3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLE9221SXXUMA2
Infineon Technologies · RF Transceiver ICs · SSOP-16-208mil
TLE9221SXXUMA2 from Infineon Technologies, in a SSOP-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INH | output | Inhibit output, open drain output to control external circuitry, high impedance in BD_Sleep mode. |
| 2 | EN | input | Enable mode control input for mode selection, with integrated pull-down resistor to GND. |
| 3 | VIO | power_in | Level shift input, reference voltage for the digital input and output pins, 100 nF decoupling capacitor to GND recommended. |
| 4 | TxD | input | Transmit data input with integrated pull-down current source to GND, logical low drives Data_0 to the FlexRay bus. |
| 5 | TxEN | input | Transmitter enable not input with integrated pull-up current source to VIO, logical low enables the Transmitter. |
| 6 | RxD | output | Receive data output, logical low while Data_0 is on the FlexRay bus, output voltage adapted to the voltage on VIO. |
| 7 | BGE | input | Bus Guardian enable input, logical high enables the Transmitter, with integrated pull-down current source to GND. |
| 8 | STBN | input | Stand-by not mode control input for mode selection, with integrated pull-down current source to GND. |
| 9 | RxEN | output | Receive data enable not output, logical low indicates activity on the FlexRay bus and high when the bus is Idle, output voltage adapted to VIO. |
| 10 | ERRN | output | Error not diagnosis output, logical low in failure case, output voltage adapted to the voltage on VIO. |
| 11 | VBAT | power_in | Battery voltage supply, 100 nF decoupling capacitor to GND recommended. |
| 12 | WAKE | input | Local wake-up input, terminated against GND and VBAT, sensitive to signal changes in both directions. |
| 13 | GND | power_in | Ground. |
| 14 | BM | bidirectional | Bus line minus, negative input/output to the FlexRay bus. |
| 15 | BP | bidirectional | Bus line plus, positive input/output to the FlexRay bus. |
| 16 | VCC | power_in | Transmitter supply voltage, 100 nF decoupling capacitor to GND recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | SSOP-16-208mil |
| Category | RF & Radio |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
TLE9221SXXUMA2 - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-208mil (KiCad packages3D, STEP)
- 3D model files:
tle9221sxxuma2-etched.step/tle9221sxxuma2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tle9221sxxuma2.step/tle9221sxxuma2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (99 pp, sha256
a9f96e4b9c3099b0, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).