Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA199B3DCKR

Texas Instruments · Current Sense Amplifiers · SC-70-6

INA199B3DCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Reference voltage input for setting output zero-current baseline, rated 0V to V+; absolute maximum GND-0.3V to (V+)+0.3V.
2 GND power_in Analog ground (0V reference).
3 V+ power_in Analog power supply, operating range 2.7V to 26V.
4 IN+ input Analog input connected to power side of shunt resistor; common-mode input range -0.1V to 26V.
5 IN- input Analog input connected to load side of shunt resistor; common-mode input range -0.1V to 26V.
6 OUT output Analog output voltage proportional to sensed current; output swing range (GND)+0.005V to (V+)-0.05V at 10kΩ load.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode input voltage range (version B) VCM -0.1 26 V Version B and C, TA = -40°C to 125°C 6
Common-mode rejection ratio CMR 100 120 dB VIN+ = 0V to 26V, VSENSE = 0mV, TA = -40°C to 125°C 6
Offset voltage, RTI VOS -150 5 150 μV VSENSE = 0mV 6
Offset voltage drift dVOS/dT 0.1 0.5 μV/°C TA = -40°C to 125°C 6
Gain error (version B) -1.5 0.03 1.5 % VSENSE = -5mV to 5mV, TA = -40°C to 125°C 6
Gain error vs temperature 3 10 ppm/°C TA = -40°C to 125°C 6
Supply voltage operating range VS 2.7 26 V TA = -40°C to 125°C 6
Supply voltage operating range VS 2.5 26 V TA = -20°C to 85°C 6
Quiescent current IQ 65 100 μA VSENSE = 0mV 6
Quiescent current over temperature IQ 115 μA TA = -40°C to 125°C 6
Specified temperature range -40 125 °C 6
Operating temperature range -40 125 °C 6
Common-mode input voltage (recommended) VCM 12 V 5
Operating supply voltage (recommended) VS 5 V Applied to V+ 5
Operating temperature range, natural convection (recommended) TA -40 125 °C Natural ventilation conditions 5
Maximum capacitive load 1 nF No sustained oscillation 6
Junction-to-ambient thermal resistance (DCK, SC70) RθJA 227.3 °C/W DCK (SC70) 6-pin package 5
Junction-to-case (top) thermal resistance (DCK, SC70) RθJC(top) 79.5 °C/W DCK (SC70) 6-pin package 5
Junction-to-board thermal resistance (DCK, SC70) RθJB 72.1 °C/W DCK (SC70) 6-pin package 5
Thermal resistance, SC70 package θJA 250 °C/W SC70 package 7
Gain, INA199x3 G 200 V/V INA199x3 6
Gain bandwidth product GBW 14 kHz CLOAD = 10pF, INA199x3 6
Slew rate SR 0.4 V/μs 6
Voltage noise density, RTI 25 nV/√Hz 6
Power supply rejection PSR 0.1 μV/V VS = 2.7V to 18V, VIN+ = 18V, VSENSE = 0mV 6
Input bias current IB 28 μA VSENSE = 0mV 6
Input offset current IOS 0.02 μA VSENSE = 0mV 6
Nonlinearity error 0.01 % VSENSE = -5mV to 5mV 6

CAD (KiCad official)

  • Symbol: INA199B3DCKR
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: ina199b3dckr-etched.step / ina199b3dckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina199b3dckr.step / ina199b3dckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 f48fb5be37c0cf43, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF