AN10, Ethernet receive data ERXD3, alternate transmit data AETXD2, PPS-remappable RPB15, output compare fault B input OCFB and PMP address PMA0.
45 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
46 VDD power_in Positive supply for peripheral logic and I/O pins; must be connected at all times.
47 AN32/AETXD0/RPD14/RD14 bidirectional PORTD RD14 I/O (ST input), also ADC analog input AN32, alternate Ethernet transmit data AETXD0 and PPS-remappable RPD14.
48 AN33/AETXD1/RPD15/SCK6/RD15 bidirectional PORTD RD15 I/O (ST input), also ADC analog input AN33, alternate Ethernet transmit data AETXD1, PPS-remappable RPD15 and SPI6 clock SCK6.
49 OSC1/CLKI/RC12 input Oscillator crystal input (ST buffer in RC mode, CMOS otherwise) and external clock source input CLKI; also PORTC RC12 I/O.
50 OSC2/CLKO/RC15 output Oscillator crystal output connecting to the crystal or resonator; optionally CLKO in RC and EC modes. Also PORTC RC15 I/O.
51 VBUS power_in USB bus power monitor input (analog).
52 VUSB3V3 power_in USB internal transceiver supply; if the USB module is not used this pin must be connected to VSS, which disables the shared USBID function.
53 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
54 D- bidirectional USB D- differential data line (analog I/O).
55 D+ bidirectional USB D+ differential data line (analog I/O).
56 RPF3/USBID/RF3 bidirectional PORTF RF3 I/O (ST input), also USB OTG ID detect USBID and PPS-remappable RPF3; USBID is unavailable when VUSB3V3 is tied to VSS.
57 EBIRDY3/RPF2/SDA3/RF2 bidirectional PORTF RF2 I/O (ST input), also EBI ready input EBIRDY3, PPS-remappable RPF2 and I2C3 data SDA3.
58 EBIRDY2/RPF8/SCL3/RF8 bidirectional PORTF RF8 I/O (ST input), also EBI ready input EBIRDY2, PPS-remappable RPF8 and I2C3 clock SCL3.
59 EBICS0/SCL2/RA2 bidirectional PORTA RA2 I/O (ST input), also EBI chip select EBICS0 and I2C2 clock SCL2.
60 EBIRDY1/SDA2/RA3 bidirectional PORTA RA3 I/O (ST input), also EBI ready input EBIRDY1 and I2C2 data SDA2.
61 EBIA14/PMCS1/PMA14/RA4 bidirectional PORTA RA4 I/O (ST input), also EBI address EBIA14, PMP chip select 1 PMCS1 and PMP address PMA14.
62 VDD power_in Positive supply for peripheral logic and I/O pins; must be connected at all times.
63 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
64 EBIA9/RPF4/SDA5/PMA9/RF4 bidirectional PORTF RF4 I/O (ST input), also EBI address EBIA9, PPS-remappable RPF4, I2C5 data SDA5 and PMP address PMA9.
65 EBIA8/RPF5/SCL5/PMA8/RF5 bidirectional PORTF RF5 I/O (ST input), also EBI address EBIA8, PPS-remappable RPF5, I2C5 clock SCL5 and PMP address PMA8.
66 AETXCLK/RPA14/SCL1/RA14 bidirectional PORTA RA14 I/O (ST input), also alternate Ethernet transmit clock AETXCLK, PPS-remappable RPA14 and I2C1 clock SCL1.
67 AETXEN/RPA15/SDA1/RA15 bidirectional PORTA RA15 I/O (ST input), also alternate Ethernet transmit enable AETXEN, PPS-remappable RPA15 and I2C1 data SDA1.
68 EBIA15/RPD9/PMCS2/PMA15/RD9 bidirectional PORTD RD9 I/O (ST input), also EBI address EBIA15, PPS-remappable RPD9, PMP chip select 2 PMCS2 and PMP address PMA15.
69 RPD10/SCK4/RD10 bidirectional PORTD RD10 I/O (ST input), also PPS-remappable RPD10 and SPI4 clock SCK4.
70 EMDC/RPD11/RD11 bidirectional PORTD RD11 I/O (ST input), also Ethernet management clock EMDC (alternate AEMDC) and PPS-remappable RPD11.
71 EMDIO/AEMDIO/RPD0/RTCC/INT0/RD0 bidirectional PORTD RD0 I/O (ST input), also Ethernet management data EMDIO (alternate AEMDIO), PPS-remappable RPD0, RTCC alarm/seconds output RTCC and external interrupt INT0.
72 SOSCI/RPC13/RC13 input 32.768 kHz low-power secondary oscillator crystal input (ST buffer; CMOS otherwise). Also PORTC RC13 I/O and PPS-remappable RPC13.
73 SOSCO/RPC14/T1CK/RC14 output 32.768 kHz low-power secondary oscillator crystal output. Also PORTC RC14 I/O, PPS-remappable RPC14 and Timer1 external clock input T1CK.
74 VDD power_in Positive supply for peripheral logic and I/O pins; must be connected at all times.
75 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
76 RPD1/SCK1/RD1 bidirectional PORTD RD1 I/O (ST input), also PPS-remappable RPD1 and SPI1 clock SCK1.
77 EBID14/ETXEN/RPD2/PMD14/RD2 bidirectional PORTD RD2 I/O (ST input), also EBI data EBID14, Ethernet transmit enable ETXEN, PPS-remappable RPD2 and PMP data PMD14.
78 EBID15/ETXCLK/RPD3/PMD15/RD3 bidirectional PORTD RD3 I/O (ST input), also EBI data EBID15, Ethernet transmit clock ETXCLK, PPS-remappable RPD3 and PMP data PMD15.
79 EBID12/ETXD2/RPD12/PMD12/RD12 bidirectional PORTD RD12 I/O (ST input), also EBI data EBID12, Ethernet transmit data ETXD2, PPS-remappable RPD12 and PMP data PMD12.
80 EBID13/ETXD3/PMD13/RD13 bidirectional PORTD RD13 I/O (ST input), also EBI data EBID13, Ethernet transmit data ETXD3 and PMP data PMD13.
81 SQICS0/RPD4/RD4 bidirectional PORTD RD4 I/O (ST input), also SQI chip select SQICS0 and PPS-remappable RPD4.
82 SQICS1/RPD5/RD5 bidirectional PORTD RD5 I/O (ST input), also SQI chip select SQICS1 and PPS-remappable RPD5.
83 VDD power_in Positive supply for peripheral logic and I/O pins; must be connected at all times.
84 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
85 EBID11/ETXD1/RPF0/PMD11/RF0 bidirectional PORTF RF0 I/O (ST input), also EBI data EBID11, Ethernet transmit data ETXD1, PPS-remappable RPF0 and PMP data PMD11.
86 EBID10/ETXD0/RPF1/PMD10/RF1 bidirectional PORTF RF1 I/O (ST input), also EBI data EBID10, Ethernet transmit data ETXD0, PPS-remappable RPF1 and PMP data PMD10.
87 EBID9/ETXERR/RPG1/PMD9/RG1 bidirectional PORTG RG1 I/O (ST input), also EBI data EBID9, Ethernet transmit error ETXERR, PPS-remappable RPG1 and PMP data PMD9.
88 EBID8/RPG0/PMD8/RG0 bidirectional PORTG RG0 I/O (ST input), also EBI data EBID8, PPS-remappable RPG0 and PMP data PMD8.
89 TRCLK/SQICLK/RA6 bidirectional PORTA RA6 I/O (ST input), also trace clock TRCLK and SQI clock SQICLK.
90 TRD3/SQID3/RA7 bidirectional PORTA RA7 I/O (ST input), also trace data TRD3 and SQI data SQID3.
91 EBID0/PMD0/RE0 bidirectional PORTE RE0 I/O (ST input), also EBI data EBID0 and PMP data PMD0.
92 VSS power_in Ground reference for logic, I/O pins and USB; must be connected at all times.
93 VDD power_in Positive supply for peripheral logic and I/O pins; must be connected at all times.
94 EBID1/PMD1/RE1 bidirectional PORTE RE1 I/O (ST input), also EBI data EBID1 and PMP data PMD1.
95 TRD2/SQID2/RG14 bidirectional PORTG RG14 I/O (ST input), also trace data TRD2 and SQI data SQID2.
96 TRD1/SQID1/RG12 bidirectional PORTG RG12 I/O (ST input), also trace data TRD1 and SQI data SQID1.
97 TRD0/SQID0/RG13 bidirectional PORTG RG13 I/O (ST input), also trace data TRD0 and SQI data SQID0.
98 EBID2/PMD2/RE2 bidirectional PORTE RE2 I/O (ST input), also EBI data EBID2 and PMP data PMD2.
99 EBID3/RPE3/PMD3/RE3 bidirectional PORTE RE3 I/O (ST input), also EBI data EBID3, PPS-remappable RPE3 and PMP data PMD3.
100 EBID4/AN18/PMD4/RE4 bidirectional PORTE RE4 I/O (ST input), also EBI data EBID4, ADC analog input AN18 and PMP data PMD4.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-100(12x12)
Category Single Chip Microcomputer/Microcontroller
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (VDD) operating range, industrial grade (-I), up to 252 MHz 2.1 3.6 V -40ºC to +85ºC, DC to 252 MHz (front-page Operating Conditions) 1
Operating temperature range, industrial grade (-I) -40 85 ºC 2.1V to 3.6V, DC to 252 MHz (front-page Operating Conditions) 1
Maximum operating frequency (speed rating, H suffix) 252 MHz 2.1V to 3.6V, -40ºC to +85ºC; DC to 252 MHz as printed (Table 1 note 3: 252 MHz speed rating) 1
Voltage on 5V tolerant pin when VDD < 2.1V 3.2 V VDD < 2.1V, relative to VSS; 3.6V or higher violates absolute maximum 51
Voltage on 5V tolerant pin when VDD >= 2.1V 5.5 V VDD >= 2.1V, 5V tolerant pins 51
ADC clock period TAD (minimum) TAD 20 ns ADC TAD (min) = 20 ns (50 MHz max.), Table 28-1 header 442
EBI maximum speed on EBIAx/EBIDx pins 50 MHz High-speed signal pins, Table 2-1 46
SQI maximum speed on SQICLK/SQICSx/SQIDx pins 50 MHz High-speed signal pins, Table 2-1 46
HS USB maximum speed on D+/D- pins 480 MHz High-speed signal pins, Table 2-1 46

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PPS CLR or INV register, the base register must be read. 12.4 Peripheral Pin Select (PPS) 261

CAD (KiCad official)

  • Symbol: PIC32MZ2048EFH100-I
  • Footprint: Package_QFP:TQFP-100_12x12mm_P0.4mm
  • 3D model: TQFP-100(12x12) (KiCad packages3D, STEP)
  • 3D model files: pic32mz2048efh100-i-etched.step / pic32mz2048efh100-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic32mz2048efh100-i.step / pic32mz2048efh100-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (760 pp, sha256 735501a915a04025, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF