Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC5216-3.3YM5-TR

Microchip Tech · Pre-ordered MCUs · SOT-23-5

MIC5216-3.3YM5-TR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Supply input; the operating range is 2.5V to 12V, and the absolute maximum rating is -20V to +20V.
2 GND power_in Ground reference for the regulator.
3 EN input CMOS/TTL-compatible enable input: logic high (above 2V) enables the regulator, while logic low or open shuts it down; connect to IN if the shutdown feature is not used.
4 FLG output Open-collector error flag output that goes active low when the output is undervoltage (about 5% below nominal) and requires an external pull-up resistor to the input voltage.
5 OUT power_out Regulated output; a minimum 1µF output capacitor to GND is required to prevent oscillation.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Single Chip Microcomputer/Microcontroller
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy (variation from nominal VOUT) VO -1 1 % Variation from nominal VOUT; TJ = 25°C 4
Output Voltage Accuracy (variation from nominal VOUT) VO -2 2 % Variation from nominal VOUT; bold: -40°C < TJ < +125°C 4
Output Voltage Temperature Coefficient ∆VO/∆T 40 ppm/°C Note 2 4
Line Regulation ∆VO/VO 0.009 0.05 %/V VIN = VOUT +1V to 12V 4
Line Regulation ∆VO/VO 0.1 %/V VIN = VOUT +1V to 12V; bold: -40°C < TJ < +125°C 4
Load Regulation ∆VO/VO 0.05 0.5 % IOUT = 100µA to 150mA (Note 3) 4
Load Regulation ∆VO/VO 0.7 % IOUT = 100µA to 150mA (Note 3); bold: -40°C < TJ < +125°C 4
Dropout Voltage VIN, VO 10 60 mV IOUT = 100µA 4
Dropout Voltage VIN, VO 80 mV IOUT = 100µA; bold: -40°C < TJ < +125°C 4
Dropout Voltage VIN, VO 115 175 mV IOUT = 50mA 4
Dropout Voltage VIN, VO 250 mV IOUT = 50mA; bold: -40°C < TJ < +125°C 4
Dropout Voltage VIN, VO 165 300 mV IOUT = 150mA 4
Dropout Voltage VIN, VO 400 mV IOUT = 150mA; bold: -40°C < TJ < +125°C 4
Dropout Voltage VIN, VO 300 500 mV IOUT = 500mA 4
Dropout Voltage VIN, VO 600 mV IOUT = 500mA; bold: -40°C < TJ < +125°C 4
Ground Pin Current (per regulator) IGND 80 130 µA VEN ≥ 3.0V, IOUT = 100µA 4
Ground Pin Current (per regulator) IGND 170 µA VEN ≥ 3.0V, IOUT = 100µA; bold: -40°C < TJ < +125°C 4
Ground Pin Current (per regulator) IGND 350 650 µA VEN ≥ 3.0V, IOUT = 50mA 4
Ground Pin Current (per regulator) IGND 900 µA VEN ≥ 3.0V, IOUT = 50mA; bold: -40°C < TJ < +125°C 4
Ground Pin Current (per regulator) IGND 1.8 2.5 mA VEN ≥ 3.0V, IOUT = 150mA 4
Ground Pin Current (per regulator) IGND 3 mA VEN ≥ 3.0V, IOUT = 150mA; bold: -40°C < TJ < +125°C 4
Ground Pin Current (per regulator) IGND 8 20 mA VEN ≥ 3.0V, IOUT = 500mA 4
Ground Pin Current (per regulator) IGND 25 mA VEN ≥ 3.0V, IOUT = 500mA; bold: -40°C < TJ < +125°C 4
Quiescent Current IGND 0.05 3 µA VEN ≤ 0.4V 4
Quiescent Current IGND 0.1 8 µA VEN ≤ 0.18V 4
Ripple Rejection PSRR 75 dB Frequency = 120Hz 4
Current Limit ILIMIT 700 1000 mA VOUT = 0V 4
Enable Input Voltage (logic low, shutdown) VENL 0.4 V VEN = logic low (regulator shutdown) 5
Enable Input Voltage (logic low, shutdown) VENL 0.18 V VEN = logic low (regulator shutdown); bold: -40°C < TJ < +125°C 5
Enable Input Voltage (logic high, enabled) VENH 2 V VEN = logic high (regulator enabled) 5
Flag Threshold VERR -2 -6 -10 % Undervoltage condition (below nominal); Note 8 5
Output Logic-Low Voltage VIL 0.2 0.4 V IL = 1mA, undervoltage condition 5
Flag Leakage Current IFL -1 0.1 1 µA Flag off, VFLAG = 0V to 12V 5
Supply Input Voltage (absolute maximum) VIN -20 20 V 4
Junction Temperature (absolute maximum) TJ -40 125 °C 4
Lead Temperature (absolute maximum) 260 °C Soldering, 5 sec. 4
Supply Input Voltage (operating range) VIN 2.5 12 V 4
Enable Input Voltage (operating range) VEN 0 V Maximum is VIN 4
Junction Temperature (operating range) TJ -40 125 °C 4
Thermal Resistance, junction-to-ambient, SOT-23-5 minimum footprint θJA 220 °C/W Recommended minimum footprint (Table 1) 8
Thermal Resistance, junction-to-ambient, SOT-23-5 1 in² copper clad θJA 170 °C/W 1 inch² square copper clad (Table 1) 8
Thermal Resistance, junction-to-case, SOT-23-5 θJC 130 °C/W Table 1 8

CAD (KiCad official)

  • Symbol: MIC5216-3.3YM5-TR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: mic5216-3-3ym5-tr-etched.step / mic5216-3-3ym5-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic5216-3-3ym5-tr.step / mic5216-3-3ym5-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (13 pp, sha256 3f9486ced6f887d9, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF