main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tl494cpwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tl494cpwr: viewers · Ray
package.json tl494cpwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tl494cpwr: specified limits as data (metadata.characteristics, 46 rows from the datasheet) · Ray
README.md tl494cpwr: specified limits as data (metadata.characteristics, 46 rows from the datasheet) · Ray
tl494cpwr-etched.fit.json tl494cpwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tl494cpwr-etched.glb tl494cpwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tl494cpwr-etched.step tl494cpwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tl494cpwr.glb Publish 0.1.0 · Ray
tl494cpwr.kicad_mod Publish 0.1.0 · Ray
tl494cpwr.kicad_sym Publish 0.1.0 · Ray
tl494cpwr.lbr Publish 0.1.0 · Ray
tl494cpwr.step Publish 0.1.0 · Ray

TL494CPWR

Texas Instruments · DC-DC Converters · TSSOP-16

TL494CPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1IN+ input Error amplifier 1 non-inverting input; common-mode voltage range -0.3V to VCC-2V.
2 1IN- input Error amplifier 1 inverting input; common-mode voltage range -0.3V to VCC-2V.
3 FEEDBACK input PWM feedback input for pulse-width modulation control with input threshold voltage 3.4V at zero duty cycle.
4 DTC input Dead-time control comparator input that adjusts minimum dead time from 3% (0V input) to 100% (3.3V input).
5 CT passive External oscillator timing capacitor terminal (range 0.47nF to 10000nF) for frequency setting in conjunction with RT.
6 RT passive External oscillator timing resistor terminal (range 1.8kΩ to 500kΩ) for frequency setting in conjunction with CT.
7 GND power_in Ground reference connection to negative power supply.
8 C1 output MOSFET output 1 collector/drain terminal with open-drain structure capable of 200mA source/sink current.
9 E1 output MOSFET output 1 emitter/source terminal with open-drain structure capable of 200mA source/sink current.
10 E2 output MOSFET output 2 emitter/source terminal with open-drain structure capable of 200mA source/sink current.
11 C2 output MOSFET output 2 collector/drain terminal with open-drain structure capable of 200mA source/sink current.
12 VCC power_in Positive power supply input with recommended operating range 7V to 40V and absolute maximum rating of 41V.
13 OUTPUT CTRL input Output control input that selects single-ended/parallel mode (connect to GND) or push-pull mode (connect to REF).
14 REF output Internal 5V reference voltage regulator output with ±5% tolerance providing 10mA load current capacity and short-circuit protection.
15 2IN- input Error amplifier 2 inverting input; common-mode voltage range -0.3V to VCC-2V.
16 2IN+ input Error amplifier 2 non-inverting input; common-mode voltage range -0.3V to VCC-2V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-16
Category Power Management (PMIC)
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 41 V 4
Collector output voltage VO 41 V 4
Collector output current IO 250 mA 4
Lead temperature 260 °C 10 s, 1.6 mm (1/16 in) from case 4
Storage temperature range Tstg -65 150 °C 4
Supply voltage VCC 7 40 V 4
Amplifier input voltage VI -0.3 V max printed as VCC - 2 V 4
Collector output voltage VO 40 V 4
Collector output current (each transistor) 200 mA 4
Current into FEEDBACK terminal 0.3 mA 4
Oscillator frequency fOSC 1 300 kHz 4
Timing capacitor CT 0.47 10000 nF 4
Timing resistor RT 1.8 500 kΩ 4
Operating free-air temperature (TL494C) TA 0 70 °C natural ventilation 4
Output voltage (REF) 4.75 5 5.25 V IO = 1mA 5
Input regulation 2 25 mV VCC = 7V to 40V 5
Output regulation 6 15 mV IO = 1mA to 10mA 5
Output voltage change with temperature 2 10 mV/V ΔTA = min to max 5
Frequency change with temperature 50 Hz/kHz ΔTA = min to max; timing C and R temperature coefficients not considered 5
Input offset voltage 2 10 mV VO (FEEDBACK) = 2.5V 5
Input offset current 25 250 nA VO (FEEDBACK) = 2.5V 5
Input bias current 0.2 1 µA VO (FEEDBACK) = 2.5V 5
Open-loop voltage amplification 70 80 dB ΔVO = 3V, VO = 0.5V to 3.5V, RL = 2kΩ 5
Common-mode rejection ratio 65 100 dB ΔVO = 40V, TA = 25°C 5
Output sink current (FEEDBACK) 0.3 0.7 mA VID = -15mV to -5V, VO (FEEDBACK) = 0.7V 5
Output source current (FEEDBACK) -2 mA VID = 15mV to 5V, VO (FEEDBACK) = 3.5V 6
C1, C2 off-state current 4 100 µA VCE = 40V, VCC = 40V 7
E1, E2 off-state current -100 µA VCC = VC = 40V, VE = 0 7
C1E1, C2E2 saturation voltage, common source 0.5 1.3 V VE = 0, IC = 200mA 7
C1E1, C2E2 saturation voltage, source follower 1.65 2.5 V VO(C1/C2) = 15V, IE = -200mA 7
Input bias current (DEAD-TIME CTRL) -0.006 -10 µA VI = 0 to 5.25V 7
Maximum duty cycle, each output 45 % VI (DEAD-TIME CTRL) = 0, CT = 0.01µF, RT = 12kΩ 7
Input threshold voltage (DEAD-TIME CTRL), zero duty cycle 2.5 3.3 V zero duty cycle 7
Input threshold voltage (FEEDBACK), zero duty cycle 3.4 4.5 V zero duty cycle 7
Input sink current (FEEDBACK) 0.3 0.7 mA V (FEEDBACK) = 0.7V 7
Standby supply current (VCC = 15V) 1.62 10 mA RT = Vref, all other inputs and outputs open, VCC = 15V 7
Standby supply current (VCC = 40V) 1.68 15 mA RT = Vref, all other inputs and outputs open, VCC = 40V 7
Rise time, common source 70 200 ns common source configuration, see Figure 6-3 7
Fall time, common source 20 100 ns common source configuration, see Figure 6-3 7
Rise time, source follower 85 200 ns source follower configuration, see Figure 6-4 8
Fall time, source follower 35 100 ns source follower configuration, see Figure 6-4 8
Junction-to-ambient thermal resistance (PW, TSSOP-16) RθJA 114 °C/W 4
Junction-to-case (top) thermal resistance (PW, TSSOP-16) RθJC(top) 53.2 °C/W 4
Junction-to-board thermal resistance (PW, TSSOP-16) RθJB 71.8 °C/W 4
Junction-to-top characterization parameter (PW, TSSOP-16) ψJT 7.3 °C/W 4
Junction-to-board characterization parameter (PW, TSSOP-16) ψJB 71.2 °C/W 4

CAD (KiCad official)

  • Symbol: TL494CPWR
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: tl494cpwr-etched.step / tl494cpwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl494cpwr.step / tl494cpwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 ac73d955803db8d7, retrieved 2026-09-26, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF