Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV62080DSGT

Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)

TLV62080DSGT from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Device enable logic input; logic HIGH enables the device, logic LOW disables it into shutdown, and it must not be left floating.
2 GND power_in Power and signal ground.
3 GND power_in Power and signal ground.
4 FB input Feedback terminal for the internal control loop, connected to the external feedback divider to program the output voltage.
5 VOS input Output voltage sense terminal for the internal control loop; must be connected to the output.
6 PG output Power Good open-drain output pulled low if the output voltage is below regulation limits (sink typically up to 0.5 mA, absolute max 1 mA); can be left floating if not used.
7 SW power_out Switch terminal connected to the internal MOSFET switches and the inductor terminal; connect the inductor of the output filter here.
8 VIN power_in Power supply voltage input (2.5 V to 6 V for TLV62080, 2.7 V to 6 V for TLV62084/TLV62084A).
9 EP power_in Exposed thermal pad must be connected to GND and soldered to achieve appropriate power dissipation and mechanical reliability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-8-EP(2x2)
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range, TLV62080 VIN 2.5 6 V 6
High level input voltage EN VIH 1 V 2.5 V ≤ VIN ≤ 6 V 6
Low level input voltage EN VIL 0.4 V 2.5 V ≤ VIN ≤ 6 V 6
Input leakage current ILKG 0.01 0.5 µA 6
Power good threshold VPG -15 -10 -5 % VOUT falling referenced to VOUT nominal 6
Power good low level voltage VOL 0.3 V Isink = 500 µA 6
PG leakage current IPG,LKG 0.01 0.1 µA VPG = 5.0 V 6
Output voltage range VOUT 0.5 4 V 6
Feedback regulation voltage VFB 0.438 0.45 0.462 V VIN ≥ 2.5 V and VIN ≥ VOUT + 1 V 6
Feedback input bias current IFB 10 100 nA VFB = 0.45 V 6
High side FET switch current-limit, TLV62080 ILIM 1.6 2.8 4 A Rising inductor current 6
Input voltage range, TLV62080 VIN 2.5 6 V 5
Operating junction temperature TJ -40 125 °C 5
Voltage range VIN, PG, VOS -0.3 7 V 5
Voltage range SW -0.3 V Max printed as VIN + 0.3 V 5
Voltage range SW (AC, less than 10 ns) -3 10 V While switching 5
Voltage range FB -0.3 3.6 V 5
Voltage range EN -0.3 V Max printed as VIN + 0.3 V 5
Power Good sink current PG 1 mA 5
Operating junction temperature range TJ -40 150 °C 5
Storage temperature range Tstg -65 150 °C 5
ESD HBM V(ESD) -2000 2000 V Human body model 5
ESD CDM V(ESD) -500 500 V Charged device model 5
Junction-to-ambient thermal resistance θJA 59.7 °C/W DSG (8 pins) 5
Junction-to-case (top) thermal resistance θJCtop 70.1 °C/W DSG (8 pins) 5
Junction-to-board thermal resistance θJB 30.9 °C/W DSG (8 pins) 5
Junction-to-top characterization parameter ψJT 1.4 °C/W DSG (8 pins) 5
Junction-to-board characterization parameter ψJB 31.5 °C/W DSG (8 pins) 5
Junction-to-case (bottom) thermal resistance θJCbot 8.6 °C/W DSG (8 pins) 5

CAD (KiCad official)

  • Symbol: TLV62080DSGT
  • Footprint: Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm
  • 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tlv62080dsgt-etched.step / tlv62080dsgt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv62080dsgt.step / tlv62080dsgt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 f3b445bb6aafeced, retrieved 2026-10-27, tier: manufacturer) (maker link no longer resolves; copy stored with this page)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF