Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents

README

markdown

L7815ABV-DG

STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-220

L7815ABV-DG from STMicroelectronics, in a TO-220. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INPUT power_in Unregulated positive DC input (VI). For a 15 V output the recommended input range is typically ~17.5 to 30 V (dropout ~2 V at 1 A, absolute max VI = 35 V for VO = 5-18 V). Bypass to GND with a small ceramic capacitor (~0.33 uF) placed close to the pin to suppress oscillation, especially when the raw supply is more than a few cm from the regulator.
2 GND power_in Common ground for both the input and output rails and reference for the internal error amplifier. Electrically bonded to the DPAK exposed back tab, which is the primary heat-conduction path to the PCB copper pour.
3 OUTPUT power_out Regulated +15 V DC output (VO). Guaranteed 14.4-15.6 V over line, load and temperature (2% A-grade spec) with up to 1.5 A load current when the package is adequately heatsinked. A ~0.1 uF ceramic to GND close to the pin is recommended for transient response; larger bulk capacitance improves load-step behavior.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TO-220
Category PMIC
Pins 3

Ordering variants

  • L7815ABV-DG
  • L7815ABV-DGL7815ABD2T-TR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage VO 14.7 15 15.3 V TJ = 25 °C 11
Output voltage VO 14.4 15 15.6 V IO = 5 mA to 1 A, VI = 17.9 to 28 V 11
Line regulation ∆VO 13 150 mV VI = 17.9 to 30 V, IO = 500 mA, TJ = 25 °C 11
Line regulation ∆VO 16 150 mV VI = 20 to 26 V 11
Line regulation ∆VO 6 75 mV VI = 20 to 26 V, TJ = 25 °C 11
Load regulation ∆VO 25 100 mV IO = 5 mA to 1 A 11
Load regulation ∆VO 30 100 mV IO = 5 mA to 1.5 A, TJ = 25 °C 11
Load regulation ∆VO 10 50 mV IO = 250 to 750 mA 11
Quiescent current Iq 4.4 6 mA TJ = 25 °C 11
Quiescent current Iq 6 mA 11
Quiescent current change ∆Iq 0.8 mA VI = 17.5 to 30 V, IO = 500 mA 11
Quiescent current change ∆Iq 0.5 mA IO = 5 mA to 1 A 11
Supply voltage rejection SVR 58 dB VI = 18.5 to 28.5 V, f = 120 Hz, IO = 500 mA 11
Dropout voltage Vd 2 V IO = 1 A, TJ = 25 °C 11
Output noise voltage eN 10 µV/VO TA = 25 °C, B = 10 Hz to 100 kHz 11
Output resistance RO 19 mΩ f = 1 kHz 11
Short circuit current Isc 0.2 A VI = 35 V, TA = 25 °C 11
Short circuit peak current Iscp 2.2 A TJ = 25 °C 11
Output voltage drift ∆VO/∆T -1 mV/°C 11
Input voltage DC (VO = 5 to 18 V range, applies to 15 V output) VI 35 V for VO = 5 to 18 V 4
Storage temperature range TSTG -65 150 °C 4
Operating junction temperature range TOP -40 125 °C for L78xxAB 4
Thermal resistance junction-case (TO-220) RthJC 5 °C/W TO-220 package 4
Thermal resistance junction-ambient (TO-220) RthJA 50 °C/W TO-220 package 4

CAD (KiCad official)

  • Symbol: L7815ABV-DG
  • Footprint: Package_TO_SOT_THT:TO-220-3_Vertical
  • 3D model: TO-220 (KiCad packages3D, STEP)
  • 3D model files: l7815abv-dg-etched.step / l7815abv-dg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); l7815abv-dg.step / l7815abv-dg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (None pp, sha256 f7b390b5c05e0aba, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF