Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HX724-20B-S

ZHHXDZ · Current Sensors · SOP-8

HX724-20B-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IP+ passive Sampling current positive terminal for the measured main current; the datasheet rates the input current at -50 to 50 A (DC/AC RMS).
2 IP+ passive Sampling current positive terminal, paired internally with pin 1; the datasheet rates the input current at -50 to 50 A (DC/AC RMS).
3 IP- passive Sampling current negative terminal for the measured main current; the datasheet rates the input voltage on VIN+/VIN- at -600 to 600 VPK.
4 IP- passive Sampling current negative terminal, paired internally with pin 3; the datasheet rates the input voltage on VIN+/VIN- at -600 to 600 VPK.
5 GND power_in Ground reference for the sensor; the datasheet lists no separate limit for this pin.
6 VZCR output Zero current reference signal output, which provides 0.5 VCC (2.5 V at 5 V supply) when no current flows; the datasheet specifies an output resistance load of at least 1.5 kΩ...
7 OUT output Signal output terminal carrying the linear output voltage (0.2 V to 4.8 V at 5 V supply); the absolute output voltage range is -0.3 V to VCC+0.3 V with source current up to 6 mA and sink current up to 30 mA.
8 VCC power_in Supply voltage input, specified at 4.5 V to 5.5 V with an absolute maximum of 7 V.

Key specifications

Parameter Value
Manufacturer ZHHXDZ
Package SOP-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 4.5 5 5.5 V 3
Static current (OUT hanging) ICC 20 25 mA OUT hanging 3
Reference output (zero current reference) VZCR 2.47 2.5 2.53 V IP=0 3
Static output voltage VOUT(Q) 2.49 2.5 2.51 V IP=0 3
System bandwidth BW 250 kHz -3dB 3
Total output error (20B series) ETOT -3 3 % 3
Sensitivity (20B series) Sens 97 100 103 mV/A Full current range 3
Zero current differential output error (20B series) VOE -25 25 mV 3
Supply voltage (absolute maximum) VCC 7 V 2
Output voltage VOUT -0.3 V Upper limit printed as VCC+0.3 2
Output source current IOUT(SOURCE) 6 mA 2
Output sink current IOUT(SINK) 30 mA 2
Universal insulation voltage VISO 3500 VRMS 2
Input current peak IPEAK 100 A 3 seconds 2
Input current continuous ICON 40 A 2
Operating ambient temperature (absolute maximum) TA -40 125 °C 2
Maximum junction temperature TJ 165 °C 2
Storage ambient temperature TS -55 150 °C 2
Electrostatic protection ESD(HBM) 4000 V HBM 2
Input voltage VIN+,VIN- -600 600 VPK 2
Input current (DC/AC RMS) IP -50 50 A 2
Supply voltage (recommended) VCC 4.5 5.5 V 2
Ambient temperature (recommended) TA -40 125 °C 2
Dielectric strength test voltage VISO 3500 VRMS Type test 50/60Hz, 1min 2
Dielectric strength test voltage (100% production) VTEST 3900 VRMS t = 1s (100% production) 2
Electrical clearance 3.8 mm Minimum distance from input to output 2
Maximum isolation voltage (AC bipolar) VIORM 600 VPK AC voltage (bipolar) 2
Maximum operating isolation voltage (AC sine wave) VIOWM 424 VRMS AC voltage (sine wave) 2
Maximum transient isolation voltage (type test) VIOTM 4949 VPK Type test, t = 60s 2
Maximum transient isolation voltage (100% production) VIOTM 5515 VPK t = 1s (100% production) 2
Maximum surge isolation voltage VIOSM 7000 VPK Type test, 1.2 µs (rise) / 50 µs (width) 2
Inrush current ISURGE 7.5 kA Type test coincidence IEC 61000-4-5, 8 µs (rise) / 20 µs (width) 2

CAD (KiCad official)

  • Symbol: HX724-20B-S
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hx724-20b-s-etched.step / hx724-20b-s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx724-20b-s.step / hx724-20b-s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ZHHXDZ datasheet (6 pp, sha256 a0ce11e806a3a70c, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF