3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTL494CPWR
Texas Instruments · DC-DC Converters · TSSOP-16
TL494CPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1IN+ | input | Error amplifier 1 non-inverting input; common-mode voltage range -0.3V to VCC-2V. |
| 2 | 1IN- | input | Error amplifier 1 inverting input; common-mode voltage range -0.3V to VCC-2V. |
| 3 | FEEDBACK | input | PWM feedback input for pulse-width modulation control with input threshold voltage 3.4V at zero duty cycle. |
| 4 | DTC | input | Dead-time control comparator input that adjusts minimum dead time from 3% (0V input) to 100% (3.3V input). |
| 5 | CT | passive | External oscillator timing capacitor terminal (range 0.47nF to 10000nF) for frequency setting in conjunction with RT. |
| 6 | RT | passive | External oscillator timing resistor terminal (range 1.8kΩ to 500kΩ) for frequency setting in conjunction with CT. |
| 7 | GND | power_in | Ground reference connection to negative power supply. |
| 8 | C1 | output | MOSFET output 1 collector/drain terminal with open-drain structure capable of 200mA source/sink current. |
| 9 | E1 | output | MOSFET output 1 emitter/source terminal with open-drain structure capable of 200mA source/sink current. |
| 10 | E2 | output | MOSFET output 2 emitter/source terminal with open-drain structure capable of 200mA source/sink current. |
| 11 | C2 | output | MOSFET output 2 collector/drain terminal with open-drain structure capable of 200mA source/sink current. |
| 12 | VCC | power_in | Positive power supply input with recommended operating range 7V to 40V and absolute maximum rating of 41V. |
| 13 | OUTPUT CTRL | input | Output control input that selects single-ended/parallel mode (connect to GND) or push-pull mode (connect to REF). |
| 14 | REF | output | Internal 5V reference voltage regulator output with ±5% tolerance providing 10mA load current capacity and short-circuit protection. |
| 15 | 2IN- | input | Error amplifier 2 inverting input; common-mode voltage range -0.3V to VCC-2V. |
| 16 | 2IN+ | input | Error amplifier 2 non-inverting input; common-mode voltage range -0.3V to VCC-2V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Power Management (PMIC) |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 41 | V | 4 | |||
| Collector output voltage | VO | 41 | V | 4 | |||
| Collector output current | IO | 250 | mA | 4 | |||
| Lead temperature | 260 | °C | 10 s, 1.6 mm (1/16 in) from case | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC | 7 | 40 | V | 4 | ||
| Amplifier input voltage | VI | -0.3 | V | max printed as VCC - 2 V | 4 | ||
| Collector output voltage | VO | 40 | V | 4 | |||
| Collector output current (each transistor) | 200 | mA | 4 | ||||
| Current into FEEDBACK terminal | 0.3 | mA | 4 | ||||
| Oscillator frequency | fOSC | 1 | 300 | kHz | 4 | ||
| Timing capacitor | CT | 0.47 | 10000 | nF | 4 | ||
| Timing resistor | RT | 1.8 | 500 | kΩ | 4 | ||
| Operating free-air temperature (TL494C) | TA | 0 | 70 | °C | natural ventilation | 4 | |
| Output voltage (REF) | 4.75 | 5 | 5.25 | V | IO = 1mA | 5 | |
| Input regulation | 2 | 25 | mV | VCC = 7V to 40V | 5 | ||
| Output regulation | 6 | 15 | mV | IO = 1mA to 10mA | 5 | ||
| Output voltage change with temperature | 2 | 10 | mV/V | ΔTA = min to max | 5 | ||
| Frequency change with temperature | 50 | Hz/kHz | ΔTA = min to max; timing C and R temperature coefficients not considered | 5 | |||
| Input offset voltage | 2 | 10 | mV | VO (FEEDBACK) = 2.5V | 5 | ||
| Input offset current | 25 | 250 | nA | VO (FEEDBACK) = 2.5V | 5 | ||
| Input bias current | 0.2 | 1 | µA | VO (FEEDBACK) = 2.5V | 5 | ||
| Open-loop voltage amplification | 70 | 80 | dB | ΔVO = 3V, VO = 0.5V to 3.5V, RL = 2kΩ | 5 | ||
| Common-mode rejection ratio | 65 | 100 | dB | ΔVO = 40V, TA = 25°C | 5 | ||
| Output sink current (FEEDBACK) | 0.3 | 0.7 | mA | VID = -15mV to -5V, VO (FEEDBACK) = 0.7V | 5 | ||
| Output source current (FEEDBACK) | -2 | mA | VID = 15mV to 5V, VO (FEEDBACK) = 3.5V | 6 | |||
| C1, C2 off-state current | 4 | 100 | µA | VCE = 40V, VCC = 40V | 7 | ||
| E1, E2 off-state current | -100 | µA | VCC = VC = 40V, VE = 0 | 7 | |||
| C1E1, C2E2 saturation voltage, common source | 0.5 | 1.3 | V | VE = 0, IC = 200mA | 7 | ||
| C1E1, C2E2 saturation voltage, source follower | 1.65 | 2.5 | V | VO(C1/C2) = 15V, IE = -200mA | 7 | ||
| Input bias current (DEAD-TIME CTRL) | -0.006 | -10 | µA | VI = 0 to 5.25V | 7 | ||
| Maximum duty cycle, each output | 45 | % | VI (DEAD-TIME CTRL) = 0, CT = 0.01µF, RT = 12kΩ | 7 | |||
| Input threshold voltage (DEAD-TIME CTRL), zero duty cycle | 2.5 | 3.3 | V | zero duty cycle | 7 | ||
| Input threshold voltage (FEEDBACK), zero duty cycle | 3.4 | 4.5 | V | zero duty cycle | 7 | ||
| Input sink current (FEEDBACK) | 0.3 | 0.7 | mA | V (FEEDBACK) = 0.7V | 7 | ||
| Standby supply current (VCC = 15V) | 1.62 | 10 | mA | RT = Vref, all other inputs and outputs open, VCC = 15V | 7 | ||
| Standby supply current (VCC = 40V) | 1.68 | 15 | mA | RT = Vref, all other inputs and outputs open, VCC = 40V | 7 | ||
| Rise time, common source | 70 | 200 | ns | common source configuration, see Figure 6-3 | 7 | ||
| Fall time, common source | 20 | 100 | ns | common source configuration, see Figure 6-3 | 7 | ||
| Rise time, source follower | 85 | 200 | ns | source follower configuration, see Figure 6-4 | 8 | ||
| Fall time, source follower | 35 | 100 | ns | source follower configuration, see Figure 6-4 | 8 | ||
| Junction-to-ambient thermal resistance (PW, TSSOP-16) | RθJA | 114 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (PW, TSSOP-16) | RθJC(top) | 53.2 | °C/W | 4 | |||
| Junction-to-board thermal resistance (PW, TSSOP-16) | RθJB | 71.8 | °C/W | 4 | |||
| Junction-to-top characterization parameter (PW, TSSOP-16) | ψJT | 7.3 | °C/W | 4 | |||
| Junction-to-board characterization parameter (PW, TSSOP-16) | ψJB | 71.2 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
TL494CPWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
tl494cpwr-etched.step/tl494cpwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl494cpwr.step/tl494cpwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
ac73d955803db8d7, retrieved 2026-09-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).