component
LM5001IDRQ1
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM5001IDRQ1
Texas Instruments · DC-DC Converters · SOIC-8
LM5001IDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Drain terminal of the internal 75-V N-Channel MOSFET power switch |
| 2 | VIN | power_in | Power supply input pin with nominal operating range 3.1 V to 75 V |
| 3 | VCC | power_out | Bias regulator output regulated to 6.85 V typical when VIN > 6.9 V, otherwise approximately equal to VIN; requires 0.47-µF or greater ceramic decoupling capacitor |
| 4 | GND | power_in | Ground reference for regulator control functions and power MOSFET current sense |
| 5 | RT | input | Oscillator frequency programming pin using resistor to GND for 50 kHz to 1.5 MHz operation, accepts 100-pF coupled external clock synchronization pulses |
| 6 | FB | input | Feedback input to error amplifier inverting input for regulated output voltage control, referenced to internal 1.26-V reference |
| 7 | COMP | tri_state | Open drain output of error amplifier with internal 5-kΩ pull-up resistor for loop compensation network connection between COMP and FB pins |
| 8 | EN | input | Enable/Undervoltage Lock-Out/Shutdown input; below 0.45 V = shutdown mode (95-130 µA), 0.45-1.26 V = standby, above 1.26 V = enabled; pulled high by internal 6-µA current source when unconnected |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LM5001IDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lm5001idrq1-etched.step/lm5001idrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5001idrq1.step/lm5001idrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
508ee28768a531b1, retrieved 2026-10-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).