Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MS51TC0AE

Nuvoton Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-32-EP(4x4)

MS51TC0AE from Nuvoton Tech, in a QFN-32-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 nRESET / P2.0 input Schmitt trigger input for hardware device reset where a low resets the device, with an internal pull-up that allows power-on reset by connecting an external capacitor to VSS; shares function with Port 2 bit 0 input available when RPD (CONFIG0.2) is programmed as 0.
2 P3.0 bidirectional Port 3 bit 0, also ADC_CH1, SPI0_MOSI, UART2_TXD, SC0_CLK, INT0 and OSCIN (external clock input when EXTEN[1:0] = 11b).
3 P1.7 bidirectional Port 1 bit 7, also ADC_CH0, SPI0_CLK, UART2_RXD, SC0_DAT and external interrupt INT1.
4 VSS power_in Ground potential.
5 P1.6 bidirectional Port 1 bit 6, also I2C0_SDA, UART1_TXD and ICE_DAT (ICE data input or output).
6 VDD power_in Supply voltage VDD for operation.
7 P1.5 bidirectional Port 1 bit 5, also PWM0_CH5, PWM3_CH1, IC7, SPI0_SS, UART3_TXD and SC1_CLK.
8 P2.5 bidirectional Port 2 bit 5, also ADC_CH15, SPI0_MISO, UART3_RXD and SC1_DAT.
9 P3.6 bidirectional Port 3 bit 6, also UART1_TXD.
10 P3.7 bidirectional Port 3 bit 7, also UART1_RXD.
11 P1.4 bidirectional Port 1 bit 4, also ADC_CH14, PWM0_CH1, PWM1_CH1, I2C0_SDA and PWM0_Brake (PWM0 fault brake input).
12 P1.3 bidirectional Port 1 bit 3, also ADC_CH13, I2C0_SCL and STADC (external ADC start trigger).
13 P2.4 bidirectional Port 2 bit 4, also ADC_CH12 and T0 (external count input to Timer/Counter 0).
14 P2.3 bidirectional Port 2 bit 3, also ADC_CH11, PWM1_CH0, UART4_TXD and SC2_CLK.
15 P2.2 bidirectional Port 2 bit 2, also ADC_CH10, PWM1_CH1, UART4_RXD and SC2_DAT.
16 P2.1 bidirectional Port 2 bit 1, also ADC_CH9 and PWM2_CH0.
17 P3.5 bidirectional Port 3 bit 5, also SPI0_SS (SPI0 slave select input).
18 P3.1 bidirectional Port 3 bit 1, also PWM2_CH1.
19 P3.2 bidirectional Port 3 bit 2, also PWM3_CH0.
20 P1.2 bidirectional Port 1 bit 2, also PWM0_CH0, PWM1_CH0, IC0, UART3_TXD and SC1_CLK.
21 P1.1 bidirectional Port 1 bit 1, also ADC_CH7, PWM0_CH1, PWM1_CH1, IC1, UART3_RXD, SC1_DAT and CLKO (system clock output).
22 P1.0 bidirectional Port 1 bit 0, also PWM0_CH2, PWM2_CH0, IC2, SPI0_CLK and UART1_TXD.
23 P0.0 bidirectional Port 0 bit 0, also PWM0_CH3, PWM2_CH1, IC3, SPI0_MOSI, UART1_RXD, T1, XT1_IN (external 4-24 MHz crystal input), OSCIN and T1.
24 P0.1 bidirectional Port 0 bit 1, also PWM0_CH4, PWM3_CH0, IC4, SPI0_MISO and XT1_OUT (external 4-24 MHz crystal output).
25 P3.3 bidirectional Port 3 bit 3, also PWM0_CH0, CLK_OUT (system clock output) and PWM0_Brake (PWM0 fault brake input).
26 P0.2 bidirectional Port 0 bit 2, also I2C0_SCL, UART1_RXD and ICE_CLK (ICE/ICP clock input).
27 P0.3 bidirectional Port 0 bit 3, also ADC_CH6, PWM0_CH5, PWM3_CH1, IC5, UART2_TXD and SC0_CLK (Smart Card 0 clock).
28 P0.4 bidirectional Port 0 bit 4, also ADC_CH5, PWM0_CH3, PWM2_CH1, IC3, UART2_RXD, SC0_DAT and STADC (external ADC start trigger).
29 P0.5 bidirectional Port 0 bit 5, also ADC_CH4, PWM0_CH2, PWM2_CH0, IC6, UART3_TXD, SC1_CLK and T0 (external count input to Timer/Counter 0).
30 P0.6 bidirectional Port 0 bit 6, also ADC_CH3 and UART0_TXD (UART0 transmit data output).
31 P0.7 bidirectional Port 0 bit 7, also ADC_CH2 and UART0_RXD.
32 P3.4 bidirectional Port 3 bit 4, also PWM3_CH1, UART3_RXD and SC1_DAT.
33 VSS power_in Ground potential.

Key specifications

Parameter Value
Manufacturer Nuvoton Tech
Package QFN-32-EP(4x4)
Category Embedded Processors & Controllers
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Temperature TA -40 105 ℃ 51
Operation voltage VDD 2.4 5.5 V 51
Band-gap voltage VBG 1.17 1.22 1.3 V TA = 25 °C 51
Band-gap voltage VBG 1.14 1.33 V TA = -40°C ~105 °C 51
Normal run supply current IDD_RUN 3.6 4.8 mA Normal run mode, executed from Flash, all peripherals disable; 24 MHz(HIRC) @5.5V 52
Normal run supply current IDD_RUN 3.3 4.6 mA Normal run mode, executed from Flash, all peripherals disable; 16 MHz (HIRC) @5.5V 52
Idle mode supply current IDD_IDLE 2.8 3.8 mA Idle mode, executed from Flash, all peripherals disable; 24 MHz(HIRC) @5.5V 53
Idle mode supply current IDD_IDLE 2.2 3.2 mA Idle mode, executed from Flash, all peripherals disable; 16 MHz (HIRC) @5.5V 53
Power down mode supply current IDD_PD 6.5 55 µA Power down mode, all peripherals disable @5.5V 53
Wakeup from IDLE mode tWU_IDLE 5 6 cycles 54
Wakeup from Power down mode tWU_NPD 30 µs Fsys = HIRC @16MHz 54
Sink current for push-pull mode and low level ISK 18 20 mA VDD = 5.5 V, VIN = 0.4 V 56
Sink current for push-pull mode and low level ISK 16 18 mA VDD = 3.3 V, VIN = 0.4 V 56
Source current for push-pull mode and high level ISR -9 -9.6 mA VDD = 5.5 V, VIN =(VDD-0.4) V 56
Source current for push-pull mode and high level ISR -6 -6.6 mA VDD = 3.3 V, VIN =(VDD-0.4) V 56
Source current for quasi-bidirectional mode and high level ISR -7.4 -7.5 µA VDD = 5.5 V, VIN =(VDD-0.4) V 56
I/O pin capacitance CIO 5 pF 56
Internal nRESET pull up resistor RRST 45 60 KΩ VDD = 5.5 V 57
Internal nRESET pull up resistor RRST 45 65 KΩ VDD = 2.4 V 57
nRESET input response time tFR 1.5 µs Normal run and Idle mode 57
nRESET input response time tFR 10 25 µs Power down mode 57
Frequency drift over temperature and voltage (16 MHz HIRC) -1 1 % TA = 25 °C, VDD = 3.3V 58
Frequency drift over temperature and voltage (16 MHz HIRC) -2 2 % TA = -20 C ~ +105 °C, VDD = 2.4 ~ 5.5V 58
Frequency drift over temperature and voltage (16 MHz HIRC) -4 4 % TA = -40 C ~ -20 °C, VDD = 2.4 ~ 5.5V 58
Operating current (16 MHz HIRC) IHRC 490 550 µA 58
Stable time (16 MHz HIRC) TS 3 5 µs TA = -40C ~ +105 °C, VDD = 2.4 ~ 5.5V 58
Frequency drift over temperature and voltage (24 MHz HIRC) -1 1 % TA = 25 °C, VDD = 3.3V 59
Frequency drift over temperature and voltage (24 MHz HIRC) -2 2 % TA = -20C ~ +85 °C, VDD = 2.4 ~ 5.5V 59
Frequency drift over temperature and voltage (24 MHz HIRC) -4 4 % TA = -40C ~ +105 °C, VDD = 2.4 ~ 5.5V 59
Operating current (24 MHz HIRC) IHRC 490 550 µA 59
Stable time (24 MHz HIRC) TS 3 5 µs TA = -40C ~ +105 °C, VDD = 2.4 ~ 5.5V 59
Operating voltage (HXT) VDD 1.8 5.5 V 60
Oscillator frequency (HXT) fHXT 4 24 MHz 60
Current consumption (HXT) IHXT 80 180 µA 4 MHz, Gain = L0 60
Current consumption (HXT) IHXT 110 300 µA 8 MHz, Gain = L1 60
Current consumption (HXT) IHXT 180 500 µA 12 MHz, Gain = L2 60
Current consumption (HXT) IHXT 230 650 µA 16 MHz, Gain = L3 60
Current consumption (HXT) IHXT 360 975 µA 24 MHz, Gain = L4 60
Stable time (HXT) TS 3500 3700 µs 4 MHz, Gain = L0 60
Stable time (HXT) TS 950 1050 µs 8 MHz, Gain = L1 60
Stable time (HXT) TS 700 850 µs 12 MHz, Gain = L2 60
Stable time (HXT) TS 450 550 µs 16 MHz, Gain = L3 60
Stable time (HXT) TS 400 570 µs 24 MHz, Gain = L4 60
Duty cycle (HXT) DuHXT 40 60 % 60
Clock low time (external clock input) tCLCX 8 ns 61
Clock rise time (external clock input) tCLCH 10 ns Low (10%) to high level (90%) rise time 61
Clock fall time (external clock input) tCHCL 10 ns High (90%) to low level (10%) fall time 61
Duty cycle (external clock input) DuE_HXT 40 60 % 61
Frequency drift over temperature and voltage (LIRC) -10 10 % TA = 25 °C, VDD = 5V 62
Frequency drift over temperature and voltage (LIRC) -35 35 % TA=-40~105°C, without software calibration 62
Operating current (LIRC) ILRC 0.85 1 µA VDD = 3.3V 62
Reset voltage (POR) VPOR 1 1.15 1.3 V 64
Reset voltage (LVR) VLVR 1.7 2 2.4 V 64
Brown-out detect voltage VBOD 4.25 4.4 4.55 V BOV[1:0] = [0,0] 64
Brown-out detect voltage VBOD 3.55 3.7 3.85 V BOV[1:0] = [0,1] 64
Brown-out detect voltage VBOD 2.6 2.7 2.8 V BOV[1:0] = [1,0] 64
Brown-out detect voltage VBOD 2.1 2.2 2.35 V BOV[1:0] = [1,1] 64
Allowed voltage difference for VDD and AVDD /VDD -AVDD/ 50 mV 68
DC power supply VDD-VSS -0.3 6.5 V 68
Maximum current sunk by a I/O Pin IIO 22 mA 68
Maximum current sourced by a I/O Pin IIO 10 mA 68
Maximum current into VDD ΣIDD 200 mA 68
Maximum current out of VSS ΣISS 200 mA 68
Maximum current sunk by total I/O Pins 100 mA 68
Maximum current sourced by total I/O Pins 100 mA 68
Operating junction temperature TJ -40 125 °C 69
Storage temperature TST -65 150 69

CAD (KiCad official)

  • Symbol: MS51TC0AE
  • Footprint: Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm
  • 3D model: QFN-32-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: ms51tc0ae-etched.step / ms51tc0ae-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ms51tc0ae.step / ms51tc0ae.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Nuvoton Tech datasheet (80 pp, sha256 e35d99f6bd633b70, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF