main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tle9221sxxuma2: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json tle9221sxxuma2: model_3d_plain back to tle9221sxxuma2.glb (it named the etched GLB, adom/wiki#286) · Ray
README.md tle9221sxxuma2: the pins were read twice by one model (sonnet); say so instead of 'cross-checked by two models' · Ray
tle9221sxxuma2-etched.glb Publish 0.1.0 · Ray
tle9221sxxuma2-etched.step tle9221sxxuma2: factory component page (tier=lcsc) · Ray
tle9221sxxuma2-hero.glb tle9221sxxuma2: hero GLB from the etched model (keeps the MPN mark) · Ray
tle9221sxxuma2-hero.overlay.json Publish 0.1.0 · Ray
tle9221sxxuma2.glb Publish 0.1.0 · Ray
tle9221sxxuma2.kicad_mod Publish 0.1.0 · Ray
tle9221sxxuma2.kicad_sym Publish 0.1.0 · Ray
tle9221sxxuma2.lbr Publish 0.1.0 · Ray
tle9221sxxuma2.step Publish 0.1.0 · Ray

TLE9221SXXUMA2

Infineon Technologies · RF Transceiver ICs · SSOP-16-208mil

TLE9221SXXUMA2 from Infineon Technologies, in a SSOP-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INH output Inhibit output, open drain output to control external circuitry, high impedance in BD_Sleep mode.
2 EN input Enable mode control input for mode selection, with integrated pull-down resistor to GND.
3 VIO power_in Level shift input, reference voltage for the digital input and output pins, 100 nF decoupling capacitor to GND recommended.
4 TxD input Transmit data input with integrated pull-down current source to GND, logical low drives Data_0 to the FlexRay bus.
5 TxEN input Transmitter enable not input with integrated pull-up current source to VIO, logical low enables the Transmitter.
6 RxD output Receive data output, logical low while Data_0 is on the FlexRay bus, output voltage adapted to the voltage on VIO.
7 BGE input Bus Guardian enable input, logical high enables the Transmitter, with integrated pull-down current source to GND.
8 STBN input Stand-by not mode control input for mode selection, with integrated pull-down current source to GND.
9 RxEN output Receive data enable not output, logical low indicates activity on the FlexRay bus and high when the bus is Idle, output voltage adapted to VIO.
10 ERRN output Error not diagnosis output, logical low in failure case, output voltage adapted to the voltage on VIO.
11 VBAT power_in Battery voltage supply, 100 nF decoupling capacitor to GND recommended.
12 WAKE input Local wake-up input, terminated against GND and VBAT, sensitive to signal changes in both directions.
13 GND power_in Ground.
14 BM bidirectional Bus line minus, negative input/output to the FlexRay bus.
15 BP bidirectional Bus line plus, positive input/output to the FlexRay bus.
16 VCC power_in Transmitter supply voltage, 100 nF decoupling capacitor to GND recommended.

Key specifications

Parameter Value
Manufacturer Infineon Technologies
Package SSOP-16-208mil
Category RF & Radio
Pins 16

CAD (KiCad official)

  • Symbol: TLE9221SXXUMA2
  • Footprint: Package_SO:SSOP-16_5.3x6.2mm_P0.65mm
  • 3D model: SSOP-16-208mil (KiCad packages3D, STEP)
  • 3D model files: tle9221sxxuma2-etched.step / tle9221sxxuma2-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tle9221sxxuma2.step / tle9221sxxuma2.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon Technologies datasheet (99 pp, sha256 a9f96e4b9c3099b0, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF