3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownACS722KMATR-10AB-T
Allegro MicroSystems, LLC · Current Sensors · SOIC-16
ACS722KMATR-10AB-T from Allegro MicroSystems, LLC, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Terminal for the current being sensed, fused internally, with 0.85 mΩ typical primary conductor resistance at TA = 25°C. |
| 2 | IP+ | passive | Terminal for the current being sensed, fused internally, with 0.85 mΩ typical primary conductor resistance at TA = 25°C. |
| 3 | IP+ | passive | Terminal for the current being sensed, fused internally, with 0.85 mΩ typical primary conductor resistance at TA = 25°C. |
| 4 | IP+ | passive | Terminal for the current being sensed, fused internally, with 0.85 mΩ typical primary conductor resistance at TA = 25°C. |
| 5 | IP- | passive | Terminal for the current being sensed, fused internally; output rises for current flowing from pins 1 through 4 to pins 5 through 8. |
| 6 | IP- | passive | Terminal for the current being sensed, fused internally; output rises for current flowing from pins 1 through 4 to pins 5 through 8. |
| 7 | IP- | passive | Terminal for the current being sensed, fused internally; output rises for current flowing from pins 1 through 4 to pins 5 through 8. |
| 8 | IP- | passive | Terminal for the current being sensed, fused internally; output rises for current flowing from pins 1 through 4 to pins 5 through 8. |
| 9 | NC | unconnected | No internal connection; recommended to be left unconnected to maintain high creepage. |
| 10 | VCC | power_in | Device power supply terminal, operating from a 3 to 3.6 V single supply (3.3 V typical) with a 6 V absolute maximum rating. |
| 11 | NC | unconnected | No internal connection; recommended to connect to GND for the best ESD performance. |
| 12 | VIOUT | output | Analog output signal proportional to the bidirectional sensed current; must drive a resistive load of at least 4.7 kΩ and a capacitive load of at most 10 nF to GND. |
| 13 | BW_SEL | input | Bandwidth select: grounding this pin selects 80 kHz high-bandwidth mode, and tying it to VCC selects 20 kHz low-noise mode. |
| 14 | NC | unconnected | No internal connection; recommended to connect to GND for the best ESD performance. |
| 15 | GND | power_in | Signal ground terminal for the sensor IC. |
| 16 | NC | unconnected | No internal connection; recommended to be left unconnected to maintain high creepage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOIC-16 |
| Category | Magnetic Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 3 | 3.3 | 3.6 | V | 5 | |
| Supply Current | ICC | 9 | 12 | mA | VCC within VCC(min) and VCC(max) | 5 | |
| Output Capacitance Load | CL | 10 | nF | VIOUT to GND | 5 | ||
| Output Resistive Load | RL | 4.7 | kΩ | VIOUT to GND | 5 | ||
| Saturation Voltage (low) | VOL | 0.33 | V | RL = 4.7 kΩ, TA = 25°C | 5 | ||
| Nonlinearity | ELIN | -1 | 1 | % | Through full range of IP | 5 | |
| Current Sensing Range | IPR | -10 | 10 | A | 6 | ||
| Total Output Error | ETOT | -2.5 | 2.5 | % | IP = IPR(max), TA = 25°C to 125°C | 6 | |
| Sensitivity Error | ESENS | -2 | 2 | % | TA = 25°C to 125°C; measured at IP = IPR(max) | 6 | |
| Sensitivity Error | ESENS | -2.3 | 2.3 | % | TA = -40°C to 25°C; measured at IP = IPR(max) | 6 | |
| Offset Voltage | VOE | -15 | 15 | mV | IP = 0 A; TA = 25°C to 125°C | 6 | |
| Offset Voltage | VOE | -20 | 20 | mV | IP = 0 A; TA = -40°C to 25°C | 6 | |
| Sensitivity Error Lifetime Drift | Esens_drift | -1 | 1 | % | 6 | ||
| Total Output Error Lifetime Drift | Etot_drift | -1 | 1 | % | 6 | ||
| Supply Voltage | VCC | 6 | V | 3 | |||
| Reverse Supply Voltage | VRCC | -0.1 | V | 3 | |||
| Output Voltage | VIOUT | 25 | V | 3 | |||
| Reverse Output Voltage | VRIOUT | -0.1 | V | 3 | |||
| Maximum Continuous Current | ICMAX | 60 | A | TA = 25°C | 3 | ||
| Operating Ambient Temperature | TA | -40 | 125 | °C | Range K | 3 | |
| Junction Temperature | TJ(max) | 165 | °C | 3 | |||
| Storage Temperature | Tstg | -65 | 165 | °C | 3 | ||
| Package Thermal Resistance (Junction to Ambient) | RθJA | 23 | ºC/W | Mounted on Allegro 85-0738 evaluation board with 700 mm2 of 4 oz. copper on each side, thermal vias connecting layers | 3 | ||
| Package Thermal Resistance (Junction to Lead) | RθJL | 5 | ºC/W | Mounted on the Allegro ASEK 722 evaluation board | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | primary copper conduction path (from pins 1 through 4, to pins | 1 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ACS722KMATR-10AB-T - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16, generated on the KiCad land (body 7.5 x 10.21 mm, terminals on the pads, 2.65 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
acs722kmatr-10ab-t-etched.step/acs722kmatr-10ab-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acs722kmatr-10ab-t.step/acs722kmatr-10ab-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems, LLC datasheet (18 pp, sha256
d21c1a44eb8f1ded, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).