3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA199B3DCKR
Texas Instruments · Current Sense Amplifiers · SC-70-6
INA199B3DCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference voltage input for setting output zero-current baseline, rated 0V to V+; absolute maximum GND-0.3V to (V+)+0.3V. |
| 2 | GND | power_in | Analog ground (0V reference). |
| 3 | V+ | power_in | Analog power supply, operating range 2.7V to 26V. |
| 4 | IN+ | input | Analog input connected to power side of shunt resistor; common-mode input range -0.1V to 26V. |
| 5 | IN- | input | Analog input connected to load side of shunt resistor; common-mode input range -0.1V to 26V. |
| 6 | OUT | output | Analog output voltage proportional to sensed current; output swing range (GND)+0.005V to (V+)-0.05V at 10kΩ load. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input voltage range (version B) | VCM | -0.1 | 26 | V | Version B and C, TA = -40°C to 125°C | 6 | |
| Common-mode rejection ratio | CMR | 100 | 120 | dB | VIN+ = 0V to 26V, VSENSE = 0mV, TA = -40°C to 125°C | 6 | |
| Offset voltage, RTI | VOS | -150 | 5 | 150 | μV | VSENSE = 0mV | 6 |
| Offset voltage drift | dVOS/dT | 0.1 | 0.5 | μV/°C | TA = -40°C to 125°C | 6 | |
| Gain error (version B) | -1.5 | 0.03 | 1.5 | % | VSENSE = -5mV to 5mV, TA = -40°C to 125°C | 6 | |
| Gain error vs temperature | 3 | 10 | ppm/°C | TA = -40°C to 125°C | 6 | ||
| Supply voltage operating range | VS | 2.7 | 26 | V | TA = -40°C to 125°C | 6 | |
| Supply voltage operating range | VS | 2.5 | 26 | V | TA = -20°C to 85°C | 6 | |
| Quiescent current | IQ | 65 | 100 | μA | VSENSE = 0mV | 6 | |
| Quiescent current over temperature | IQ | 115 | μA | TA = -40°C to 125°C | 6 | ||
| Specified temperature range | -40 | 125 | °C | 6 | |||
| Operating temperature range | -40 | 125 | °C | 6 | |||
| Common-mode input voltage (recommended) | VCM | 12 | V | 5 | |||
| Operating supply voltage (recommended) | VS | 5 | V | Applied to V+ | 5 | ||
| Operating temperature range, natural convection (recommended) | TA | -40 | 125 | °C | Natural ventilation conditions | 5 | |
| Maximum capacitive load | 1 | nF | No sustained oscillation | 6 | |||
| Junction-to-ambient thermal resistance (DCK, SC70) | RθJA | 227.3 | °C/W | DCK (SC70) 6-pin package | 5 | ||
| Junction-to-case (top) thermal resistance (DCK, SC70) | RθJC(top) | 79.5 | °C/W | DCK (SC70) 6-pin package | 5 | ||
| Junction-to-board thermal resistance (DCK, SC70) | RθJB | 72.1 | °C/W | DCK (SC70) 6-pin package | 5 | ||
| Thermal resistance, SC70 package | θJA | 250 | °C/W | SC70 package | 7 | ||
| Gain, INA199x3 | G | 200 | V/V | INA199x3 | 6 | ||
| Gain bandwidth product | GBW | 14 | kHz | CLOAD = 10pF, INA199x3 | 6 | ||
| Slew rate | SR | 0.4 | V/μs | 6 | |||
| Voltage noise density, RTI | 25 | nV/√Hz | 6 | ||||
| Power supply rejection | PSR | 0.1 | μV/V | VS = 2.7V to 18V, VIN+ = 18V, VSENSE = 0mV | 6 | ||
| Input bias current | IB | 28 | μA | VSENSE = 0mV | 6 | ||
| Input offset current | IOS | 0.02 | μA | VSENSE = 0mV | 6 | ||
| Nonlinearity error | 0.01 | % | VSENSE = -5mV to 5mV | 6 |
CAD (KiCad official)
- Symbol:
INA199B3DCKR - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
ina199b3dckr-etched.step/ina199b3dckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina199b3dckr.step/ina199b3dckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
f48fb5be37c0cf43, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).