3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHX724-20B-S
ZHHXDZ · Current Sensors · SOP-8
HX724-20B-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Sampling current positive terminal for the measured main current; the datasheet rates the input current at -50 to 50 A (DC/AC RMS). |
| 2 | IP+ | passive | Sampling current positive terminal, paired internally with pin 1; the datasheet rates the input current at -50 to 50 A (DC/AC RMS). |
| 3 | IP- | passive | Sampling current negative terminal for the measured main current; the datasheet rates the input voltage on VIN+/VIN- at -600 to 600 VPK. |
| 4 | IP- | passive | Sampling current negative terminal, paired internally with pin 3; the datasheet rates the input voltage on VIN+/VIN- at -600 to 600 VPK. |
| 5 | GND | power_in | Ground reference for the sensor; the datasheet lists no separate limit for this pin. |
| 6 | VZCR | output | Zero current reference signal output, which provides 0.5 VCC (2.5 V at 5 V supply) when no current flows; the datasheet specifies an output resistance load of at least 1.5 kΩ... |
| 7 | OUT | output | Signal output terminal carrying the linear output voltage (0.2 V to 4.8 V at 5 V supply); the absolute output voltage range is -0.3 V to VCC+0.3 V with source current up to 6 mA and sink current up to 30 mA. |
| 8 | VCC | power_in | Supply voltage input, specified at 4.5 V to 5.5 V with an absolute maximum of 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | SOP-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | 3 | |
| Static current (OUT hanging) | ICC | 20 | 25 | mA | OUT hanging | 3 | |
| Reference output (zero current reference) | VZCR | 2.47 | 2.5 | 2.53 | V | IP=0 | 3 |
| Static output voltage | VOUT(Q) | 2.49 | 2.5 | 2.51 | V | IP=0 | 3 |
| System bandwidth | BW | 250 | kHz | -3dB | 3 | ||
| Total output error (20B series) | ETOT | -3 | 3 | % | 3 | ||
| Sensitivity (20B series) | Sens | 97 | 100 | 103 | mV/A | Full current range | 3 |
| Zero current differential output error (20B series) | VOE | -25 | 25 | mV | 3 | ||
| Supply voltage (absolute maximum) | VCC | 7 | V | 2 | |||
| Output voltage | VOUT | -0.3 | V | Upper limit printed as VCC+0.3 | 2 | ||
| Output source current | IOUT(SOURCE) | 6 | mA | 2 | |||
| Output sink current | IOUT(SINK) | 30 | mA | 2 | |||
| Universal insulation voltage | VISO | 3500 | VRMS | 2 | |||
| Input current peak | IPEAK | 100 | A | 3 seconds | 2 | ||
| Input current continuous | ICON | 40 | A | 2 | |||
| Operating ambient temperature (absolute maximum) | TA | -40 | 125 | °C | 2 | ||
| Maximum junction temperature | TJ | 165 | °C | 2 | |||
| Storage ambient temperature | TS | -55 | 150 | °C | 2 | ||
| Electrostatic protection | ESD(HBM) | 4000 | V | HBM | 2 | ||
| Input voltage | VIN+,VIN- | -600 | 600 | VPK | 2 | ||
| Input current (DC/AC RMS) | IP | -50 | 50 | A | 2 | ||
| Supply voltage (recommended) | VCC | 4.5 | 5.5 | V | 2 | ||
| Ambient temperature (recommended) | TA | -40 | 125 | °C | 2 | ||
| Dielectric strength test voltage | VISO | 3500 | VRMS | Type test 50/60Hz, 1min | 2 | ||
| Dielectric strength test voltage (100% production) | VTEST | 3900 | VRMS | t = 1s (100% production) | 2 | ||
| Electrical clearance | 3.8 | mm | Minimum distance from input to output | 2 | |||
| Maximum isolation voltage (AC bipolar) | VIORM | 600 | VPK | AC voltage (bipolar) | 2 | ||
| Maximum operating isolation voltage (AC sine wave) | VIOWM | 424 | VRMS | AC voltage (sine wave) | 2 | ||
| Maximum transient isolation voltage (type test) | VIOTM | 4949 | VPK | Type test, t = 60s | 2 | ||
| Maximum transient isolation voltage (100% production) | VIOTM | 5515 | VPK | t = 1s (100% production) | 2 | ||
| Maximum surge isolation voltage | VIOSM | 7000 | VPK | Type test, 1.2 µs (rise) / 50 µs (width) | 2 | ||
| Inrush current | ISURGE | 7.5 | kA | Type test coincidence IEC 61000-4-5, 8 µs (rise) / 20 µs (width) | 2 |
CAD (KiCad official)
- Symbol:
HX724-20B-S - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx724-20b-s-etched.step/hx724-20b-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx724-20b-s.step/hx724-20b-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZHHXDZ datasheet (6 pp, sha256
a0ce11e806a3a70c, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).