3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV2463ID
Texas Instruments · Operational Amplifier · SOIC-14
TLV2463ID from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier 1, which swings rail-to-rail and can source or sink up to ±80 mA (±40 mA measured 1 V from the rail at 3 V, per the electrical tables). |
| 2 | 1IN− | input | Inverting input of amplifier 1; input bias current is specified at up to 75 nA over the I-suffix temperature range. |
| 3 | 1IN+ | input | Non-inverting input of amplifier 1; the common-mode input voltage range is 0 V to VDD. |
| 4 | GND | power_in | Ground (negative supply) reference; all voltages in the datasheet are referenced to this terminal. |
| 5 | NC | unconnected | No internal connection. |
| 6 | 1SHDN | input | Shutdown terminal for amplifier 1; pulling it below 0.7 V (relative to GND) disables the amplifier and places its output in high impedance, while a logic high of at least 2 V or a floating pin enables it. |
| 7 | NC | unconnected | No internal connection. |
| 8 | NC | unconnected | No internal connection. |
| 9 | 2SHDN | input | Shutdown terminal for amplifier 2; pulling it below 0.7 V (relative to GND) disables the amplifier and places its output in high impedance, while a logic high of at least 2 V or a floating pin enables it. |
| 10 | NC | unconnected | No internal connection. |
| 11 | 2IN+ | input | Non-inverting input of amplifier 2; the common-mode input voltage range is 0 V to VDD. |
| 12 | 2IN− | input | Inverting input of amplifier 2; input bias current is specified at up to 75 nA over the I-suffix temperature range. |
| 13 | 2OUT | output | Output of amplifier 2, which swings rail-to-rail and can source or sink up to ±80 mA (±40 mA measured 1 V from the rail at 3 V, per the electrical tables). |
| 14 | VDD+ | power_in | Positive supply; recommended 2.7 V to 6 V single supply (or ±1.35 V to ±3 V split supply). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage, 25°C | VIO | 500 | 2000 | µV | VDD = 3 V, VIC = 1.5 V, VO = 1.5 V, TA = 25°C | 7 | |
| Input offset voltage, full range | VIO | 2200 | µV | VDD = 3 V, VIC = 1.5 V, VO = 1.5 V, TA = −40°C to 125°C | 7 | ||
| Input bias current, 25°C | IIB | 4.4 | 14 | nA | VDD = 3 V, VIC = 1.5 V, VO = 1.5 V, RS = 50 Ω, TA = 25°C | 7 | |
| Input bias current, full range | IIB | 75 | nA | VDD = 3 V, VIC = 1.5 V, VO = 1.5 V, RS = 50 Ω, TA = −40°C to 125°C | 7 | ||
| High-level output voltage, 25°C | VOH | 2.9 | V | VDD = 3 V, IOH = −2.5 mA, TA = 25°C | 7 | ||
| High-level output voltage, full range | VOH | 2.8 | V | VDD = 3 V, IOH = −2.5 mA, TA = −40°C to 125°C | 7 | ||
| High-level output voltage, 25°C | VOH | 2.7 | V | VDD = 3 V, IOH = −10 mA, TA = 25°C | 7 | ||
| High-level output voltage, full range | VOH | 2.5 | V | VDD = 3 V, IOH = −10 mA, TA = −40°C to 125°C | 7 | ||
| Low-level output voltage, 25°C | VOL | 0.1 | V | VDD = 3 V, VIC = 1.5 V, IOL = 2.5 mA, TA = 25°C | 7 | ||
| Low-level output voltage, full range | VOL | 0.2 | V | VDD = 3 V, VIC = 1.5 V, IOL = 2.5 mA, TA = −40°C to 125°C | 7 | ||
| Low-level output voltage, 25°C | VOL | 0.3 | V | VDD = 3 V, VIC = 1.5 V, IOL = 10 mA, TA = 25°C | 7 | ||
| Low-level output voltage, full range | VOL | 0.5 | V | VDD = 3 V, VIC = 1.5 V, IOL = 10 mA, TA = −40°C to 125°C | 7 | ||
| Large-signal differential voltage amplification, 25°C | AVD | 90 | 105 | dB | RL = 10 kΩ, VO(PP) = 1 V, TA = 25°C | 7 | |
| Large-signal differential voltage amplification, full range | AVD | 89 | dB | RL = 10 kΩ, VO(PP) = 1 V, TA = −40°C to 125°C | 7 | ||
| Common-mode rejection ratio, 25°C | CMRR | 66 | 80 | dB | VICR = 0 to 3 V, RS = 50 Ω, TA = 25°C | 8 | |
| Common-mode rejection ratio, full range | CMRR | 60 | dB | VICR = 0 to 3 V, RS = 50 Ω, TA = −40°C to 125°C | 8 | ||
| Supply current per channel, 25°C | IDD | 0.5 | 0.575 | mA | VDD = 3 V, VO = 1.5 V, No load, TA = 25°C | 8 | |
| Supply current per channel, full range | IDD | 0.9 | mA | VDD = 3 V, VO = 1.5 V, No load, TA = −40°C to 125°C | 8 | ||
| Slew rate at unity gain, 25°C | SR | 0.9 | 1.6 | V/µs | VDD = 3 V, VO(PP) = 0.8 V, CL = 160 pF, RL = 10 kΩ, TA = 25°C | 8 | |
| Slew rate at unity gain, full range | SR | 0.8 | V/µs | VDD = 3 V, VO(PP) = 0.8 V, CL = 160 pF, RL = 10 kΩ, TA = −40°C to 125°C | 8 | ||
| Input offset voltage, 25°C | VIO | 500 | 2000 | µV | VDD = 5 V, VIC = 2.5 V, VO = 2.5 V, TA = 25°C | 9 | |
| Input offset voltage, full range | VIO | 2200 | µV | VDD = 5 V, VIC = 2.5 V, VO = 2.5 V, TA = −40°C to 125°C | 9 | ||
| Input bias current, 25°C | IIB | 1.3 | 14 | nA | VDD = 5 V, VIC = 2.5 V, VO = 2.5 V, RS = 50 Ω, TA = 25°C | 9 | |
| Input bias current, full range | IIB | 60 | nA | VDD = 5 V, VIC = 2.5 V, VO = 2.5 V, RS = 50 Ω, TA = −40°C to 125°C | 9 | ||
| High-level output voltage, 25°C | VOH | 4.9 | V | VDD = 5 V, IOH = −2.5 mA, TA = 25°C | 9 | ||
| High-level output voltage, full range | VOH | 4.8 | V | VDD = 5 V, IOH = −2.5 mA, TA = −40°C to 125°C | 9 | ||
| High-level output voltage, 25°C | VOH | 4.8 | V | VDD = 5 V, IOH = −10 mA, TA = 25°C | 9 | ||
| High-level output voltage, full range | VOH | 4.7 | V | VDD = 5 V, IOH = −10 mA, TA = −40°C to 125°C | 9 | ||
| Low-level output voltage, 25°C | VOL | 0.1 | V | VDD = 5 V, VIC = 2.5 V, IOL = 2.5 mA, TA = 25°C | 9 | ||
| Low-level output voltage, full range | VOL | 0.2 | V | VDD = 5 V, VIC = 2.5 V, IOL = 2.5 mA, TA = −40°C to 125°C | 9 | ||
| Low-level output voltage, 25°C | VOL | 0.2 | V | VDD = 5 V, VIC = 2.5 V, IOL = 10 mA, TA = 25°C | 9 | ||
| Low-level output voltage, full range | VOL | 0.3 | V | VDD = 5 V, VIC = 2.5 V, IOL = 10 mA, TA = −40°C to 125°C | 9 | ||
| Large-signal differential voltage amplification, 25°C | AVD | 92 | 109 | dB | VDD = 5 V, VIC = 2.5 V, RL = 10 kΩ, TA = 25°C | 9 | |
| Large-signal differential voltage amplification, full range | AVD | 90 | dB | VDD = 5 V, VIC = 2.5 V, VO = 1 V to 4 V, RL = 10 kΩ, TA = −40°C to 125°C | 9 | ||
| Common-mode rejection ratio, 25°C | CMRR | 71 | 85 | dB | VICR = 0 V to 5 V, RS = 50 Ω, TA = 25°C | 9 | |
| Common-mode rejection ratio, full range | CMRR | 60 | dB | VICR = 0 V to 5 V, RS = 50 Ω, TA = −40°C to 125°C | 9 | ||
| Supply current per channel, 25°C | IDD | 0.55 | 0.65 | mA | VDD = 5 V, VO = 2.5 V, No load, TA = 25°C | 9 | |
| Supply current per channel, full range | IDD | 1 | mA | VDD = 5 V, VO = 2.5 V, No load, TA = −40°C to 125°C | 9 | ||
| Slew rate at unity gain, 25°C | SR | 0.9 | 1.6 | V/µs | VDD = 5 V, VO(PP) = 2 V, CL = 160 pF, RL = 10 kΩ, TA = 25°C | 10 | |
| Slew rate at unity gain, full range | SR | 0.8 | V/µs | VDD = 5 V, VO(PP) = 2 V, CL = 160 pF, RL = 10 kΩ, TA = −40°C to 125°C | 10 | ||
| Single supply voltage | VDD | 2.7 | 6 | V | Single supply | 7 | |
| Split supply voltage | VDD | 1.35 | 3 | V | Split supply (±VDD) | 7 | |
| Common-mode input voltage range | VICR | 0 | V | 7 | |||
| Operating free-air temperature, I suffix | TA | -40 | 125 | °C | I suffix | 7 | |
| Shutdown on/off voltage level, high | VIH | 2 | V | Relative to GND terminal | 7 | ||
| Shutdown on/off voltage level, low | VIL | 0.7 | V | Relative to GND terminal | 7 | ||
| Supply voltage | VDD | 6 | V | All voltages referenced to GND (note 1) | 6 | ||
| Differential input voltage | VID | -0.2 | V | Upper limit VDD + 0.2 V | 6 | ||
| Input current (any input) | II | -200 | 200 | mA | Any input | 6 | |
| Output current | IO | -175 | 175 | mA | 6 | ||
| Total input current (into VDD+) | II | 175 | mA | Into VDD+ | 6 | ||
| Total output current (out of GND) | IO | 175 | mA | Out of GND | 6 | ||
| Operating free-air temperature range, I suffix | TA | -40 | 125 | °C | I suffix | 6 | |
| Maximum junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 6 | ||
| Lead temperature | 260 | °C | 1.6 mm (1/16 inch) from case for 10 seconds | 6 | |||
| Junction-to-ambient thermal resistance, D (14) | θJA | 122.6 | °C/W | D (14) package, C and I suffix, not production tested | 6 | ||
| Junction-to-case thermal resistance, D (14) | θJC | 26.9 | °C/W | D (14) package, C and I suffix, not production tested | 6 | ||
| Power rating, D (14) | 1022 | mW | TA ≤ 25°C, D (14) package, C and I suffix | 6 | |||
| Power rating, D (14) | 204.4 | mW | TA < 125°C, D (14) package, C and I suffix | 6 |
CAD (KiCad official)
- Symbol:
TLV2463ID - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
tlv2463id-etched.step/tlv2463id-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv2463id.step/tlv2463id.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (84 pp, sha256
c6d8801e35b301ec, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).