Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HT7136ANZ

HTCSEMI · Analog To Digital Converters (ADCs) · DIP-40

HT7136ANZ from HTCSEMI, in a DIP-40. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 V+ power_in Positive power supply; V+ to V- is rated 15V max and 9V nominal.
2 D1 output Output driver for segment D of the display units digit.
3 C1 output Output driver for segment C of the display units digit.
4 B1 output Output driver for segment B of the display units digit.
5 A1 output Output driver for segment A of the display units digit.
6 F1 output Output driver for segment F of the display units digit.
7 G1 output Output driver for segment G of the display units digit.
8 E1 output Output driver for segment E of the display units digit.
9 D2 output Output driver for segment D of the display tens digit.
10 C2 output Output driver for segment C of the display tens digit.
11 B2 output Output driver for segment B of the display tens digit.
12 A2 output Output driver for segment A of the display tens digit.
13 F2 output Output driver for segment F of the display tens digit.
14 E2 output Output driver for segment E of the display tens digit.
15 D3 output Output driver for segment D of the display hundreds digit.
16 B3 output Output driver for segment B of the display hundreds digit.
17 F3 output Output driver for segment F of the display hundreds digit.
18 E3 output Output driver for segment E of the display hundreds digit.
19 AB4 output Output driver for both A and B segments of the display thousands digit.
20 POL output Output driver for the negative sign of the display, on for negative analog inputs.
21 BP/GND output Output driver for the LCD backplane (also listed as power supply ground), a square wave of about 5V nominal amplitude at the clock frequency divided by 800.
22 G3 output Output driver for segment G of the display hundreds digit.
23 A3 output Output driver for segment A of the display hundreds digit.
24 C3 output Output driver for segment C of the display hundreds digit.
25 G2 output Output driver for segment G of the display tens digit.
26 V- power_in Negative power supply.
27 INT output Integrator amplifier output, to be connected to the integrating capacitor.
28 BUFF output Input buffer amplifier output, to be connected to the integrating resistor.
29 A-Z input Integrator amplifier input, to be connected to the auto-zero capacitor.
30 IN LO input Differential input low; connect to the input voltage to be measured, LO/HI designators are for reference only and do not imply lower potential.
31 IN HI input Differential input high; connect to the input voltage to be measured, with common mode range up to 1V from either supply.
32 COMMON power_out Internal analog common voltage reference output, about 2.8V below V+ with 15 ohm output impedance and about 3mA sink capability.
33 CREF- passive Negative connection pin for the reference capacitor (0.1uF to 1uF).
34 CREF+ passive Positive connection pin for the reference capacitor (0.1uF to 1uF).
35 REF LO input Reference voltage input low; REF HI should be positive relative to REF LO.
36 REF HI input Reference voltage input high; REF HI should be positive relative to REF LO.
37 TEST input Display test input that turns on all segments when tied to V+; also a digital supply tap through 500 ohms with no more than 1mA load.
38 OSC3 output Device clock generator circuit connection pin (oscillator output).
39 OSC2 output Device clock generator circuit connection pin (oscillator output).
40 OSC1 input Device clock generator circuit connection pin (oscillator input, or external clock input).

Key specifications

Parameter Value
Manufacturer HTCSEMI
Package DIP-40
Category Data Converters
Pins 40

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Zero Input Reading 0 0 0 Digital Reading VIN = 0V, Full Scale = 200mV 3
Rollover Error 0.2 1 Counts -VIN = +VIN ≈ 200mV, difference in reading for equal positive and negative inputs near full scale 3
Linearity 0.2 1 Counts Full Scale = 200mV or Full Scale = 2V, maximum deviation from best straight line fit (Note 5) 3
Common Mode Rejection Ratio CMRR 50 µV/V VCM = 1V, VIN = 0V, Full Scale = 200mV (Note 5) 3
Noise 15 µV VIN = 0V, Full Scale = 200mV (peak-to-peak value not exceeded 95% of time) (Note 5) 3
Leakage Current Input 1 10 pA VIN = 0V (Note 5) 3
Zero Reading Drift 0.2 1 µV/°C VIN = 0V, 0°C to 70°C (Note 5) 3
Scale Factor Temperature Coefficient 1 5 ppm/°C VIN = 199mV, 0°C to 70°C, (Ext. Ref. 0ppm/°C) (Note 5) 3
Analog Common Voltage 2.4 3 3.2 V 25kΩ between Common and Positive Supply (with respect to + Supply) 3
Temperature Coefficient of Analog Common 150 ppm/°C 25kΩ between Common and Positive Supply (with respect to + Supply) (Note 5) 3
V+ Supply Current 70 100 µA VIN = 0 (does not include Common current), 16kHz oscillator (Note 6) 3
Peak-To-Peak Segment Drive Voltage and Backplane Drive Voltage 4 5.5 6 V V+ to V- = 9V (Note 4) 3
Supply Voltage (V+ to V-) 15 V HT7136A, V+ to V- 3
Operating Temperature Range 0 70 °C Operating Conditions 3
Operating Temperature Range (ordering information) TA -45 85 °C for all packages 1
Maximum Junction Temperature 150 °C 3
Maximum Storage Temperature -65 150 °C 3
Maximum Lead Temperature 300 °C Soldering 10s 3
Thermal Resistance PDIP θJA 50 °C/W Typical, Note 2 3

CAD (KiCad official)

  • Symbol: HT7136ANZ
  • Footprint: Package_DIP:DIP-40_W15.24mm
  • 3D model: DIP-40_W15.24mm (KiCad packages3D, STEP)
  • 3D model files: ht7136anz-etched.step / ht7136anz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht7136anz.step / ht7136anz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTCSEMI datasheet (15 pp, sha256 46d5381b55928849, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF