Generated by kicad-footprint-generator · KiCad file format 20260206
TPS3847108DBVT
Texas Instruments · Monitors & Reset Circuits · SOT-23-5
TPS3847108DBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active-low push-pull reset output that stays low while VCC is below the factory-trimmed negative-going threshold and goes high after the reset delay time (td, 4.5 ms to 20 ms) once VCC rises above the positive-going threshold. |
| 2 | GND | power_in | Ground reference pin. |
| 3 | NC | unconnected | No internal connection. |
| 4 | MR | input | Manual reset input: a logic low forces RESET low regardless of VCC, and after MR returns high RESET goes high after td if VCC is above the positive-going threshold; MR must not be left floating and should be tied to VCC if unused, with VIL at most 0.4 V and VIH at least 1.2 V. |
| 5 | VCC | power_in | Power supply and monitored voltage, operating from 4.5 V to 18 V, with a 0.1-µF bypass capacitor recommended near the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage range | V(VCC) | 4.5 | 18 | V | 5 | ||
| Power supply voltage (recommended) | V(VCC) | 4.5 | 18 | V | 4 | ||
| VCC absolute maximum voltage | VCC | -0.3 | 20 | V | 4 | ||
| MR pin voltage (absolute maximum) | MR | -0.3 | V | 4 | |||
| RESET pin voltage (absolute maximum) | -0.3 | 5.5 | V | 4 | |||
| RESET current (absolute maximum) | 10 | mA | 4 | ||||
| Operating junction temperature (absolute maximum) | TJ | -40 | 105 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| MR pin voltage (recommended) | V(MR) | 0 | 1.2 | V | 4 | ||
| RESET pin voltage (recommended) | V(RESET) | 0 | 5 | V | 4 | ||
| RESET pin current (recommended) | I(RESET) | 0 | 2 | mA | 4 | ||
| Input capacitor | CIN | 0 | 0.1 | µF | 4 | ||
| Junction temperature (recommended) | TJ | -40 | 25 | 85 | °C | 4 | |
| Negative going input threshold accuracy | -0.5 | 0.5 | % | TJ = 25°C | 5 | ||
| Negative going input threshold accuracy | -2.5 | 2.5 | % | 5 | |||
| Negative-going threshold voltage (TPS3847108) | VIT- | 10.53 | 10.8 | 11.07 | V | 5 | |
| Minimum V(VCC) voltage for valid output | VVO | 0.8 | V | IOL = 1 µA, VOL = 400 mV | 5 | ||
| Supply current (into VCC pin), TJ = 25°C | I(VCC) | 750 | nA | TJ = 25°C; output not connected | 5 | ||
| Supply current (into VCC pin), -40°C to +85°C | I(VCC) | 900 | nA | -40°C ≤ TJ ≤ +85°C; output not connected | 5 | ||
| Push-pull low-level output voltage (RESET) | VOL | 0.009 | 0.4 | V | 0.9 V < V(VCC) < 2.4 V, IOL= 10 μA | 5 | |
| Push-pull low-level output voltage (RESET) | VOL | 0.015 | 0.4 | V | 2.4 V ≤ V(VCC) < 4.5 V, IOL= 250 μA | 5 | |
| Push-pull low-level output voltage (RESET) | VOL | 0.09 | 0.4 | V | 4.5 V ≤ V(VCC) ≤ 18 V, IOL= 2 mA | 5 | |
| Push-pull high-level output voltage (RESET) | VOH | 1.6 | 3.1 | V | IOH = -2 mA | 5 | |
| Push-pull high-level output voltage (RESET) | VOH | 2.45 | V | IOH = -2 mA, V(VCC) = 18 V | 5 | ||
| Push-pull high-level output voltage (RESET) | VOH | 3 | 4 | V | IOH = -10 µA | 5 | |
| Push-pull high-level output voltage (RESET) | VOH | 3.55 | V | IOH = -10 µA, V(VCC) = 18 V | 5 | ||
| Low-level input voltage (MR) | VIL | 0.4 | V | 5 | |||
| High-level input voltage (MR) | VIH | 1.2 | V | 5 | |||
| RESET delay time | td | 4.5 | 20 | ms | Measured with 5% overdrive | 6 | |
| Startup delay time | td(START) | 6.5 | 40 | ms | Measured with 5% overdrive | 6 | |
| Propagation delay for VCC falling | tpd(VCC) | 55 | µs | Measured with 8% overdrive | 6 | ||
| Propagation delay MR falling | tpd(MR) | 50 | µs | Measured with 8% overdrive | 6 | ||
| MR minimum high to low pulse duration for RESET low | tP(MR) | 50 | µs | 6 | |||
| Supply current (into VCC pin), TJ = 25°C, V(VCC) = 18 V | I(VCC) | 380 | nA | TJ = 25°C, V(VCC) = 18 V; output not connected | 5 | ||
| MR leakage current | Ilkg(MR) | -23 | nA | MR High, V(VCC) = 18 V | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 208.5 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 123.3 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 37.2 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 14.6 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 36.3 | °C/W | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TPS3847108DBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps3847108dbvt-etched.step/tps3847108dbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps3847108dbvt.step/tps3847108dbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
c5f5632628e75821, retrieved 2026-11-12, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).