3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownP82B96P
Texas Instruments · Interface - Specialized · PDIP-8
P82B96P from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Sx | bidirectional | Serial data bus or SDA on the main side, connected to the VCC of the I2C master through a pullup resistor. |
| 2 | Rx | input | Receive signal, connected to VCC of the P82B96 through a pullup resistor. |
| 3 | Tx | output | Transmit signal, connected to VCC of the P82B96 through a pullup resistor. |
| 4 | GND | power_in | Ground. |
| 5 | Ty | output | Transmit signal, connected to VCC of the P82B96 through a pullup resistor. |
| 6 | Ry | input | Receive signal, connected to VCC of the P82B96 through a pullup resistor. |
| 7 | Sy | bidirectional | Serial clock bus or SCL on the main side, connected to the VCC of the I2C master through a pullup resistor. |
| 8 | VCC | power_in | Supply voltage, specified at 2 V to 15 V in the recommended operating conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2 | 15 | V | 5 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 5 | ||
| Low-level output current Sx, Sy | IOL | 3 | mA | VSx, VSy = 1 V, VRx, VRy ≤ 0.42 V | 5 | ||
| Low-level output current Tx, Ty | IOL | 30 | mA | VSx, VSy = 0.4 V, VTx, VTy = 0.4 V | 5 | ||
| Low-level output current Sx, Sy | IOL | 15 | mA | VTx, VTy = 0.4 V | 5 | ||
| Low-level output current Tx, Ty | IOL | 15 | mA | VSx, VSy = 0.4 V | 5 | ||
| Maximum input/output voltage level Sx, Sy | VIOmax | 15 | V | VTx, VTy = 0.4 V | 5 | ||
| Maximum input/output voltage level Tx, Ty | VIOmax | 15 | V | VSx, VSy = 0.4 V | 5 | ||
| Low-level input voltage difference Sx, Sy | VILdiff | 0.4 | V | 5 | |||
| Supply voltage on VCC pin | VCC | -0.3 | 18 | V | 5 | ||
| Voltage on buffered input Sx or Sy (SDA or SCL) | VI | -0.3 | 18 | V | 5 | ||
| Voltage on buffered input Rx or Ry | VI | -0.3 | 18 | V | 5 | ||
| Voltage on buffered output Sx or Sy (SDA or SCL) | VO | -0.3 | 18 | V | 5 | ||
| Voltage on buffered output Tx or Ty | VO | -0.3 | 18 | V | 5 | ||
| Continuous output current Sx or Sy | IO | 250 | mA | 5 | |||
| Continuous output current Tx or Ty | IO | 250 | mA | 5 | |||
| Continuous current through VCC or GND | ICC | 250 | mA | 5 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | 5 | ||
| Storage temperature | Tstg | -55 | 125 | °C | 5 | ||
| Junction-to-ambient thermal resistance (P package) | RθJA | 53.5 | °C/W | P (PDIP) package, 8 pins | 5 | ||
| Junction-to-case (top) thermal resistance (P package) | RθJC(top) | 44.4 | °C/W | P (PDIP) package, 8 pins | 5 | ||
| Junction-to-board thermal resistance (P package) | RθJB | 30.6 | °C/W | P (PDIP) package, 8 pins | 5 | ||
| Junction-to-top characterization parameter (P package) | ψJT | 22.9 | °C/W | P (PDIP) package, 8 pins | 5 | ||
| Junction-to-board characterization parameter (P package) | ψJB | 30.5 | °C/W | P (PDIP) package, 8 pins | 5 | ||
| Low-level output voltage Sx, Sy | VOL | 0.8 | 0.88 | 1 | V | VCC = 4.5 V to 5.5 V, TA = 25°C, ISx, ISy = 3 mA | 8 |
| Low-level output voltage Sx, Sy | VOL | 0.67 | 0.73 | 0.79 | V | VCC = 4.5 V to 5.5 V, TA = 25°C, ISx, ISy = 0.2 mA | 8 |
| Quiescent supply current | ICC | 0.9 | 1.8 | 2 | mA | VCC = 4.5 V to 5.5 V, TA = 25°C, Sx = Sy = VCC | 8 |
| Additional supply current per pin low | ΔICC | 1.7 | 2.75 | 3 | mA | VCC = 4.5 V to 5.5 V, TA = 25°C, Tx, Ty | 8 |
| Dynamic output sink capability on I2C bus | IIOS | 7 | 18 | mA | VCC = 4.5 V to 5.5 V, TA = 25°C, VSx, VSy > 2 V, VRx, VRy = low | 8 | |
| Dynamic output sink capability on I2C bus | IIOS | 6 | mA | VCC = 4.5 V to 5.5 V, TA = -40°C to 85°C, VSx, VSy > 2 V, VRx, VRy = low | 8 | ||
| Leakage current on I2C bus | IIOS | 0.1 | 1 | μA | VCC = 4.5 V to 5.5 V, VSx, VSy = 5 V, VRx, VRy = high | 8 | |
| Dynamic output sink capability on buffered bus | IIOT | 60 | 100 | mA | VCC = 4.5 V to 5.5 V, TA = 25°C, VTx, VTy > 1 V, VSx, VSy = low, I2C bus = 0.4 V | 8 | |
| Leakage current on buffered bus | IIOT | 0.1 | 1 | μA | VCC = 4.5 V to 5.5 V, VTx, VTy = VCC = 5 V, VSx, VSy = high | 8 | |
| Input current from I2C bus | II | -1 | 1 | μA | VCC = 4.5 V to 5.5 V, Sx, Sy bus low, VRx, VRy = high | 8 | |
| Input current from buffered bus Rx, Ry | II | -1 | 1 | μA | VCC = 4.5 V to 5.5 V, bus low, VRx, VRy = 0.4 V | 8 | |
| Leakage current on buffered bus input | II | 1 | 1.5 | μA | VCC = 4.5 V to 5.5 V, VRx, VRy = VCC | 8 | |
| Input logic level high threshold on normal I2C bus Sx, Sy | VIT | 0.65 | 0.7 | V | VCC = 4.5 V to 5.5 V, see Typical Characteristics | 8 | |
| Input logic level low threshold on normal I2C bus Sx, Sy | VIT | 0.6 | 0.65 | V | VCC = 4.5 V to 5.5 V, see Typical Characteristics | 8 | |
| Input logic level high threshold Rx, Ry | VIT | 0.58 | x VCC | VCC = 4.5 V to 5.5 V | 8 | ||
| Input logic level low threshold Rx, Ry | VIT | 0.42 | x VCC | VCC = 4.5 V to 5.5 V | 8 | ||
| Input/output logic level difference for I2C applications | VIOdiff | 100 | 150 | mV | VCC = 4.5 V to 5.5 V, VSx output low at 3 mA, VSx input high max | 8 | |
| VCC voltage at which all buses are released | VIOrel | 1 | 1 | V | VCC = 4.5 V to 5.5 V, Sx, Sy and Tx, Ty lowered until released | 8 | |
| Temperature coefficient of input thresholds | ΔV/ΔTIN | -2 | mV/°C | VCC = 4.5 V to 5.5 V, Sx, Sy | 8 | ||
| Temperature coefficient of output low levels | ΔV/ΔTOUT | -1.8 | mV/°C | VCC = 4.5 V to 5.5 V, Sx, Sy, ISx, ISy = 0.2 mA | 8 | ||
| Temperature coefficient of release voltage | ΔV/ΔTREL | -4 | mV/°C | VCC = 4.5 V to 5.5 V | 9 | ||
| Input capacitance Rx, Ry | Cin | 2.5 | 4 | pF | VCC = 4.5 V to 5.5 V | 9 |
CAD (KiCad official)
- Symbol:
P82B96P - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
p82b96p-etched.step/p82b96p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);p82b96p.step/p82b96p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
8a684e53944a9929, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).