Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP6547-I

Microchip Tech · Comparators · SOP-8

MCP6547-I from Microchip Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Comparator A digital output is CMOS open-drain and can level-shift up to 10V using a pull-up resistor.
2 VINA- input Inverting input of comparator A is a high-impedance CMOS input with low bias current.
3 VINA+ input Non-inverting input of comparator A is a high-impedance CMOS input with low bias current and greater than rail-to-rail operation (VSS - 0.3V to VDD + 0.3V).
4 VSS power_in Negative power supply pin, 1.6V to 5.5V below VDD; typically connected to ground in single-supply use.
5 VINB+ input Non-inverting input of comparator B is a high-impedance CMOS input with low bias current.
6 VINB- input Inverting input of comparator B is a high-impedance CMOS input with low bias current.
7 OUTB output Comparator B digital output is CMOS open-drain and can level-shift up to 10V using a pull-up resistor.
8 VDD power_in Positive power supply pin, 1.6V to 5.5V above VSS, requiring a 0.01 µF to 0.1 µF bypass capacitor within 2 mm.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 1.6 5.5 V VPU ≥ VDD 2
Quiescent Current (per comparator) IQ 0.3 0.6 1 µA IOUT = 0 2
Common Mode Rejection Ratio CMRR 55 70 dB VDD = 5V, VCM = -0.3V to 5.3V 2
Common Mode Rejection Ratio CMRR 50 65 dB VDD = 5V, VCM = 2.5V to 5.3V 2
Power Supply Rejection Ratio PSRR 63 80 dB VCM = VSS 2
Input Offset Voltage VOS -7 1.5 7 mV VCM = VSS (Note 1) 2
Input Hysteresis Voltage VHYST 1.5 3.3 6.5 mV VCM = VSS (Note 1) 2
At Temperature (I-Temp parts) Input Bias Current IB 25 100 pA TA = +85°C, VCM = VSS (Note 3) 2
Open-Drain Output Pull-Up Voltage VPU 1.6 10 V (Note 4) 3
High-Level Output Current IOH -100 nA VDD = 1.6V to 5.5V, VPU = 10V (Note 4) 3
Specified Temperature Range TA -40 85 °C 5
Operating Temperature Range TA -40 125 °C Note 5
Storage Temperature Range TA -65 150 °C 5
VDD - VSS VDD - VSS 7 V 2
Input current at input pins -2 2 mA 2
Current at output and supply pins -30 30 mA 2
Maximum Junction Temperature TJ 150 °C 2
ESD Protection on All Pins (HBM) 4 kV HBM; all parts other than MCP6546U 2
Drift with Temperature ΔVOS/ΔTA 3 µV/°C TA = -40°C to +125°C, VCM = VSS 2
Linear Temp. Co. TC1 6.7 µV/°C TA = -40°C to +125°C, VCM = VSS (Note 2) 2
Quadratic Temp. Co. TC2 -0.035 µV/°C2 TA = -40°C to +125°C, VCM = VSS (Note 2) 2
Input Bias Current IB 1 pA VCM = VSS 2
Input Offset Current IOS 1 pA VCM = VSS 2
Short-Circuit Current ISC 1.5 mA VPU = VDD = 1.6V (Note 4) 3
Short-Circuit Current ISC 30 mA VPU = VDD = 5.5V (Note 4) 3
Output Pin Capacitance COUT 8 pF 3
Fall Time tF 0.7 µs (Note 1) 3
Propagation Delay (High-to-Low) tPHL 4 8 µs 3
Propagation Delay (Low-to-High) tPLH 3 8 µs (Note 1) 3
Propagation Delay Skew tPDS -1 µs (Notes 1 and 2) 3
Maximum Toggle Frequency fMAX 225 kHz VDD = 1.6V 3
Maximum Toggle Frequency fMAX 165 kHz VDD = 5.5V 3
Input Noise Voltage Eni 200 µVP-P 10 Hz to 100 kHz 3
Thermal Resistance, 8L-SOIC θJA 149.5 °C/W 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin P = Plastic DIP (300 mil Body), 8-lead, 14-lead SN = Plastic SOIC (150 mil Body), 8-lead 41

CAD (KiCad official)

  • Symbol: MCP6547-I
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: mcp6547-i-etched.step / mcp6547-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6547-i.step / mcp6547-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (44 pp, sha256 529fbd52c82b3fe8, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF