main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers p82b96p: viewers · Ray
p82b96p-etched.glb p82b96p: factory component page (tier=mfr) · Ray
p82b96p-etched.step p82b96p: factory component page (tier=mfr) · Ray
p82b96p-hero.glb p82b96p: hero GLB from the etched model (keeps the MPN mark) · Ray
p82b96p-hero.overlay.json p82b96p: hero GLB from the etched model (keeps the MPN mark) · Ray
p82b96p.glb Publish 0.1.0 · Ray
p82b96p.kicad_mod Publish 0.1.0 · Ray
p82b96p.kicad_sym Publish 0.1.0 · Ray
p82b96p.lbr Publish 0.1.0 · Ray
p82b96p.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

P82B96P

Texas Instruments · Interface - Specialized · PDIP-8

P82B96P from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Sx bidirectional Serial data bus or SDA on the main side, connected to the VCC of the I2C master through a pullup resistor.
2 Rx input Receive signal, connected to VCC of the P82B96 through a pullup resistor.
3 Tx output Transmit signal, connected to VCC of the P82B96 through a pullup resistor.
4 GND power_in Ground.
5 Ty output Transmit signal, connected to VCC of the P82B96 through a pullup resistor.
6 Ry input Receive signal, connected to VCC of the P82B96 through a pullup resistor.
7 Sy bidirectional Serial clock bus or SCL on the main side, connected to the VCC of the I2C master through a pullup resistor.
8 VCC power_in Supply voltage, specified at 2 V to 15 V in the recommended operating conditions.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-8
Category Communication Interface Chip/UART/485/232
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 2 15 V 5
Operating free-air temperature TA -40 85 °C 5
Low-level output current Sx, Sy IOL 3 mA VSx, VSy = 1 V, VRx, VRy ≤ 0.42 V 5
Low-level output current Tx, Ty IOL 30 mA VSx, VSy = 0.4 V, VTx, VTy = 0.4 V 5
Low-level output current Sx, Sy IOL 15 mA VTx, VTy = 0.4 V 5
Low-level output current Tx, Ty IOL 15 mA VSx, VSy = 0.4 V 5
Maximum input/output voltage level Sx, Sy VIOmax 15 V VTx, VTy = 0.4 V 5
Maximum input/output voltage level Tx, Ty VIOmax 15 V VSx, VSy = 0.4 V 5
Low-level input voltage difference Sx, Sy VILdiff 0.4 V 5
Supply voltage on VCC pin VCC -0.3 18 V 5
Voltage on buffered input Sx or Sy (SDA or SCL) VI -0.3 18 V 5
Voltage on buffered input Rx or Ry VI -0.3 18 V 5
Voltage on buffered output Sx or Sy (SDA or SCL) VO -0.3 18 V 5
Voltage on buffered output Tx or Ty VO -0.3 18 V 5
Continuous output current Sx or Sy IO 250 mA 5
Continuous output current Tx or Ty IO 250 mA 5
Continuous current through VCC or GND ICC 250 mA 5
Operating free-air temperature TA -40 85 °C 5
Storage temperature Tstg -55 125 °C 5
Junction-to-ambient thermal resistance (P package) RθJA 53.5 °C/W P (PDIP) package, 8 pins 5
Junction-to-case (top) thermal resistance (P package) RθJC(top) 44.4 °C/W P (PDIP) package, 8 pins 5
Junction-to-board thermal resistance (P package) RθJB 30.6 °C/W P (PDIP) package, 8 pins 5
Junction-to-top characterization parameter (P package) ψJT 22.9 °C/W P (PDIP) package, 8 pins 5
Junction-to-board characterization parameter (P package) ψJB 30.5 °C/W P (PDIP) package, 8 pins 5
Low-level output voltage Sx, Sy VOL 0.8 0.88 1 V VCC = 4.5 V to 5.5 V, TA = 25°C, ISx, ISy = 3 mA 8
Low-level output voltage Sx, Sy VOL 0.67 0.73 0.79 V VCC = 4.5 V to 5.5 V, TA = 25°C, ISx, ISy = 0.2 mA 8
Quiescent supply current ICC 0.9 1.8 2 mA VCC = 4.5 V to 5.5 V, TA = 25°C, Sx = Sy = VCC 8
Additional supply current per pin low ΔICC 1.7 2.75 3 mA VCC = 4.5 V to 5.5 V, TA = 25°C, Tx, Ty 8
Dynamic output sink capability on I2C bus IIOS 7 18 mA VCC = 4.5 V to 5.5 V, TA = 25°C, VSx, VSy > 2 V, VRx, VRy = low 8
Dynamic output sink capability on I2C bus IIOS 6 mA VCC = 4.5 V to 5.5 V, TA = -40°C to 85°C, VSx, VSy > 2 V, VRx, VRy = low 8
Leakage current on I2C bus IIOS 0.1 1 μA VCC = 4.5 V to 5.5 V, VSx, VSy = 5 V, VRx, VRy = high 8
Dynamic output sink capability on buffered bus IIOT 60 100 mA VCC = 4.5 V to 5.5 V, TA = 25°C, VTx, VTy > 1 V, VSx, VSy = low, I2C bus = 0.4 V 8
Leakage current on buffered bus IIOT 0.1 1 μA VCC = 4.5 V to 5.5 V, VTx, VTy = VCC = 5 V, VSx, VSy = high 8
Input current from I2C bus II -1 1 μA VCC = 4.5 V to 5.5 V, Sx, Sy bus low, VRx, VRy = high 8
Input current from buffered bus Rx, Ry II -1 1 μA VCC = 4.5 V to 5.5 V, bus low, VRx, VRy = 0.4 V 8
Leakage current on buffered bus input II 1 1.5 μA VCC = 4.5 V to 5.5 V, VRx, VRy = VCC 8
Input logic level high threshold on normal I2C bus Sx, Sy VIT 0.65 0.7 V VCC = 4.5 V to 5.5 V, see Typical Characteristics 8
Input logic level low threshold on normal I2C bus Sx, Sy VIT 0.6 0.65 V VCC = 4.5 V to 5.5 V, see Typical Characteristics 8
Input logic level high threshold Rx, Ry VIT 0.58 x VCC VCC = 4.5 V to 5.5 V 8
Input logic level low threshold Rx, Ry VIT 0.42 x VCC VCC = 4.5 V to 5.5 V 8
Input/output logic level difference for I2C applications VIOdiff 100 150 mV VCC = 4.5 V to 5.5 V, VSx output low at 3 mA, VSx input high max 8
VCC voltage at which all buses are released VIOrel 1 1 V VCC = 4.5 V to 5.5 V, Sx, Sy and Tx, Ty lowered until released 8
Temperature coefficient of input thresholds ΔV/ΔTIN -2 mV/°C VCC = 4.5 V to 5.5 V, Sx, Sy 8
Temperature coefficient of output low levels ΔV/ΔTOUT -1.8 mV/°C VCC = 4.5 V to 5.5 V, Sx, Sy, ISx, ISy = 0.2 mA 8
Temperature coefficient of release voltage ΔV/ΔTREL -4 mV/°C VCC = 4.5 V to 5.5 V 9
Input capacitance Rx, Ry Cin 2.5 4 pF VCC = 4.5 V to 5.5 V 9

CAD (KiCad official)

  • Symbol: P82B96P
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: p82b96p-etched.step / p82b96p-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); p82b96p.step / p82b96p.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 8a684e53944a9929, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF