Generated by kicad-footprint-generator · KiCad file format 20260206
MS51TC0AE
Nuvoton Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-32-EP(4x4)
MS51TC0AE from Nuvoton Tech, in a QFN-32-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | nRESET / P2.0 | input | Schmitt trigger input for hardware device reset where a low resets the device, with an internal pull-up that allows power-on reset by connecting an external capacitor to VSS; shares function with Port 2 bit 0 input available when RPD (CONFIG0.2) is programmed as 0. |
| 2 | P3.0 | bidirectional | Port 3 bit 0, also ADC_CH1, SPI0_MOSI, UART2_TXD, SC0_CLK, INT0 and OSCIN (external clock input when EXTEN[1:0] = 11b). |
| 3 | P1.7 | bidirectional | Port 1 bit 7, also ADC_CH0, SPI0_CLK, UART2_RXD, SC0_DAT and external interrupt INT1. |
| 4 | VSS | power_in | Ground potential. |
| 5 | P1.6 | bidirectional | Port 1 bit 6, also I2C0_SDA, UART1_TXD and ICE_DAT (ICE data input or output). |
| 6 | VDD | power_in | Supply voltage VDD for operation. |
| 7 | P1.5 | bidirectional | Port 1 bit 5, also PWM0_CH5, PWM3_CH1, IC7, SPI0_SS, UART3_TXD and SC1_CLK. |
| 8 | P2.5 | bidirectional | Port 2 bit 5, also ADC_CH15, SPI0_MISO, UART3_RXD and SC1_DAT. |
| 9 | P3.6 | bidirectional | Port 3 bit 6, also UART1_TXD. |
| 10 | P3.7 | bidirectional | Port 3 bit 7, also UART1_RXD. |
| 11 | P1.4 | bidirectional | Port 1 bit 4, also ADC_CH14, PWM0_CH1, PWM1_CH1, I2C0_SDA and PWM0_Brake (PWM0 fault brake input). |
| 12 | P1.3 | bidirectional | Port 1 bit 3, also ADC_CH13, I2C0_SCL and STADC (external ADC start trigger). |
| 13 | P2.4 | bidirectional | Port 2 bit 4, also ADC_CH12 and T0 (external count input to Timer/Counter 0). |
| 14 | P2.3 | bidirectional | Port 2 bit 3, also ADC_CH11, PWM1_CH0, UART4_TXD and SC2_CLK. |
| 15 | P2.2 | bidirectional | Port 2 bit 2, also ADC_CH10, PWM1_CH1, UART4_RXD and SC2_DAT. |
| 16 | P2.1 | bidirectional | Port 2 bit 1, also ADC_CH9 and PWM2_CH0. |
| 17 | P3.5 | bidirectional | Port 3 bit 5, also SPI0_SS (SPI0 slave select input). |
| 18 | P3.1 | bidirectional | Port 3 bit 1, also PWM2_CH1. |
| 19 | P3.2 | bidirectional | Port 3 bit 2, also PWM3_CH0. |
| 20 | P1.2 | bidirectional | Port 1 bit 2, also PWM0_CH0, PWM1_CH0, IC0, UART3_TXD and SC1_CLK. |
| 21 | P1.1 | bidirectional | Port 1 bit 1, also ADC_CH7, PWM0_CH1, PWM1_CH1, IC1, UART3_RXD, SC1_DAT and CLKO (system clock output). |
| 22 | P1.0 | bidirectional | Port 1 bit 0, also PWM0_CH2, PWM2_CH0, IC2, SPI0_CLK and UART1_TXD. |
| 23 | P0.0 | bidirectional | Port 0 bit 0, also PWM0_CH3, PWM2_CH1, IC3, SPI0_MOSI, UART1_RXD, T1, XT1_IN (external 4-24 MHz crystal input), OSCIN and T1. |
| 24 | P0.1 | bidirectional | Port 0 bit 1, also PWM0_CH4, PWM3_CH0, IC4, SPI0_MISO and XT1_OUT (external 4-24 MHz crystal output). |
| 25 | P3.3 | bidirectional | Port 3 bit 3, also PWM0_CH0, CLK_OUT (system clock output) and PWM0_Brake (PWM0 fault brake input). |
| 26 | P0.2 | bidirectional | Port 0 bit 2, also I2C0_SCL, UART1_RXD and ICE_CLK (ICE/ICP clock input). |
| 27 | P0.3 | bidirectional | Port 0 bit 3, also ADC_CH6, PWM0_CH5, PWM3_CH1, IC5, UART2_TXD and SC0_CLK (Smart Card 0 clock). |
| 28 | P0.4 | bidirectional | Port 0 bit 4, also ADC_CH5, PWM0_CH3, PWM2_CH1, IC3, UART2_RXD, SC0_DAT and STADC (external ADC start trigger). |
| 29 | P0.5 | bidirectional | Port 0 bit 5, also ADC_CH4, PWM0_CH2, PWM2_CH0, IC6, UART3_TXD, SC1_CLK and T0 (external count input to Timer/Counter 0). |
| 30 | P0.6 | bidirectional | Port 0 bit 6, also ADC_CH3 and UART0_TXD (UART0 transmit data output). |
| 31 | P0.7 | bidirectional | Port 0 bit 7, also ADC_CH2 and UART0_RXD. |
| 32 | P3.4 | bidirectional | Port 3 bit 4, also PWM3_CH1, UART3_RXD and SC1_DAT. |
| 33 | VSS | power_in | Ground potential. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nuvoton Tech |
| Package | QFN-32-EP(4x4) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Temperature | TA | -40 | 105 | ℃ | 51 | ||
| Operation voltage | VDD | 2.4 | 5.5 | V | 51 | ||
| Band-gap voltage | VBG | 1.17 | 1.22 | 1.3 | V | TA = 25 °C | 51 |
| Band-gap voltage | VBG | 1.14 | 1.33 | V | TA = -40°C ~105 °C | 51 | |
| Normal run supply current | IDD_RUN | 3.6 | 4.8 | mA | Normal run mode, executed from Flash, all peripherals disable; 24 MHz(HIRC) @5.5V | 52 | |
| Normal run supply current | IDD_RUN | 3.3 | 4.6 | mA | Normal run mode, executed from Flash, all peripherals disable; 16 MHz (HIRC) @5.5V | 52 | |
| Idle mode supply current | IDD_IDLE | 2.8 | 3.8 | mA | Idle mode, executed from Flash, all peripherals disable; 24 MHz(HIRC) @5.5V | 53 | |
| Idle mode supply current | IDD_IDLE | 2.2 | 3.2 | mA | Idle mode, executed from Flash, all peripherals disable; 16 MHz (HIRC) @5.5V | 53 | |
| Power down mode supply current | IDD_PD | 6.5 | 55 | µA | Power down mode, all peripherals disable @5.5V | 53 | |
| Wakeup from IDLE mode | tWU_IDLE | 5 | 6 | cycles | 54 | ||
| Wakeup from Power down mode | tWU_NPD | 30 | µs | Fsys = HIRC @16MHz | 54 | ||
| Sink current for push-pull mode and low level | ISK | 18 | 20 | mA | VDD = 5.5 V, VIN = 0.4 V | 56 | |
| Sink current for push-pull mode and low level | ISK | 16 | 18 | mA | VDD = 3.3 V, VIN = 0.4 V | 56 | |
| Source current for push-pull mode and high level | ISR | -9 | -9.6 | mA | VDD = 5.5 V, VIN =(VDD-0.4) V | 56 | |
| Source current for push-pull mode and high level | ISR | -6 | -6.6 | mA | VDD = 3.3 V, VIN =(VDD-0.4) V | 56 | |
| Source current for quasi-bidirectional mode and high level | ISR | -7.4 | -7.5 | µA | VDD = 5.5 V, VIN =(VDD-0.4) V | 56 | |
| I/O pin capacitance | CIO | 5 | pF | 56 | |||
| Internal nRESET pull up resistor | RRST | 45 | 60 | KΩ | VDD = 5.5 V | 57 | |
| Internal nRESET pull up resistor | RRST | 45 | 65 | KΩ | VDD = 2.4 V | 57 | |
| nRESET input response time | tFR | 1.5 | µs | Normal run and Idle mode | 57 | ||
| nRESET input response time | tFR | 10 | 25 | µs | Power down mode | 57 | |
| Frequency drift over temperature and voltage (16 MHz HIRC) | -1 | 1 | % | TA = 25 °C, VDD = 3.3V | 58 | ||
| Frequency drift over temperature and voltage (16 MHz HIRC) | -2 | 2 | % | TA = -20 C ~ +105 °C, VDD = 2.4 ~ 5.5V | 58 | ||
| Frequency drift over temperature and voltage (16 MHz HIRC) | -4 | 4 | % | TA = -40 C ~ -20 °C, VDD = 2.4 ~ 5.5V | 58 | ||
| Operating current (16 MHz HIRC) | IHRC | 490 | 550 | µA | 58 | ||
| Stable time (16 MHz HIRC) | TS | 3 | 5 | µs | TA = -40C ~ +105 °C, VDD = 2.4 ~ 5.5V | 58 | |
| Frequency drift over temperature and voltage (24 MHz HIRC) | -1 | 1 | % | TA = 25 °C, VDD = 3.3V | 59 | ||
| Frequency drift over temperature and voltage (24 MHz HIRC) | -2 | 2 | % | TA = -20C ~ +85 °C, VDD = 2.4 ~ 5.5V | 59 | ||
| Frequency drift over temperature and voltage (24 MHz HIRC) | -4 | 4 | % | TA = -40C ~ +105 °C, VDD = 2.4 ~ 5.5V | 59 | ||
| Operating current (24 MHz HIRC) | IHRC | 490 | 550 | µA | 59 | ||
| Stable time (24 MHz HIRC) | TS | 3 | 5 | µs | TA = -40C ~ +105 °C, VDD = 2.4 ~ 5.5V | 59 | |
| Operating voltage (HXT) | VDD | 1.8 | 5.5 | V | 60 | ||
| Oscillator frequency (HXT) | fHXT | 4 | 24 | MHz | 60 | ||
| Current consumption (HXT) | IHXT | 80 | 180 | µA | 4 MHz, Gain = L0 | 60 | |
| Current consumption (HXT) | IHXT | 110 | 300 | µA | 8 MHz, Gain = L1 | 60 | |
| Current consumption (HXT) | IHXT | 180 | 500 | µA | 12 MHz, Gain = L2 | 60 | |
| Current consumption (HXT) | IHXT | 230 | 650 | µA | 16 MHz, Gain = L3 | 60 | |
| Current consumption (HXT) | IHXT | 360 | 975 | µA | 24 MHz, Gain = L4 | 60 | |
| Stable time (HXT) | TS | 3500 | 3700 | µs | 4 MHz, Gain = L0 | 60 | |
| Stable time (HXT) | TS | 950 | 1050 | µs | 8 MHz, Gain = L1 | 60 | |
| Stable time (HXT) | TS | 700 | 850 | µs | 12 MHz, Gain = L2 | 60 | |
| Stable time (HXT) | TS | 450 | 550 | µs | 16 MHz, Gain = L3 | 60 | |
| Stable time (HXT) | TS | 400 | 570 | µs | 24 MHz, Gain = L4 | 60 | |
| Duty cycle (HXT) | DuHXT | 40 | 60 | % | 60 | ||
| Clock low time (external clock input) | tCLCX | 8 | ns | 61 | |||
| Clock rise time (external clock input) | tCLCH | 10 | ns | Low (10%) to high level (90%) rise time | 61 | ||
| Clock fall time (external clock input) | tCHCL | 10 | ns | High (90%) to low level (10%) fall time | 61 | ||
| Duty cycle (external clock input) | DuE_HXT | 40 | 60 | % | 61 | ||
| Frequency drift over temperature and voltage (LIRC) | -10 | 10 | % | TA = 25 °C, VDD = 5V | 62 | ||
| Frequency drift over temperature and voltage (LIRC) | -35 | 35 | % | TA=-40~105°C, without software calibration | 62 | ||
| Operating current (LIRC) | ILRC | 0.85 | 1 | µA | VDD = 3.3V | 62 | |
| Reset voltage (POR) | VPOR | 1 | 1.15 | 1.3 | V | 64 | |
| Reset voltage (LVR) | VLVR | 1.7 | 2 | 2.4 | V | 64 | |
| Brown-out detect voltage | VBOD | 4.25 | 4.4 | 4.55 | V | BOV[1:0] = [0,0] | 64 |
| Brown-out detect voltage | VBOD | 3.55 | 3.7 | 3.85 | V | BOV[1:0] = [0,1] | 64 |
| Brown-out detect voltage | VBOD | 2.6 | 2.7 | 2.8 | V | BOV[1:0] = [1,0] | 64 |
| Brown-out detect voltage | VBOD | 2.1 | 2.2 | 2.35 | V | BOV[1:0] = [1,1] | 64 |
| Allowed voltage difference for VDD and AVDD | /VDD -AVDD/ | 50 | mV | 68 | |||
| DC power supply | VDD-VSS | -0.3 | 6.5 | V | 68 | ||
| Maximum current sunk by a I/O Pin | IIO | 22 | mA | 68 | |||
| Maximum current sourced by a I/O Pin | IIO | 10 | mA | 68 | |||
| Maximum current into VDD | ΣIDD | 200 | mA | 68 | |||
| Maximum current out of VSS | ΣISS | 200 | mA | 68 | |||
| Maximum current sunk by total I/O Pins | 100 | mA | 68 | ||||
| Maximum current sourced by total I/O Pins | 100 | mA | 68 | ||||
| Operating junction temperature | TJ | -40 | 125 | °C | 69 | ||
| Storage temperature | TST | -65 | 150 | 69 |
CAD (KiCad official)
- Symbol:
MS51TC0AE - Footprint:
Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm - 3D model: QFN-32-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
ms51tc0ae-etched.step/ms51tc0ae-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ms51tc0ae.step/ms51tc0ae.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nuvoton Tech datasheet (80 pp, sha256
e35d99f6bd633b70, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).