Generated by kicad-footprint-generator · KiCad file format 20260206
MIC5216-3.3YM5-TR
Microchip Tech · Pre-ordered MCUs · SOT-23-5
MIC5216-3.3YM5-TR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Supply input; the operating range is 2.5V to 12V, and the absolute maximum rating is -20V to +20V. |
| 2 | GND | power_in | Ground reference for the regulator. |
| 3 | EN | input | CMOS/TTL-compatible enable input: logic high (above 2V) enables the regulator, while logic low or open shuts it down; connect to IN if the shutdown feature is not used. |
| 4 | FLG | output | Open-collector error flag output that goes active low when the output is undervoltage (about 5% below nominal) and requires an external pull-up resistor to the input voltage. |
| 5 | OUT | power_out | Regulated output; a minimum 1µF output capacitor to GND is required to prevent oscillation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy (variation from nominal VOUT) | VO | -1 | 1 | % | Variation from nominal VOUT; TJ = 25°C | 4 | |
| Output Voltage Accuracy (variation from nominal VOUT) | VO | -2 | 2 | % | Variation from nominal VOUT; bold: -40°C < TJ < +125°C | 4 | |
| Output Voltage Temperature Coefficient | ∆VO/∆T | 40 | ppm/°C | Note 2 | 4 | ||
| Line Regulation | ∆VO/VO | 0.009 | 0.05 | %/V | VIN = VOUT +1V to 12V | 4 | |
| Line Regulation | ∆VO/VO | 0.1 | %/V | VIN = VOUT +1V to 12V; bold: -40°C < TJ < +125°C | 4 | ||
| Load Regulation | ∆VO/VO | 0.05 | 0.5 | % | IOUT = 100µA to 150mA (Note 3) | 4 | |
| Load Regulation | ∆VO/VO | 0.7 | % | IOUT = 100µA to 150mA (Note 3); bold: -40°C < TJ < +125°C | 4 | ||
| Dropout Voltage | VIN, VO | 10 | 60 | mV | IOUT = 100µA | 4 | |
| Dropout Voltage | VIN, VO | 80 | mV | IOUT = 100µA; bold: -40°C < TJ < +125°C | 4 | ||
| Dropout Voltage | VIN, VO | 115 | 175 | mV | IOUT = 50mA | 4 | |
| Dropout Voltage | VIN, VO | 250 | mV | IOUT = 50mA; bold: -40°C < TJ < +125°C | 4 | ||
| Dropout Voltage | VIN, VO | 165 | 300 | mV | IOUT = 150mA | 4 | |
| Dropout Voltage | VIN, VO | 400 | mV | IOUT = 150mA; bold: -40°C < TJ < +125°C | 4 | ||
| Dropout Voltage | VIN, VO | 300 | 500 | mV | IOUT = 500mA | 4 | |
| Dropout Voltage | VIN, VO | 600 | mV | IOUT = 500mA; bold: -40°C < TJ < +125°C | 4 | ||
| Ground Pin Current (per regulator) | IGND | 80 | 130 | µA | VEN ≥ 3.0V, IOUT = 100µA | 4 | |
| Ground Pin Current (per regulator) | IGND | 170 | µA | VEN ≥ 3.0V, IOUT = 100µA; bold: -40°C < TJ < +125°C | 4 | ||
| Ground Pin Current (per regulator) | IGND | 350 | 650 | µA | VEN ≥ 3.0V, IOUT = 50mA | 4 | |
| Ground Pin Current (per regulator) | IGND | 900 | µA | VEN ≥ 3.0V, IOUT = 50mA; bold: -40°C < TJ < +125°C | 4 | ||
| Ground Pin Current (per regulator) | IGND | 1.8 | 2.5 | mA | VEN ≥ 3.0V, IOUT = 150mA | 4 | |
| Ground Pin Current (per regulator) | IGND | 3 | mA | VEN ≥ 3.0V, IOUT = 150mA; bold: -40°C < TJ < +125°C | 4 | ||
| Ground Pin Current (per regulator) | IGND | 8 | 20 | mA | VEN ≥ 3.0V, IOUT = 500mA | 4 | |
| Ground Pin Current (per regulator) | IGND | 25 | mA | VEN ≥ 3.0V, IOUT = 500mA; bold: -40°C < TJ < +125°C | 4 | ||
| Quiescent Current | IGND | 0.05 | 3 | µA | VEN ≤ 0.4V | 4 | |
| Quiescent Current | IGND | 0.1 | 8 | µA | VEN ≤ 0.18V | 4 | |
| Ripple Rejection | PSRR | 75 | dB | Frequency = 120Hz | 4 | ||
| Current Limit | ILIMIT | 700 | 1000 | mA | VOUT = 0V | 4 | |
| Enable Input Voltage (logic low, shutdown) | VENL | 0.4 | V | VEN = logic low (regulator shutdown) | 5 | ||
| Enable Input Voltage (logic low, shutdown) | VENL | 0.18 | V | VEN = logic low (regulator shutdown); bold: -40°C < TJ < +125°C | 5 | ||
| Enable Input Voltage (logic high, enabled) | VENH | 2 | V | VEN = logic high (regulator enabled) | 5 | ||
| Flag Threshold | VERR | -2 | -6 | -10 | % | Undervoltage condition (below nominal); Note 8 | 5 |
| Output Logic-Low Voltage | VIL | 0.2 | 0.4 | V | IL = 1mA, undervoltage condition | 5 | |
| Flag Leakage Current | IFL | -1 | 0.1 | 1 | µA | Flag off, VFLAG = 0V to 12V | 5 |
| Supply Input Voltage (absolute maximum) | VIN | -20 | 20 | V | 4 | ||
| Junction Temperature (absolute maximum) | TJ | -40 | 125 | °C | 4 | ||
| Lead Temperature (absolute maximum) | 260 | °C | Soldering, 5 sec. | 4 | |||
| Supply Input Voltage (operating range) | VIN | 2.5 | 12 | V | 4 | ||
| Enable Input Voltage (operating range) | VEN | 0 | V | Maximum is VIN | 4 | ||
| Junction Temperature (operating range) | TJ | -40 | 125 | °C | 4 | ||
| Thermal Resistance, junction-to-ambient, SOT-23-5 minimum footprint | θJA | 220 | °C/W | Recommended minimum footprint (Table 1) | 8 | ||
| Thermal Resistance, junction-to-ambient, SOT-23-5 1 in² copper clad | θJA | 170 | °C/W | 1 inch² square copper clad (Table 1) | 8 | ||
| Thermal Resistance, junction-to-case, SOT-23-5 | θJC | 130 | °C/W | Table 1 | 8 |
CAD (KiCad official)
- Symbol:
MIC5216-3.3YM5-TR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mic5216-3-3ym5-tr-etched.step/mic5216-3-3ym5-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5216-3-3ym5-tr.step/mic5216-3-3ym5-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (13 pp, sha256
3f9486ced6f887d9, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).