Generated by kicad-footprint-generator · KiCad file format 20260206
OPA325IDBVT
Texas Instruments · Operational Amplifier · SOT-23-5
OPA325IDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output of the amplifier, which typically swings within 10 mV of the rails at RL = 10 kΩ, and whose short-circuit output current is continuous per the absolute maximum ratings. |
| 2 | V- | power_in | Negative (lowest) power supply; the recommended single-supply range is 2.2 V to 5.5 V and the absolute maximum supply voltage VS = (V+) - (V-) is 6 V. |
| 3 | +IN | input | Noninverting input whose common-mode voltage range is (V-) - 0.1 V to (V+) + 0.1 V, and whose signal inputs are diode-clamped to the rails with a 10 mA current limit. |
| 4 | -IN | input | Inverting input whose common-mode voltage range is (V-) - 0.1 V to (V+) + 0.1 V, and whose signal inputs are diode-clamped to the rails with a 10 mA current limit. |
| 5 | V+ | power_in | Positive (highest) power supply; the recommended single-supply range is 2.2 V to 5.5 V and the absolute maximum supply voltage VS = (V+) - (V-) is 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VS = (V+), (V-) | VS | 6 | V | 5 | |||
| Signal input pins current | -10 | 10 | mA | 5 | |||
| Operating temperature, free-air | TA | -40 | 150 | °C | 5 | ||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Supply voltage, single supply | VS | 2.2 | 5.5 | V | Single supply | 5 | |
| Supply voltage, dual supply | VS | 1.1 | 2.75 | V | Dual supply; printed as ±1.1 V to ±2.75 V | 5 | |
| Specified temperature | TA | -40 | 125 | °C | Specified temperature | 5 | |
| Input offset voltage | VOS | 40 | 150 | µV | 7 | ||
| Input offset voltage drift | dVOS/dT | 2 | 7.5 | µV/°C | VS = 5.5 V, TA = -40°C to +125°C | 7 | |
| Power-supply rejection ratio | PSRR | 6 | 20 | µV/V | VS = 2.2 V to +5.5 V | 7 | |
| Power-supply rejection ratio over temperature | PSRR | 15 | µV/V | VS = 2.2 V to 5.5 V, TA = -40°C to +125°C | 7 | ||
| Common-mode rejection ratio | CMRR | 100 | 114 | dB | VS = 5.5 V, (V-), 0.1 V < VCM < (V+) + 0.1 V | 7 | |
| Common-mode rejection ratio over temperature | CMRR | 95 | dB | TA = -40°C to +125°C | 7 | ||
| Input bias current | IB | -10 | 0.2 | 10 | pA | 7 | |
| Input bias current, TA -40°C to +85°C | IB | -500 | 500 | pA | TA = -40°C to +85°C | 7 | |
| Input bias current, TA -40°C to +125°C | IB | -10 | 10 | nA | TA = -40°C to +125°C | 7 | |
| Input offset current | IOS | -10 | 0.2 | 10 | pA | 7 | |
| Input offset current, TA -40°C to +85°C | IOS | -500 | 500 | pA | TA = -40°C to +85°C | 7 | |
| Input offset current, TA -40°C to +125°C | IOS | -10 | 10 | nA | TA = -40°C to +125°C | 7 | |
| Open-loop voltage gain | AOL | 105 | 130 | dB | 0.1 V < VO < (V+), 0.1 V, RL = 10 kΩ | 7 | |
| Open-loop voltage gain over temperature | AOL | 95 | 128 | dB | 0.1 V < VO < (V+), 0.1 V, RL = 10 kΩ, TA = -40°C to +125°C | 7 | |
| Open-loop voltage gain, RL = 2 kΩ | AOL | 100 | 110 | dB | 0.2 V < VO < (V+), 0.2 V, RL = 2 kΩ | 7 | |
| Voltage output swing from both rails, RL = 10 kΩ | VO | 10 | 20 | mV | RL = 10 kΩ | 8 | |
| Voltage output swing from both rails, RL = 10 kΩ over temperature | VO | 30 | mV | RL = 10 kΩ, TA = -40°C to +125°C | 8 | ||
| Voltage output swing from both rails, RL = 2 kΩ | VO | 25 | 45 | mV | RL = 2 kΩ | 8 | |
| Voltage output swing from both rails, RL = 2 kΩ over temperature | VO | 55 | mV | RL = 2 kΩ, TA = -40°C to +125°C | 8 | ||
| Quiescent current per amplifier | IQ | 0.65 | 0.75 | mA | IO = 0 mA, VS = 5.5 V | 8 | |
| Quiescent current per amplifier over temperature | IQ | 0.8 | mA | IO = 0 mA, VS = 5.5 V, TA = -40°C to +125°C | 8 | ||
| Junction-to-ambient thermal resistance, DBV (SOT) 5-pin | RθJA | 205 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance, DBV (SOT) 5-pin | RθJC(top) | 200 | °C/W | 6 | |||
| Junction-to-board thermal resistance, DBV (SOT) 5-pin | RθJB | 113 | °C/W | 6 | |||
| Junction-to-top characterization parameter, DBV (SOT) 5-pin | ΨJT | 38.2 | °C/W | 6 | |||
| Junction-to-board characterization parameter, DBV (SOT) 5-pin | ΨJB | 104.9 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
OPA325IDBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa325idbvt-etched.step/opa325idbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa325idbvt.step/opa325idbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
a648d51a07ecc416, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).