Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

FT601Q-B-T

FTDI · USB Converters · QFN-76-EP(9x9)

FT601Q-B-T from FTDI, in a QFN-76-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground; the datasheet specifies no voltage for this pin.
2 AVDD power_in +1.0V power input for the PLL.
3 VD10 power_in +1.0V core voltage input.
4 BE_0 bidirectional Parallel FIFO bus byte enable I/O bit 0.
5 BE_1 bidirectional Parallel FIFO bus byte enable I/O bit 1.
6 BE_2 bidirectional Parallel FIFO bus byte enable I/O bit 2 (QFN-76 32-bit interface only).
7 BE_3 bidirectional Parallel FIFO bus byte enable I/O bit 3 (QFN-76 32-bit interface only).
8 TXE_N output 245 Synchronous FIFO mode Transmit FIFO Empty output, active low, indicating at least 1 byte of space is available to write; in Multi-Channel FIFO mode it is an optional Status Valid output.
9 RXF_N output 245 Synchronous FIFO mode Receive FIFO Full output, active low, indicating at least 1 byte of data is available to read; in Multi-Channel FIFO mode it is the Data Receive Acknowledge output.
10 SIWU_N input Reserved pin; add an external pull-up in normal operation.
11 WR_N input 245 Synchronous FIFO mode Write Enable input, active low; in Multi-Channel FIFO mode it is the Data Transaction Request input, active low.
12 RD_N input 245 Synchronous FIFO mode Read Enable input, active low.
13 OE_N input 245 Synchronous FIFO mode Data Output Enable input, active low; when driven low the slave drives the data and byte enable buses.
14 VCCIO power_in Power input for the I/O block, supporting +1.8V, +2.5V or +3.3V.
15 RESET_N input Chip reset input, active low.
16 WAKEUP_N bidirectional Suspend/remote wakeup pin, low by default when USB is active and high in USB suspend; driving it low in suspend requests a resume from the USB host.
17 GPIO0 bidirectional Configurable GPIO port 0; together with GPIO1 it selects the chip mode at power-up.
18 GPIO1 bidirectional Configurable GPIO port 1; together with GPIO0 it selects the chip mode at power-up.
19 Reserved unconnected Reserved; do not connect.
20 VCC33 power_in +3.3V power input for the chip and internal LDO.
21 XI input Crystal input for the internal oscillator; recommended crystal is 30 MHz ±20 ppm, 18 pF, connected across XI and XO.
22 XO output Crystal output for the internal oscillator; the crystal cannot be replaced by an oscillator by tying XO to GND.
23 DP bidirectional High-speed USB differential transceiver (positive).
24 VCC33 power_in +3.3V power input for the chip and internal LDO.
25 DM bidirectional High-speed USB differential transceiver (negative).
26 GND power_in Ground.
27 RREF input PHY reference resistor input; connect a 1.6 kΩ 1% resistor to ground to provide the reference voltage for the USB2 PHY.
28 VDDA power_in +3.3V power input for the USB2.0 and USB3.0 PHYs.
29 GND power_in Ground.
30 VD10 power_in +1.0V core voltage input.
31 TODN output SuperSpeed USB transmitter differential pair (negative).
32 TODP output SuperSpeed USB transmitter differential pair (positive).
33 VD10 power_in +1.0V core voltage input.
34 RIDN input SuperSpeed USB receiver differential pair (negative).
35 RIDP input SuperSpeed USB receiver differential pair (positive).
36 GND power_in Ground.
37 VBUS power_in USB bus power input.
38 VCC33 power_in +3.3V power input for the chip and internal LDO.
39 DV10 power_out +1.0V power output from the internal LDO; the datasheet recommends connecting it to VD10 and AVDD with a 4.7 µF capacitor to ground.
40 DATA_0 bidirectional Parallel FIFO bus data I/O bit 0.
41 DATA_1 bidirectional Parallel FIFO bus data I/O bit 1.
42 DATA_2 bidirectional Parallel FIFO bus data I/O bit 2.
43 DATA_3 bidirectional Parallel FIFO bus data I/O bit 3.
44 DATA_4 bidirectional Parallel FIFO bus data I/O bit 4.
45 DATA_5 bidirectional Parallel FIFO bus data I/O bit 5.
46 DATA_6 bidirectional Parallel FIFO bus data I/O bit 6.
47 DATA_7 bidirectional Parallel FIFO bus data I/O bit 7.
48 VD10 power_in +1.0V core voltage input.
49 VCCIO power_in Power input for the I/O block, supporting +1.8V, +2.5V or +3.3V.
50 DATA_8 bidirectional Parallel FIFO bus data I/O bit 8.
51 DATA_9 bidirectional Parallel FIFO bus data I/O bit 9.
52 DATA_10 bidirectional Parallel FIFO bus data I/O bit 10.
53 DATA_11 bidirectional Parallel FIFO bus data I/O bit 11.
54 DATA_12 bidirectional Parallel FIFO bus data I/O bit 12.
55 DATA_13 bidirectional Parallel FIFO bus data I/O bit 13.
56 DATA_14 bidirectional Parallel FIFO bus data I/O bit 14.
57 DATA_15 bidirectional Parallel FIFO bus data I/O bit 15.
58 CLK output Parallel FIFO bus clock output to the FIFO bus master, configurable as 66 MHz or 100 MHz for both FIFO bus modes (100 MHz only at 2.5V and 3.3V I/O).
59 VCCIO power_in Power input for the I/O block, supporting +1.8V, +2.5V or +3.3V.
60 DATA_16 bidirectional Parallel FIFO bus data I/O bit 16 (32-bit FIFO interface, QFN-76 only).
61 DATA_17 bidirectional Parallel FIFO bus data I/O bit 17 (32-bit FIFO interface, QFN-76 only).
62 DATA_18 bidirectional Parallel FIFO bus data I/O bit 18 (32-bit FIFO interface, QFN-76 only).
63 DATA_19 bidirectional Parallel FIFO bus data I/O bit 19 (32-bit FIFO interface, QFN-76 only).
64 DATA_20 bidirectional Parallel FIFO bus data I/O bit 20 (32-bit FIFO interface, QFN-76 only).
65 DATA_21 bidirectional Parallel FIFO bus data I/O bit 21 (32-bit FIFO interface, QFN-76 only).
66 DATA_22 bidirectional Parallel FIFO bus data I/O bit 22 (32-bit FIFO interface, QFN-76 only).
67 DATA_23 bidirectional Parallel FIFO bus data I/O bit 23 (32-bit FIFO interface, QFN-76 only).
68 VCCIO power_in Power input for the I/O block, supporting +1.8V, +2.5V or +3.3V.
69 DATA_24 bidirectional Parallel FIFO bus data I/O bit 24 (32-bit FIFO interface, QFN-76 only).
70 DATA_25 bidirectional Parallel FIFO bus data I/O bit 25 (32-bit FIFO interface, QFN-76 only).
71 DATA_26 bidirectional Parallel FIFO bus data I/O bit 26 (32-bit FIFO interface, QFN-76 only).
72 DATA_27 bidirectional Parallel FIFO bus data I/O bit 27 (32-bit FIFO interface, QFN-76 only).
73 DATA_28 bidirectional Parallel FIFO bus data I/O bit 28 (32-bit FIFO interface, QFN-76 only).
74 DATA_29 bidirectional Parallel FIFO bus data I/O bit 29 (32-bit FIFO interface, QFN-76 only).
75 DATA_30 bidirectional Parallel FIFO bus data I/O bit 30 (32-bit FIFO interface, QFN-76 only).
76 DATA_31 bidirectional Parallel FIFO bus data I/O bit 31 (32-bit FIFO interface, QFN-76 only).
77 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer FTDI
Package QFN-76-EP(9x9)
Category Interface
Pins 77

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature -65 150 °C 19
Ambient Operating Temperature (Power Applied) -40 85 °C Power Applied 19
VCC33/VDDA Supply Voltage VCC33/VDDA -0.3 4.6 V 19
VCCIO Supply Voltage VCCIO -0.3 4 V 19
VD10 Core Supply Voltage VD10 -0.5 1.4 V 19
AVDD PLL Supply Voltage AVDD -0.5 1.4 V 19
IOs DC Input Voltage -0.5 V 19
VCC33/VDDA VCC Operating Supply Voltage VCC33/VDDA 3 3.3 3.6 V 20
VCCIO Operating Supply Voltage VCCIO_1 3 3.3 3.6 V VCCIO=3.3V 20
VCCIO Operating Supply Voltage VCCIO_2 2.3 2.5 2.7 V VCCIO=2.5V 20
VCCIO Operating Supply Voltage VCCIO_3 1.65 1.8 1.95 V VCCIO=1.8V 20
Core/PLL Operating Supply Voltage VD10/AVDD 0.9 1 1.1 V 20
VCCIO Operating Supply Voltage VCCIO_3.3V 3 3.3 3.6 V Normal Operation 21
VCCIO Operating Supply Voltage VCCIO_2.5V 2.3 2.5 2.7 V Normal Operation 21
VCCIO Operating Supply Voltage VCCIO_1.8V 1.65 1.8 1.95 V Normal Operation 21
Input/output Leakage Iin/Iout(3.3V) -10 10 uA Without pull-up/down 21
Input pull-up/pull down resistance Rpu/Rpd 30 50 75 KΩ Vout=0~VCCIO 21
Output drive strength Iout(VCCIO=3.3V) 10 mA Total current 21
Output drive strength Iout(VCCIO=2.5V) 9.4 mA Total current 21
Output drive strength Iout(VCCIO=1.8V) 5 mA Total current 21
Pin Capacitance Cp 2 pF 21
Slave Drive Data Set Up Time T1 3 ns 17
Slave Drive Data Hold Time T2 3.5 ns 17
Master Drive Data Set Up Time T3 1 ns 17
Master Drive Data Hold Time T4 4.8 ns 17
Human Body Mode (HBM) ESD -2 2 kV JEDEC EIA/JESD22-A114-B, Class 2 19
Machine mode (MM) ESD -200 200 V JEDEC EIA/JESD22-A115-A, Class B 19
Charged Device Mode (CDM) ESD -500 500 V JEDEC EIA/JESD22-C101-D, Class-III 19
Latch-up -200 200 mA JESD78, Trigger Class-II 19
VCCIO Operating Supply Current Iccio_2 9.5 mA Data transfer 20
VCCIO Operating Supply Current Iccio_3 70 μA USB Suspend 20
VCC Operating Supply Current Icc_1 70 mA Idle, SuperSpeed 20
VCC Operating Supply Current Icc_2 65 mA Idle, High Speed 20
VCC Operating Supply Current Icc_3 185 mA Active, SuperSpeed, Multi-Channel FIFO mode 20
VCC Operating Supply Current Icc_3 4 mA USB Suspend 20
VCCIO Operating Supply Current Iccio_1 4.5 mA No data transfer 20
RREF external PHY reference resistor RREF 1.6 KΩ Connected to ground 10
RREF external resistor tolerance RREF -1 1 % 1% resistor 10
DV10 external decoupling capacitor DV10 4.7 uF Cap to ground, recommended 10
Crystal frequency 30 MHz Across XI and XO 18
Crystal frequency tolerance -20 20 ppm 18
Crystal operating temperature -40 85 °C Crystal 18
Crystal load capacitance 18 pF 18

CAD (KiCad official)

  • Symbol: FT601Q-B-T
  • Footprint: Package_DFN_QFN:QFN-76-1EP_9x9mm_P0.4mm_EP3.8x3.8mm
  • 3D model: QFN-76-EP(9x9) (KiCad packages3D, STEP)
  • 3D model files: ft601q-b-t-etched.step / ft601q-b-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ft601q-b-t.step / ft601q-b-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: FTDI datasheet (33 pp, sha256 9b5b76cc23a65d5e, retrieved 2026-11-11, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF