3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHT7136ANZ
HTCSEMI · Analog To Digital Converters (ADCs) · DIP-40
HT7136ANZ from HTCSEMI, in a DIP-40. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Positive power supply; V+ to V- is rated 15V max and 9V nominal. |
| 2 | D1 | output | Output driver for segment D of the display units digit. |
| 3 | C1 | output | Output driver for segment C of the display units digit. |
| 4 | B1 | output | Output driver for segment B of the display units digit. |
| 5 | A1 | output | Output driver for segment A of the display units digit. |
| 6 | F1 | output | Output driver for segment F of the display units digit. |
| 7 | G1 | output | Output driver for segment G of the display units digit. |
| 8 | E1 | output | Output driver for segment E of the display units digit. |
| 9 | D2 | output | Output driver for segment D of the display tens digit. |
| 10 | C2 | output | Output driver for segment C of the display tens digit. |
| 11 | B2 | output | Output driver for segment B of the display tens digit. |
| 12 | A2 | output | Output driver for segment A of the display tens digit. |
| 13 | F2 | output | Output driver for segment F of the display tens digit. |
| 14 | E2 | output | Output driver for segment E of the display tens digit. |
| 15 | D3 | output | Output driver for segment D of the display hundreds digit. |
| 16 | B3 | output | Output driver for segment B of the display hundreds digit. |
| 17 | F3 | output | Output driver for segment F of the display hundreds digit. |
| 18 | E3 | output | Output driver for segment E of the display hundreds digit. |
| 19 | AB4 | output | Output driver for both A and B segments of the display thousands digit. |
| 20 | POL | output | Output driver for the negative sign of the display, on for negative analog inputs. |
| 21 | BP/GND | output | Output driver for the LCD backplane (also listed as power supply ground), a square wave of about 5V nominal amplitude at the clock frequency divided by 800. |
| 22 | G3 | output | Output driver for segment G of the display hundreds digit. |
| 23 | A3 | output | Output driver for segment A of the display hundreds digit. |
| 24 | C3 | output | Output driver for segment C of the display hundreds digit. |
| 25 | G2 | output | Output driver for segment G of the display tens digit. |
| 26 | V- | power_in | Negative power supply. |
| 27 | INT | output | Integrator amplifier output, to be connected to the integrating capacitor. |
| 28 | BUFF | output | Input buffer amplifier output, to be connected to the integrating resistor. |
| 29 | A-Z | input | Integrator amplifier input, to be connected to the auto-zero capacitor. |
| 30 | IN LO | input | Differential input low; connect to the input voltage to be measured, LO/HI designators are for reference only and do not imply lower potential. |
| 31 | IN HI | input | Differential input high; connect to the input voltage to be measured, with common mode range up to 1V from either supply. |
| 32 | COMMON | power_out | Internal analog common voltage reference output, about 2.8V below V+ with 15 ohm output impedance and about 3mA sink capability. |
| 33 | CREF- | passive | Negative connection pin for the reference capacitor (0.1uF to 1uF). |
| 34 | CREF+ | passive | Positive connection pin for the reference capacitor (0.1uF to 1uF). |
| 35 | REF LO | input | Reference voltage input low; REF HI should be positive relative to REF LO. |
| 36 | REF HI | input | Reference voltage input high; REF HI should be positive relative to REF LO. |
| 37 | TEST | input | Display test input that turns on all segments when tied to V+; also a digital supply tap through 500 ohms with no more than 1mA load. |
| 38 | OSC3 | output | Device clock generator circuit connection pin (oscillator output). |
| 39 | OSC2 | output | Device clock generator circuit connection pin (oscillator output). |
| 40 | OSC1 | input | Device clock generator circuit connection pin (oscillator input, or external clock input). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | DIP-40 |
| Category | Data Converters |
| Pins | 40 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Zero Input Reading | 0 | 0 | 0 | Digital Reading | VIN = 0V, Full Scale = 200mV | 3 | |
| Rollover Error | 0.2 | 1 | Counts | -VIN = +VIN ≈ 200mV, difference in reading for equal positive and negative inputs near full scale | 3 | ||
| Linearity | 0.2 | 1 | Counts | Full Scale = 200mV or Full Scale = 2V, maximum deviation from best straight line fit (Note 5) | 3 | ||
| Common Mode Rejection Ratio | CMRR | 50 | µV/V | VCM = 1V, VIN = 0V, Full Scale = 200mV (Note 5) | 3 | ||
| Noise | 15 | µV | VIN = 0V, Full Scale = 200mV (peak-to-peak value not exceeded 95% of time) (Note 5) | 3 | |||
| Leakage Current Input | 1 | 10 | pA | VIN = 0V (Note 5) | 3 | ||
| Zero Reading Drift | 0.2 | 1 | µV/°C | VIN = 0V, 0°C to 70°C (Note 5) | 3 | ||
| Scale Factor Temperature Coefficient | 1 | 5 | ppm/°C | VIN = 199mV, 0°C to 70°C, (Ext. Ref. 0ppm/°C) (Note 5) | 3 | ||
| Analog Common Voltage | 2.4 | 3 | 3.2 | V | 25kΩ between Common and Positive Supply (with respect to + Supply) | 3 | |
| Temperature Coefficient of Analog Common | 150 | ppm/°C | 25kΩ between Common and Positive Supply (with respect to + Supply) (Note 5) | 3 | |||
| V+ Supply Current | 70 | 100 | µA | VIN = 0 (does not include Common current), 16kHz oscillator (Note 6) | 3 | ||
| Peak-To-Peak Segment Drive Voltage and Backplane Drive Voltage | 4 | 5.5 | 6 | V | V+ to V- = 9V (Note 4) | 3 | |
| Supply Voltage (V+ to V-) | 15 | V | HT7136A, V+ to V- | 3 | |||
| Operating Temperature Range | 0 | 70 | °C | Operating Conditions | 3 | ||
| Operating Temperature Range (ordering information) | TA | -45 | 85 | °C | for all packages | 1 | |
| Maximum Junction Temperature | 150 | °C | 3 | ||||
| Maximum Storage Temperature | -65 | 150 | °C | 3 | |||
| Maximum Lead Temperature | 300 | °C | Soldering 10s | 3 | |||
| Thermal Resistance PDIP | θJA | 50 | °C/W | Typical, Note 2 | 3 |
CAD (KiCad official)
- Symbol:
HT7136ANZ - Footprint:
Package_DIP:DIP-40_W15.24mm - 3D model: DIP-40_W15.24mm (KiCad packages3D, STEP)
- 3D model files:
ht7136anz-etched.step/ht7136anz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht7136anz.step/ht7136anz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (15 pp, sha256
46d5381b55928849, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).