Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV2463ID

Texas Instruments · Operational Amplifier · SOIC-14

TLV2463ID from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Output of amplifier 1, which swings rail-to-rail and can source or sink up to ±80 mA (±40 mA measured 1 V from the rail at 3 V, per the electrical tables).
2 1IN− input Inverting input of amplifier 1; input bias current is specified at up to 75 nA over the I-suffix temperature range.
3 1IN+ input Non-inverting input of amplifier 1; the common-mode input voltage range is 0 V to VDD.
4 GND power_in Ground (negative supply) reference; all voltages in the datasheet are referenced to this terminal.
5 NC unconnected No internal connection.
6 1SHDN input Shutdown terminal for amplifier 1; pulling it below 0.7 V (relative to GND) disables the amplifier and places its output in high impedance, while a logic high of at least 2 V or a floating pin enables it.
7 NC unconnected No internal connection.
8 NC unconnected No internal connection.
9 2SHDN input Shutdown terminal for amplifier 2; pulling it below 0.7 V (relative to GND) disables the amplifier and places its output in high impedance, while a logic high of at least 2 V or a floating pin enables it.
10 NC unconnected No internal connection.
11 2IN+ input Non-inverting input of amplifier 2; the common-mode input voltage range is 0 V to VDD.
12 2IN− input Inverting input of amplifier 2; input bias current is specified at up to 75 nA over the I-suffix temperature range.
13 2OUT output Output of amplifier 2, which swings rail-to-rail and can source or sink up to ±80 mA (±40 mA measured 1 V from the rail at 3 V, per the electrical tables).
14 VDD+ power_in Positive supply; recommended 2.7 V to 6 V single supply (or ±1.35 V to ±3 V split supply).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-14
Category Amplifiers/Comparators
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage, 25°C VIO 500 2000 µV VDD = 3 V, VIC = 1.5 V, VO = 1.5 V, TA = 25°C 7
Input offset voltage, full range VIO 2200 µV VDD = 3 V, VIC = 1.5 V, VO = 1.5 V, TA = −40°C to 125°C 7
Input bias current, 25°C IIB 4.4 14 nA VDD = 3 V, VIC = 1.5 V, VO = 1.5 V, RS = 50 Ω, TA = 25°C 7
Input bias current, full range IIB 75 nA VDD = 3 V, VIC = 1.5 V, VO = 1.5 V, RS = 50 Ω, TA = −40°C to 125°C 7
High-level output voltage, 25°C VOH 2.9 V VDD = 3 V, IOH = −2.5 mA, TA = 25°C 7
High-level output voltage, full range VOH 2.8 V VDD = 3 V, IOH = −2.5 mA, TA = −40°C to 125°C 7
High-level output voltage, 25°C VOH 2.7 V VDD = 3 V, IOH = −10 mA, TA = 25°C 7
High-level output voltage, full range VOH 2.5 V VDD = 3 V, IOH = −10 mA, TA = −40°C to 125°C 7
Low-level output voltage, 25°C VOL 0.1 V VDD = 3 V, VIC = 1.5 V, IOL = 2.5 mA, TA = 25°C 7
Low-level output voltage, full range VOL 0.2 V VDD = 3 V, VIC = 1.5 V, IOL = 2.5 mA, TA = −40°C to 125°C 7
Low-level output voltage, 25°C VOL 0.3 V VDD = 3 V, VIC = 1.5 V, IOL = 10 mA, TA = 25°C 7
Low-level output voltage, full range VOL 0.5 V VDD = 3 V, VIC = 1.5 V, IOL = 10 mA, TA = −40°C to 125°C 7
Large-signal differential voltage amplification, 25°C AVD 90 105 dB RL = 10 kΩ, VO(PP) = 1 V, TA = 25°C 7
Large-signal differential voltage amplification, full range AVD 89 dB RL = 10 kΩ, VO(PP) = 1 V, TA = −40°C to 125°C 7
Common-mode rejection ratio, 25°C CMRR 66 80 dB VICR = 0 to 3 V, RS = 50 Ω, TA = 25°C 8
Common-mode rejection ratio, full range CMRR 60 dB VICR = 0 to 3 V, RS = 50 Ω, TA = −40°C to 125°C 8
Supply current per channel, 25°C IDD 0.5 0.575 mA VDD = 3 V, VO = 1.5 V, No load, TA = 25°C 8
Supply current per channel, full range IDD 0.9 mA VDD = 3 V, VO = 1.5 V, No load, TA = −40°C to 125°C 8
Slew rate at unity gain, 25°C SR 0.9 1.6 V/µs VDD = 3 V, VO(PP) = 0.8 V, CL = 160 pF, RL = 10 kΩ, TA = 25°C 8
Slew rate at unity gain, full range SR 0.8 V/µs VDD = 3 V, VO(PP) = 0.8 V, CL = 160 pF, RL = 10 kΩ, TA = −40°C to 125°C 8
Input offset voltage, 25°C VIO 500 2000 µV VDD = 5 V, VIC = 2.5 V, VO = 2.5 V, TA = 25°C 9
Input offset voltage, full range VIO 2200 µV VDD = 5 V, VIC = 2.5 V, VO = 2.5 V, TA = −40°C to 125°C 9
Input bias current, 25°C IIB 1.3 14 nA VDD = 5 V, VIC = 2.5 V, VO = 2.5 V, RS = 50 Ω, TA = 25°C 9
Input bias current, full range IIB 60 nA VDD = 5 V, VIC = 2.5 V, VO = 2.5 V, RS = 50 Ω, TA = −40°C to 125°C 9
High-level output voltage, 25°C VOH 4.9 V VDD = 5 V, IOH = −2.5 mA, TA = 25°C 9
High-level output voltage, full range VOH 4.8 V VDD = 5 V, IOH = −2.5 mA, TA = −40°C to 125°C 9
High-level output voltage, 25°C VOH 4.8 V VDD = 5 V, IOH = −10 mA, TA = 25°C 9
High-level output voltage, full range VOH 4.7 V VDD = 5 V, IOH = −10 mA, TA = −40°C to 125°C 9
Low-level output voltage, 25°C VOL 0.1 V VDD = 5 V, VIC = 2.5 V, IOL = 2.5 mA, TA = 25°C 9
Low-level output voltage, full range VOL 0.2 V VDD = 5 V, VIC = 2.5 V, IOL = 2.5 mA, TA = −40°C to 125°C 9
Low-level output voltage, 25°C VOL 0.2 V VDD = 5 V, VIC = 2.5 V, IOL = 10 mA, TA = 25°C 9
Low-level output voltage, full range VOL 0.3 V VDD = 5 V, VIC = 2.5 V, IOL = 10 mA, TA = −40°C to 125°C 9
Large-signal differential voltage amplification, 25°C AVD 92 109 dB VDD = 5 V, VIC = 2.5 V, RL = 10 kΩ, TA = 25°C 9
Large-signal differential voltage amplification, full range AVD 90 dB VDD = 5 V, VIC = 2.5 V, VO = 1 V to 4 V, RL = 10 kΩ, TA = −40°C to 125°C 9
Common-mode rejection ratio, 25°C CMRR 71 85 dB VICR = 0 V to 5 V, RS = 50 Ω, TA = 25°C 9
Common-mode rejection ratio, full range CMRR 60 dB VICR = 0 V to 5 V, RS = 50 Ω, TA = −40°C to 125°C 9
Supply current per channel, 25°C IDD 0.55 0.65 mA VDD = 5 V, VO = 2.5 V, No load, TA = 25°C 9
Supply current per channel, full range IDD 1 mA VDD = 5 V, VO = 2.5 V, No load, TA = −40°C to 125°C 9
Slew rate at unity gain, 25°C SR 0.9 1.6 V/µs VDD = 5 V, VO(PP) = 2 V, CL = 160 pF, RL = 10 kΩ, TA = 25°C 10
Slew rate at unity gain, full range SR 0.8 V/µs VDD = 5 V, VO(PP) = 2 V, CL = 160 pF, RL = 10 kΩ, TA = −40°C to 125°C 10
Single supply voltage VDD 2.7 6 V Single supply 7
Split supply voltage VDD 1.35 3 V Split supply (±VDD) 7
Common-mode input voltage range VICR 0 V 7
Operating free-air temperature, I suffix TA -40 125 °C I suffix 7
Shutdown on/off voltage level, high VIH 2 V Relative to GND terminal 7
Shutdown on/off voltage level, low VIL 0.7 V Relative to GND terminal 7
Supply voltage VDD 6 V All voltages referenced to GND (note 1) 6
Differential input voltage VID -0.2 V Upper limit VDD + 0.2 V 6
Input current (any input) II -200 200 mA Any input 6
Output current IO -175 175 mA 6
Total input current (into VDD+) II 175 mA Into VDD+ 6
Total output current (out of GND) IO 175 mA Out of GND 6
Operating free-air temperature range, I suffix TA -40 125 °C I suffix 6
Maximum junction temperature TJ 150 °C 6
Storage temperature range Tstg -65 150 °C 6
Lead temperature 260 °C 1.6 mm (1/16 inch) from case for 10 seconds 6
Junction-to-ambient thermal resistance, D (14) θJA 122.6 °C/W D (14) package, C and I suffix, not production tested 6
Junction-to-case thermal resistance, D (14) θJC 26.9 °C/W D (14) package, C and I suffix, not production tested 6
Power rating, D (14) 1022 mW TA ≤ 25°C, D (14) package, C and I suffix 6
Power rating, D (14) 204.4 mW TA < 125°C, D (14) package, C and I suffix 6

CAD (KiCad official)

  • Symbol: TLV2463ID
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: tlv2463id-etched.step / tlv2463id-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv2463id.step / tlv2463id.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (84 pp, sha256 c6d8801e35b301ec, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF