component
FT601Q-B-T
Public Made by Adomby adom
FTDI USB Converters, QFN-76-EP(9x9). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
FT601Q-B-T
FTDI · USB Converters · QFN-76-EP(9x9)
FT601Q-B-T from FTDI, in a QFN-76-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground; the datasheet specifies no voltage for this pin. |
| 2 | AVDD | power_in | +1.0V power input for the PLL. |
| 3 | VD10 | power_in | +1.0V core voltage input. |
| 4 | BE_0 | bidirectional | Parallel FIFO bus byte enable I/O bit 0. |
| 5 | BE_1 | bidirectional | Parallel FIFO bus byte enable I/O bit 1. |
| 6 | BE_2 | bidirectional | Parallel FIFO bus byte enable I/O bit 2 (QFN-76 32-bit interface only). |
| 7 | BE_3 | bidirectional | Parallel FIFO bus byte enable I/O bit 3 (QFN-76 32-bit interface only). |
| 8 | TXE_N | output | 245 Synchronous FIFO mode Transmit FIFO Empty output, active low, indicating at least 1 byte of space is available to write; in Multi-Channel FIFO mode it is an optional Status Valid output. |
| 9 | RXF_N | output | 245 Synchronous FIFO mode Receive FIFO Full output, active low, indicating at least 1 byte of data is available to read; in Multi-Channel FIFO mode it is the Data Receive Acknowledge output. |
| 10 | SIWU_N | input | Reserved pin; add an external pull-up in normal operation. |
| 11 | WR_N | input | 245 Synchronous FIFO mode Write Enable input, active low; in Multi-Channel FIFO mode it is the Data Transaction Request input, active low. |
| 12 | RD_N | input | 245 Synchronous FIFO mode Read Enable input, active low. |
| 13 | OE_N | input | 245 Synchronous FIFO mode Data Output Enable input, active low; when driven low the slave drives the data and byte enable buses. |
| 14 | VCCIO | power_in | Power input for the I/O block, supporting +1.8V, +2.5V or +3.3V. |
| 15 | RESET_N | input | Chip reset input, active low. |
| 16 | WAKEUP_N | bidirectional | Suspend/remote wakeup pin, low by default when USB is active and high in USB suspend; driving it low in suspend requests a resume from the USB host. |
| 17 | GPIO0 | bidirectional | Configurable GPIO port 0; together with GPIO1 it selects the chip mode at power-up. |
| 18 | GPIO1 | bidirectional | Configurable GPIO port 1; together with GPIO0 it selects the chip mode at power-up. |
| 19 | Reserved | unconnected | Reserved; do not connect. |
| 20 | VCC33 | power_in | +3.3V power input for the chip and internal LDO. |
| 21 | XI | input | Crystal input for the internal oscillator; recommended crystal is 30 MHz ±20 ppm, 18 pF, connected across XI and XO. |
| 22 | XO | output | Crystal output for the internal oscillator; the crystal cannot be replaced by an oscillator by tying XO to GND. |
| 23 | DP | bidirectional | High-speed USB differential transceiver (positive). |
| 24 | VCC33 | power_in | +3.3V power input for the chip and internal LDO. |
| 25 | DM | bidirectional | High-speed USB differential transceiver (negative). |
| 26 | GND | power_in | Ground. |
| 27 | RREF | input | PHY reference resistor input; connect a 1.6 kΩ 1% resistor to ground to provide the reference voltage for the USB2 PHY. |
| 28 | VDDA | power_in | +3.3V power input for the USB2.0 and USB3.0 PHYs. |
| 29 | GND | power_in | Ground. |
| 30 | VD10 | power_in | +1.0V core voltage input. |
| 31 | TODN | output | SuperSpeed USB transmitter differential pair (negative). |
| 32 | TODP | output | SuperSpeed USB transmitter differential pair (positive). |
| 33 | VD10 | power_in | +1.0V core voltage input. |
| 34 | RIDN | input | SuperSpeed USB receiver differential pair (negative). |
| 35 | RIDP | input | SuperSpeed USB receiver differential pair (positive). |
| 36 | GND | power_in | Ground. |
| 37 | VBUS | power_in | USB bus power input. |
| 38 | VCC33 | power_in | +3.3V power input for the chip and internal LDO. |
| 39 | DV10 | power_out | +1.0V power output from the internal LDO; the datasheet recommends connecting it to VD10 and AVDD with a 4.7 µF capacitor to ground. |
| 40 | DATA_0 | bidirectional | Parallel FIFO bus data I/O bit 0. |
| 41 | DATA_1 | bidirectional | Parallel FIFO bus data I/O bit 1. |
| 42 | DATA_2 | bidirectional | Parallel FIFO bus data I/O bit 2. |
| 43 | DATA_3 | bidirectional | Parallel FIFO bus data I/O bit 3. |
| 44 | DATA_4 | bidirectional | Parallel FIFO bus data I/O bit 4. |
| 45 | DATA_5 | bidirectional | Parallel FIFO bus data I/O bit 5. |
| 46 | DATA_6 | bidirectional | Parallel FIFO bus data I/O bit 6. |
| 47 | DATA_7 | bidirectional | Parallel FIFO bus data I/O bit 7. |
| 48 | VD10 | power_in | +1.0V core voltage input. |
| 49 | VCCIO | power_in | Power input for the I/O block, supporting +1.8V, +2.5V or +3.3V. |
| 50 | DATA_8 | bidirectional | Parallel FIFO bus data I/O bit 8. |
| 51 | DATA_9 | bidirectional | Parallel FIFO bus data I/O bit 9. |
| 52 | DATA_10 | bidirectional | Parallel FIFO bus data I/O bit 10. |
| 53 | DATA_11 | bidirectional | Parallel FIFO bus data I/O bit 11. |
| 54 | DATA_12 | bidirectional | Parallel FIFO bus data I/O bit 12. |
| 55 | DATA_13 | bidirectional | Parallel FIFO bus data I/O bit 13. |
| 56 | DATA_14 | bidirectional | Parallel FIFO bus data I/O bit 14. |
| 57 | DATA_15 | bidirectional | Parallel FIFO bus data I/O bit 15. |
| 58 | CLK | output | Parallel FIFO bus clock output to the FIFO bus master, configurable as 66 MHz or 100 MHz for both FIFO bus modes (100 MHz only at 2.5V and 3.3V I/O). |
| 59 | VCCIO | power_in | Power input for the I/O block, supporting +1.8V, +2.5V or +3.3V. |
| 60 | DATA_16 | bidirectional | Parallel FIFO bus data I/O bit 16 (32-bit FIFO interface, QFN-76 only). |
| 61 | DATA_17 | bidirectional | Parallel FIFO bus data I/O bit 17 (32-bit FIFO interface, QFN-76 only). |
| 62 | DATA_18 | bidirectional | Parallel FIFO bus data I/O bit 18 (32-bit FIFO interface, QFN-76 only). |
| 63 | DATA_19 | bidirectional | Parallel FIFO bus data I/O bit 19 (32-bit FIFO interface, QFN-76 only). |
| 64 | DATA_20 | bidirectional | Parallel FIFO bus data I/O bit 20 (32-bit FIFO interface, QFN-76 only). |
| 65 | DATA_21 | bidirectional | Parallel FIFO bus data I/O bit 21 (32-bit FIFO interface, QFN-76 only). |
| 66 | DATA_22 | bidirectional | Parallel FIFO bus data I/O bit 22 (32-bit FIFO interface, QFN-76 only). |
| 67 | DATA_23 | bidirectional | Parallel FIFO bus data I/O bit 23 (32-bit FIFO interface, QFN-76 only). |
| 68 | VCCIO | power_in | Power input for the I/O block, supporting +1.8V, +2.5V or +3.3V. |
| 69 | DATA_24 | bidirectional | Parallel FIFO bus data I/O bit 24 (32-bit FIFO interface, QFN-76 only). |
| 70 | DATA_25 | bidirectional | Parallel FIFO bus data I/O bit 25 (32-bit FIFO interface, QFN-76 only). |
| 71 | DATA_26 | bidirectional | Parallel FIFO bus data I/O bit 26 (32-bit FIFO interface, QFN-76 only). |
| 72 | DATA_27 | bidirectional | Parallel FIFO bus data I/O bit 27 (32-bit FIFO interface, QFN-76 only). |
| 73 | DATA_28 | bidirectional | Parallel FIFO bus data I/O bit 28 (32-bit FIFO interface, QFN-76 only). |
| 74 | DATA_29 | bidirectional | Parallel FIFO bus data I/O bit 29 (32-bit FIFO interface, QFN-76 only). |
| 75 | DATA_30 | bidirectional | Parallel FIFO bus data I/O bit 30 (32-bit FIFO interface, QFN-76 only). |
| 76 | DATA_31 | bidirectional | Parallel FIFO bus data I/O bit 31 (32-bit FIFO interface, QFN-76 only). |
| 77 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FTDI |
| Package | QFN-76-EP(9x9) |
| Category | Interface |
| Pins | 77 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | -65 | 150 | °C | 19 | |||
| Ambient Operating Temperature (Power Applied) | -40 | 85 | °C | Power Applied | 19 | ||
| VCC33/VDDA Supply Voltage | VCC33/VDDA | -0.3 | 4.6 | V | 19 | ||
| VCCIO Supply Voltage | VCCIO | -0.3 | 4 | V | 19 | ||
| VD10 Core Supply Voltage | VD10 | -0.5 | 1.4 | V | 19 | ||
| AVDD PLL Supply Voltage | AVDD | -0.5 | 1.4 | V | 19 | ||
| IOs DC Input Voltage | -0.5 | V | 19 | ||||
| VCC33/VDDA VCC Operating Supply Voltage | VCC33/VDDA | 3 | 3.3 | 3.6 | V | 20 | |
| VCCIO Operating Supply Voltage | VCCIO_1 | 3 | 3.3 | 3.6 | V | VCCIO=3.3V | 20 |
| VCCIO Operating Supply Voltage | VCCIO_2 | 2.3 | 2.5 | 2.7 | V | VCCIO=2.5V | 20 |
| VCCIO Operating Supply Voltage | VCCIO_3 | 1.65 | 1.8 | 1.95 | V | VCCIO=1.8V | 20 |
| Core/PLL Operating Supply Voltage | VD10/AVDD | 0.9 | 1 | 1.1 | V | 20 | |
| VCCIO Operating Supply Voltage | VCCIO_3.3V | 3 | 3.3 | 3.6 | V | Normal Operation | 21 |
| VCCIO Operating Supply Voltage | VCCIO_2.5V | 2.3 | 2.5 | 2.7 | V | Normal Operation | 21 |
| VCCIO Operating Supply Voltage | VCCIO_1.8V | 1.65 | 1.8 | 1.95 | V | Normal Operation | 21 |
| Input/output Leakage | Iin/Iout(3.3V) | -10 | 10 | uA | Without pull-up/down | 21 | |
| Input pull-up/pull down resistance | Rpu/Rpd | 30 | 50 | 75 | KΩ | Vout=0~VCCIO | 21 |
| Output drive strength | Iout(VCCIO=3.3V) | 10 | mA | Total current | 21 | ||
| Output drive strength | Iout(VCCIO=2.5V) | 9.4 | mA | Total current | 21 | ||
| Output drive strength | Iout(VCCIO=1.8V) | 5 | mA | Total current | 21 | ||
| Pin Capacitance | Cp | 2 | pF | 21 | |||
| Slave Drive Data Set Up Time | T1 | 3 | ns | 17 | |||
| Slave Drive Data Hold Time | T2 | 3.5 | ns | 17 | |||
| Master Drive Data Set Up Time | T3 | 1 | ns | 17 | |||
| Master Drive Data Hold Time | T4 | 4.8 | ns | 17 | |||
| Human Body Mode (HBM) ESD | -2 | 2 | kV | JEDEC EIA/JESD22-A114-B, Class 2 | 19 | ||
| Machine mode (MM) ESD | -200 | 200 | V | JEDEC EIA/JESD22-A115-A, Class B | 19 | ||
| Charged Device Mode (CDM) ESD | -500 | 500 | V | JEDEC EIA/JESD22-C101-D, Class-III | 19 | ||
| Latch-up | -200 | 200 | mA | JESD78, Trigger Class-II | 19 | ||
| VCCIO Operating Supply Current | Iccio_2 | 9.5 | mA | Data transfer | 20 | ||
| VCCIO Operating Supply Current | Iccio_3 | 70 | μA | USB Suspend | 20 | ||
| VCC Operating Supply Current | Icc_1 | 70 | mA | Idle, SuperSpeed | 20 | ||
| VCC Operating Supply Current | Icc_2 | 65 | mA | Idle, High Speed | 20 | ||
| VCC Operating Supply Current | Icc_3 | 185 | mA | Active, SuperSpeed, Multi-Channel FIFO mode | 20 | ||
| VCC Operating Supply Current | Icc_3 | 4 | mA | USB Suspend | 20 | ||
| VCCIO Operating Supply Current | Iccio_1 | 4.5 | mA | No data transfer | 20 | ||
| RREF external PHY reference resistor | RREF | 1.6 | KΩ | Connected to ground | 10 | ||
| RREF external resistor tolerance | RREF | -1 | 1 | % | 1% resistor | 10 | |
| DV10 external decoupling capacitor | DV10 | 4.7 | uF | Cap to ground, recommended | 10 | ||
| Crystal frequency | 30 | MHz | Across XI and XO | 18 | |||
| Crystal frequency tolerance | -20 | 20 | ppm | 18 | |||
| Crystal operating temperature | -40 | 85 | °C | Crystal | 18 | ||
| Crystal load capacitance | 18 | pF | 18 |
CAD (KiCad official)
- Symbol:
FT601Q-B-T - Footprint:
Package_DFN_QFN:QFN-76-1EP_9x9mm_P0.4mm_EP3.8x3.8mm - 3D model: QFN-76-EP(9x9) (KiCad packages3D, STEP)
- 3D model files:
ft601q-b-t-etched.step/ft601q-b-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ft601q-b-t.step/ft601q-b-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FTDI datasheet (33 pp, sha256
9b5b76cc23a65d5e, retrieved 2026-11-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).