Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA325IDBVT

Texas Instruments · Operational Amplifier · SOT-23-5

OPA325IDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Output of the amplifier, which typically swings within 10 mV of the rails at RL = 10 kΩ, and whose short-circuit output current is continuous per the absolute maximum ratings.
2 V- power_in Negative (lowest) power supply; the recommended single-supply range is 2.2 V to 5.5 V and the absolute maximum supply voltage VS = (V+) - (V-) is 6 V.
3 +IN input Noninverting input whose common-mode voltage range is (V-) - 0.1 V to (V+) + 0.1 V, and whose signal inputs are diode-clamped to the rails with a 10 mA current limit.
4 -IN input Inverting input whose common-mode voltage range is (V-) - 0.1 V to (V+) + 0.1 V, and whose signal inputs are diode-clamped to the rails with a 10 mA current limit.
5 V+ power_in Positive (highest) power supply; the recommended single-supply range is 2.2 V to 5.5 V and the absolute maximum supply voltage VS = (V+) - (V-) is 6 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS = (V+), (V-) VS 6 V 5
Signal input pins current -10 10 mA 5
Operating temperature, free-air TA -40 150 °C 5
Junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Supply voltage, single supply VS 2.2 5.5 V Single supply 5
Supply voltage, dual supply VS 1.1 2.75 V Dual supply; printed as ±1.1 V to ±2.75 V 5
Specified temperature TA -40 125 °C Specified temperature 5
Input offset voltage VOS 40 150 µV 7
Input offset voltage drift dVOS/dT 2 7.5 µV/°C VS = 5.5 V, TA = -40°C to +125°C 7
Power-supply rejection ratio PSRR 6 20 µV/V VS = 2.2 V to +5.5 V 7
Power-supply rejection ratio over temperature PSRR 15 µV/V VS = 2.2 V to 5.5 V, TA = -40°C to +125°C 7
Common-mode rejection ratio CMRR 100 114 dB VS = 5.5 V, (V-), 0.1 V < VCM < (V+) + 0.1 V 7
Common-mode rejection ratio over temperature CMRR 95 dB TA = -40°C to +125°C 7
Input bias current IB -10 0.2 10 pA 7
Input bias current, TA -40°C to +85°C IB -500 500 pA TA = -40°C to +85°C 7
Input bias current, TA -40°C to +125°C IB -10 10 nA TA = -40°C to +125°C 7
Input offset current IOS -10 0.2 10 pA 7
Input offset current, TA -40°C to +85°C IOS -500 500 pA TA = -40°C to +85°C 7
Input offset current, TA -40°C to +125°C IOS -10 10 nA TA = -40°C to +125°C 7
Open-loop voltage gain AOL 105 130 dB 0.1 V < VO < (V+), 0.1 V, RL = 10 kΩ 7
Open-loop voltage gain over temperature AOL 95 128 dB 0.1 V < VO < (V+), 0.1 V, RL = 10 kΩ, TA = -40°C to +125°C 7
Open-loop voltage gain, RL = 2 kΩ AOL 100 110 dB 0.2 V < VO < (V+), 0.2 V, RL = 2 kΩ 7
Voltage output swing from both rails, RL = 10 kΩ VO 10 20 mV RL = 10 kΩ 8
Voltage output swing from both rails, RL = 10 kΩ over temperature VO 30 mV RL = 10 kΩ, TA = -40°C to +125°C 8
Voltage output swing from both rails, RL = 2 kΩ VO 25 45 mV RL = 2 kΩ 8
Voltage output swing from both rails, RL = 2 kΩ over temperature VO 55 mV RL = 2 kΩ, TA = -40°C to +125°C 8
Quiescent current per amplifier IQ 0.65 0.75 mA IO = 0 mA, VS = 5.5 V 8
Quiescent current per amplifier over temperature IQ 0.8 mA IO = 0 mA, VS = 5.5 V, TA = -40°C to +125°C 8
Junction-to-ambient thermal resistance, DBV (SOT) 5-pin RθJA 205 °C/W 6
Junction-to-case (top) thermal resistance, DBV (SOT) 5-pin RθJC(top) 200 °C/W 6
Junction-to-board thermal resistance, DBV (SOT) 5-pin RθJB 113 °C/W 6
Junction-to-top characterization parameter, DBV (SOT) 5-pin ΨJT 38.2 °C/W 6
Junction-to-board characterization parameter, DBV (SOT) 5-pin ΨJB 104.9 °C/W 6

CAD (KiCad official)

  • Symbol: OPA325IDBVT
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa325idbvt-etched.step / opa325idbvt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa325idbvt.step / opa325idbvt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (45 pp, sha256 a648d51a07ecc416, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF