Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
TLV62080DSGT
Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)
TLV62080DSGT from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Device enable logic input; logic HIGH enables the device, logic LOW disables it into shutdown, and it must not be left floating. |
| 2 | GND | power_in | Power and signal ground. |
| 3 | GND | power_in | Power and signal ground. |
| 4 | FB | input | Feedback terminal for the internal control loop, connected to the external feedback divider to program the output voltage. |
| 5 | VOS | input | Output voltage sense terminal for the internal control loop; must be connected to the output. |
| 6 | PG | output | Power Good open-drain output pulled low if the output voltage is below regulation limits (sink typically up to 0.5 mA, absolute max 1 mA); can be left floating if not used. |
| 7 | SW | power_out | Switch terminal connected to the internal MOSFET switches and the inductor terminal; connect the inductor of the output filter here. |
| 8 | VIN | power_in | Power supply voltage input (2.5 V to 6 V for TLV62080, 2.7 V to 6 V for TLV62084/TLV62084A). |
| 9 | EP | power_in | Exposed thermal pad must be connected to GND and soldered to achieve appropriate power dissipation and mechanical reliability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range, TLV62080 | VIN | 2.5 | 6 | V | 6 | ||
| High level input voltage EN | VIH | 1 | V | 2.5 V ≤ VIN ≤ 6 V | 6 | ||
| Low level input voltage EN | VIL | 0.4 | V | 2.5 V ≤ VIN ≤ 6 V | 6 | ||
| Input leakage current | ILKG | 0.01 | 0.5 | µA | 6 | ||
| Power good threshold | VPG | -15 | -10 | -5 | % | VOUT falling referenced to VOUT nominal | 6 |
| Power good low level voltage | VOL | 0.3 | V | Isink = 500 µA | 6 | ||
| PG leakage current | IPG,LKG | 0.01 | 0.1 | µA | VPG = 5.0 V | 6 | |
| Output voltage range | VOUT | 0.5 | 4 | V | 6 | ||
| Feedback regulation voltage | VFB | 0.438 | 0.45 | 0.462 | V | VIN ≥ 2.5 V and VIN ≥ VOUT + 1 V | 6 |
| Feedback input bias current | IFB | 10 | 100 | nA | VFB = 0.45 V | 6 | |
| High side FET switch current-limit, TLV62080 | ILIM | 1.6 | 2.8 | 4 | A | Rising inductor current | 6 |
| Input voltage range, TLV62080 | VIN | 2.5 | 6 | V | 5 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Voltage range VIN, PG, VOS | -0.3 | 7 | V | 5 | |||
| Voltage range SW | -0.3 | V | Max printed as VIN + 0.3 V | 5 | |||
| Voltage range SW (AC, less than 10 ns) | -3 | 10 | V | While switching | 5 | ||
| Voltage range FB | -0.3 | 3.6 | V | 5 | |||
| Voltage range EN | -0.3 | V | Max printed as VIN + 0.3 V | 5 | |||
| Power Good sink current PG | 1 | mA | 5 | ||||
| Operating junction temperature range | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human body model | 5 | |
| ESD CDM | V(ESD) | -500 | 500 | V | Charged device model | 5 | |
| Junction-to-ambient thermal resistance | θJA | 59.7 | °C/W | DSG (8 pins) | 5 | ||
| Junction-to-case (top) thermal resistance | θJCtop | 70.1 | °C/W | DSG (8 pins) | 5 | ||
| Junction-to-board thermal resistance | θJB | 30.9 | °C/W | DSG (8 pins) | 5 | ||
| Junction-to-top characterization parameter | ψJT | 1.4 | °C/W | DSG (8 pins) | 5 | ||
| Junction-to-board characterization parameter | ψJB | 31.5 | °C/W | DSG (8 pins) | 5 | ||
| Junction-to-case (bottom) thermal resistance | θJCbot | 8.6 | °C/W | DSG (8 pins) | 5 |
CAD (KiCad official)
- Symbol:
TLV62080DSGT - Footprint:
Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm - 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tlv62080dsgt-etched.step/tlv62080dsgt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv62080dsgt.step/tlv62080dsgt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
f3b445bb6aafeced, retrieved 2026-10-27, tier: manufacturer) (maker link no longer resolves; copy stored with this page) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).