3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownN84C161WD42TG
onsemi · Current-Sensing Amplifiers · SOIC-8
N84C161WD42TG from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DC | unconnected | Do Not Connect pin that must be left unconnected. |
| 2 | /RESET | bidirectional | Active-low open-drain reset I/O that can also act as a manual reset trigger input and must be connected through a pull-up resistor. |
| 3 | WP | input | Write protect input that makes the entire memory array read-only when tied to VCC and allows normal read/write when tied to GND or left floating. |
| 4 | GND | power_in | Ground. |
| 5 | SDA | bidirectional | Serial data/address pin that is open drain, can be wire-ORed, and is monitored by the 1.6 second watchdog timer on the N84C161. |
| 6 | SCL | input | Serial clock input. |
| 7 | RESET | bidirectional | Active-high open-drain reset I/O that can also act as a manual reset trigger input and must be connected through a pulldown resistor. |
| 8 | VCC | power_in | Power supply pin for 2.7 V to 6 V operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reset Threshold | VTH | 4.25 | 4.5 | V | VCC = 5 V, N84C161/2-42 | 4 | |
| Read Power Supply Current | ICC:R | 0.5 | mA | fSCL = 400 kHz | 3 | ||
| Write Power Supply Current | ICC:W | 1 | mA | Write Cycle | 3 | ||
| Standby Current | ISB | 40 | µA | VCC = 3.3 V | 3 | ||
| Standby Current | ISB | 50 | µA | VCC = 5 V | 3 | ||
| Input Leakage Current | ILI | 2 | µA | VIN = GND or VCC | 3 | ||
| Output Leakage Current | ILO | 10 | µA | VIN = GND or VCC | 3 | ||
| Input Low Voltage | VIL | -1 | V | 3 | |||
| Output Low Voltage (SDA) | VOL1 | 0.4 | V | IOL = 3 mA, VCC = 3.0 V | 3 | ||
| Input/Output Capacitance (SDA) | CI/O | 8 | pF | VI/O = 0 V | 3 | ||
| Input Capacitance (SCL) | CIN | 6 | pF | VIN = 0 V | 3 | ||
| Write Cycle Time | tWR | 10 | ms | 4 | |||
| VCC Glitch Reject Pulse Width | tGLITCH | 100 | ns | 4 | |||
| Reset Threshold Hysteresis | VRT | 15 | mV | 4 | |||
| Reset Output Low Voltage | VOLRS | 0.4 | V | IOLRS = 1 mA | 4 | ||
| Power-Up Reset Timeout | tPURST | 130 | 270 | ms | 4 | ||
| Watchdog Period | tWP | 1.6 | s | 4 | |||
| VTH to RESET Output Delay | tRPD | 5 | µs | 4 | |||
| RESET Output Valid | VRVALID | 1 | V | 4 | |||
| Temperature Under Bias | -55 | 125 | °C | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| VCC with Respect to Ground | VCC | -2 | 7 | V | 3 | ||
| Voltage on any Pin with Respect to Ground | -2 | V | 3 | ||||
| Package Power Dissipation Capability | 1 | W | TA = 25°C | 3 | |||
| Lead Soldering Temperature | 300 | °C | 10 sec | 3 | |||
| Output Short Circuit Current | 100 | mA | Output shorted for no more than one second | 3 | |||
| Supply Voltage Range | VCC | 2.7 | 6 | V | VCC = 2.7 V to 6 V, unless otherwise specified | 3 |
CAD (KiCad official)
- Symbol:
N84C161WD42TG - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
n84c161wd42tg-etched.step/n84c161wd42tg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);n84c161wd42tg.step/n84c161wd42tg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (12 pp, sha256
0911324a758d6d36, retrieved 2026-11-07, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).