Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS3847108DBVT

Texas Instruments · Monitors & Reset Circuits · SOT-23-5

TPS3847108DBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 RESET output Active-low push-pull reset output that stays low while VCC is below the factory-trimmed negative-going threshold and goes high after the reset delay time (td, 4.5 ms to 20 ms) once VCC rises above the positive-going threshold.
2 GND power_in Ground reference pin.
3 NC unconnected No internal connection.
4 MR input Manual reset input: a logic low forces RESET low regardless of VCC, and after MR returns high RESET goes high after td if VCC is above the positive-going threshold; MR must not be left floating and should be tied to VCC if unused, with VIL at most 0.4 V and VIH at least 1.2 V.
5 VCC power_in Power supply and monitored voltage, operating from 4.5 V to 18 V, with a 0.1-µF bypass capacitor recommended near the pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input supply voltage range V(VCC) 4.5 18 V 5
Power supply voltage (recommended) V(VCC) 4.5 18 V 4
VCC absolute maximum voltage VCC -0.3 20 V 4
MR pin voltage (absolute maximum) MR -0.3 V 4
RESET pin voltage (absolute maximum) -0.3 5.5 V 4
RESET current (absolute maximum) 10 mA 4
Operating junction temperature (absolute maximum) TJ -40 105 °C 4
Storage temperature Tstg -65 150 °C 4
MR pin voltage (recommended) V(MR) 0 1.2 V 4
RESET pin voltage (recommended) V(RESET) 0 5 V 4
RESET pin current (recommended) I(RESET) 0 2 mA 4
Input capacitor CIN 0 0.1 µF 4
Junction temperature (recommended) TJ -40 25 85 °C 4
Negative going input threshold accuracy -0.5 0.5 % TJ = 25°C 5
Negative going input threshold accuracy -2.5 2.5 % 5
Negative-going threshold voltage (TPS3847108) VIT- 10.53 10.8 11.07 V 5
Minimum V(VCC) voltage for valid output VVO 0.8 V IOL = 1 µA, VOL = 400 mV 5
Supply current (into VCC pin), TJ = 25°C I(VCC) 750 nA TJ = 25°C; output not connected 5
Supply current (into VCC pin), -40°C to +85°C I(VCC) 900 nA -40°C ≤ TJ ≤ +85°C; output not connected 5
Push-pull low-level output voltage (RESET) VOL 0.009 0.4 V 0.9 V < V(VCC) < 2.4 V, IOL= 10 μA 5
Push-pull low-level output voltage (RESET) VOL 0.015 0.4 V 2.4 V ≤ V(VCC) < 4.5 V, IOL= 250 μA 5
Push-pull low-level output voltage (RESET) VOL 0.09 0.4 V 4.5 V ≤ V(VCC) ≤ 18 V, IOL= 2 mA 5
Push-pull high-level output voltage (RESET) VOH 1.6 3.1 V IOH = -2 mA 5
Push-pull high-level output voltage (RESET) VOH 2.45 V IOH = -2 mA, V(VCC) = 18 V 5
Push-pull high-level output voltage (RESET) VOH 3 4 V IOH = -10 µA 5
Push-pull high-level output voltage (RESET) VOH 3.55 V IOH = -10 µA, V(VCC) = 18 V 5
Low-level input voltage (MR) VIL 0.4 V 5
High-level input voltage (MR) VIH 1.2 V 5
RESET delay time td 4.5 20 ms Measured with 5% overdrive 6
Startup delay time td(START) 6.5 40 ms Measured with 5% overdrive 6
Propagation delay for VCC falling tpd(VCC) 55 µs Measured with 8% overdrive 6
Propagation delay MR falling tpd(MR) 50 µs Measured with 8% overdrive 6
MR minimum high to low pulse duration for RESET low tP(MR) 50 µs 6
Supply current (into VCC pin), TJ = 25°C, V(VCC) = 18 V I(VCC) 380 nA TJ = 25°C, V(VCC) = 18 V; output not connected 5
MR leakage current Ilkg(MR) -23 nA MR High, V(VCC) = 18 V 5
Junction-to-ambient thermal resistance RθJA 208.5 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 123.3 °C/W 4
Junction-to-board thermal resistance RθJB 37.2 °C/W 4
Junction-to-top characterization parameter ψJT 14.6 °C/W 4
Junction-to-board characterization parameter ψJB 36.3 °C/W 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS3847108DBVT
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps3847108dbvt-etched.step / tps3847108dbvt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps3847108dbvt.step / tps3847108dbvt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (24 pp, sha256 c5f5632628e75821, retrieved 2026-11-12, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF