Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

N84C161WD42TG

onsemi · Current-Sensing Amplifiers · SOIC-8

N84C161WD42TG from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DC unconnected Do Not Connect pin that must be left unconnected.
2 /RESET bidirectional Active-low open-drain reset I/O that can also act as a manual reset trigger input and must be connected through a pull-up resistor.
3 WP input Write protect input that makes the entire memory array read-only when tied to VCC and allows normal read/write when tied to GND or left floating.
4 GND power_in Ground.
5 SDA bidirectional Serial data/address pin that is open drain, can be wire-ORed, and is monitored by the 1.6 second watchdog timer on the N84C161.
6 SCL input Serial clock input.
7 RESET bidirectional Active-high open-drain reset I/O that can also act as a manual reset trigger input and must be connected through a pulldown resistor.
8 VCC power_in Power supply pin for 2.7 V to 6 V operation.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8
Category Amplifiers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reset Threshold VTH 4.25 4.5 V VCC = 5 V, N84C161/2-42 4
Read Power Supply Current ICC:R 0.5 mA fSCL = 400 kHz 3
Write Power Supply Current ICC:W 1 mA Write Cycle 3
Standby Current ISB 40 µA VCC = 3.3 V 3
Standby Current ISB 50 µA VCC = 5 V 3
Input Leakage Current ILI 2 µA VIN = GND or VCC 3
Output Leakage Current ILO 10 µA VIN = GND or VCC 3
Input Low Voltage VIL -1 V 3
Output Low Voltage (SDA) VOL1 0.4 V IOL = 3 mA, VCC = 3.0 V 3
Input/Output Capacitance (SDA) CI/O 8 pF VI/O = 0 V 3
Input Capacitance (SCL) CIN 6 pF VIN = 0 V 3
Write Cycle Time tWR 10 ms 4
VCC Glitch Reject Pulse Width tGLITCH 100 ns 4
Reset Threshold Hysteresis VRT 15 mV 4
Reset Output Low Voltage VOLRS 0.4 V IOLRS = 1 mA 4
Power-Up Reset Timeout tPURST 130 270 ms 4
Watchdog Period tWP 1.6 s 4
VTH to RESET Output Delay tRPD 5 µs 4
RESET Output Valid VRVALID 1 V 4
Temperature Under Bias -55 125 °C 3
Storage Temperature -65 150 °C 3
VCC with Respect to Ground VCC -2 7 V 3
Voltage on any Pin with Respect to Ground -2 V 3
Package Power Dissipation Capability 1 W TA = 25°C 3
Lead Soldering Temperature 300 °C 10 sec 3
Output Short Circuit Current 100 mA Output shorted for no more than one second 3
Supply Voltage Range VCC 2.7 6 V VCC = 2.7 V to 6 V, unless otherwise specified 3

CAD (KiCad official)

  • Symbol: N84C161WD42TG
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: n84c161wd42tg-etched.step / n84c161wd42tg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); n84c161wd42tg.step / n84c161wd42tg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (12 pp, sha256 0911324a758d6d36, retrieved 2026-11-07, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF