Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ACS722KMATR-10AB-T

Allegro MicroSystems, LLC · Current Sensors · SOIC-16

ACS722KMATR-10AB-T from Allegro MicroSystems, LLC, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IP+ passive Terminal for the current being sensed, fused internally, with 0.85 mΩ typical primary conductor resistance at TA = 25°C.
2 IP+ passive Terminal for the current being sensed, fused internally, with 0.85 mΩ typical primary conductor resistance at TA = 25°C.
3 IP+ passive Terminal for the current being sensed, fused internally, with 0.85 mΩ typical primary conductor resistance at TA = 25°C.
4 IP+ passive Terminal for the current being sensed, fused internally, with 0.85 mΩ typical primary conductor resistance at TA = 25°C.
5 IP- passive Terminal for the current being sensed, fused internally; output rises for current flowing from pins 1 through 4 to pins 5 through 8.
6 IP- passive Terminal for the current being sensed, fused internally; output rises for current flowing from pins 1 through 4 to pins 5 through 8.
7 IP- passive Terminal for the current being sensed, fused internally; output rises for current flowing from pins 1 through 4 to pins 5 through 8.
8 IP- passive Terminal for the current being sensed, fused internally; output rises for current flowing from pins 1 through 4 to pins 5 through 8.
9 NC unconnected No internal connection; recommended to be left unconnected to maintain high creepage.
10 VCC power_in Device power supply terminal, operating from a 3 to 3.6 V single supply (3.3 V typical) with a 6 V absolute maximum rating.
11 NC unconnected No internal connection; recommended to connect to GND for the best ESD performance.
12 VIOUT output Analog output signal proportional to the bidirectional sensed current; must drive a resistive load of at least 4.7 kΩ and a capacitive load of at most 10 nF to GND.
13 BW_SEL input Bandwidth select: grounding this pin selects 80 kHz high-bandwidth mode, and tying it to VCC selects 20 kHz low-noise mode.
14 NC unconnected No internal connection; recommended to connect to GND for the best ESD performance.
15 GND power_in Signal ground terminal for the sensor IC.
16 NC unconnected No internal connection; recommended to be left unconnected to maintain high creepage.

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems, LLC
Package SOIC-16
Category Magnetic Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 3 3.3 3.6 V 5
Supply Current ICC 9 12 mA VCC within VCC(min) and VCC(max) 5
Output Capacitance Load CL 10 nF VIOUT to GND 5
Output Resistive Load RL 4.7 kΩ VIOUT to GND 5
Saturation Voltage (low) VOL 0.33 V RL = 4.7 kΩ, TA = 25°C 5
Nonlinearity ELIN -1 1 % Through full range of IP 5
Current Sensing Range IPR -10 10 A 6
Total Output Error ETOT -2.5 2.5 % IP = IPR(max), TA = 25°C to 125°C 6
Sensitivity Error ESENS -2 2 % TA = 25°C to 125°C; measured at IP = IPR(max) 6
Sensitivity Error ESENS -2.3 2.3 % TA = -40°C to 25°C; measured at IP = IPR(max) 6
Offset Voltage VOE -15 15 mV IP = 0 A; TA = 25°C to 125°C 6
Offset Voltage VOE -20 20 mV IP = 0 A; TA = -40°C to 25°C 6
Sensitivity Error Lifetime Drift Esens_drift -1 1 % 6
Total Output Error Lifetime Drift Etot_drift -1 1 % 6
Supply Voltage VCC 6 V 3
Reverse Supply Voltage VRCC -0.1 V 3
Output Voltage VIOUT 25 V 3
Reverse Output Voltage VRIOUT -0.1 V 3
Maximum Continuous Current ICMAX 60 A TA = 25°C 3
Operating Ambient Temperature TA -40 125 °C Range K 3
Junction Temperature TJ(max) 165 °C 3
Storage Temperature Tstg -65 165 °C 3
Package Thermal Resistance (Junction to Ambient) RθJA 23 ºC/W Mounted on Allegro 85-0738 evaluation board with 700 mm2 of 4 oz. copper on each side, thermal vias connecting layers 3
Package Thermal Resistance (Junction to Lead) RθJL 5 ºC/W Mounted on the Allegro ASEK 722 evaluation board 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper primary copper conduction path (from pins 1 through 4, to pins 1

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ACS722KMATR-10AB-T
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16, generated on the KiCad land (body 7.5 x 10.21 mm, terminals on the pads, 2.65 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: acs722kmatr-10ab-t-etched.step / acs722kmatr-10ab-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); acs722kmatr-10ab-t.step / acs722kmatr-10ab-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems, LLC datasheet (18 pp, sha256 d21c1a44eb8f1ded, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF