3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownL7815ABV-DG
STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-220
L7815ABV-DG from STMicroelectronics, in a TO-220. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INPUT | power_in | Unregulated positive DC input (VI). For a 15 V output the recommended input range is typically ~17.5 to 30 V (dropout ~2 V at 1 A, absolute max VI = 35 V for VO = 5-18 V). Bypass to GND with a small ceramic capacitor (~0.33 uF) placed close to the pin to suppress oscillation, especially when the raw supply is more than a few cm from the regulator. |
| 2 | GND | power_in | Common ground for both the input and output rails and reference for the internal error amplifier. Electrically bonded to the DPAK exposed back tab, which is the primary heat-conduction path to the PCB copper pour. |
| 3 | OUTPUT | power_out | Regulated +15 V DC output (VO). Guaranteed 14.4-15.6 V over line, load and temperature (2% A-grade spec) with up to 1.5 A load current when the package is adequately heatsinked. A ~0.1 uF ceramic to GND close to the pin is recommended for transient response; larger bulk capacitance improves load-step behavior. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TO-220 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
L7815ABV-DGL7815ABV-DGL7815ABD2T-TR
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VO | 14.7 | 15 | 15.3 | V | TJ = 25 °C | 11 |
| Output voltage | VO | 14.4 | 15 | 15.6 | V | IO = 5 mA to 1 A, VI = 17.9 to 28 V | 11 |
| Line regulation | ∆VO | 13 | 150 | mV | VI = 17.9 to 30 V, IO = 500 mA, TJ = 25 °C | 11 | |
| Line regulation | ∆VO | 16 | 150 | mV | VI = 20 to 26 V | 11 | |
| Line regulation | ∆VO | 6 | 75 | mV | VI = 20 to 26 V, TJ = 25 °C | 11 | |
| Load regulation | ∆VO | 25 | 100 | mV | IO = 5 mA to 1 A | 11 | |
| Load regulation | ∆VO | 30 | 100 | mV | IO = 5 mA to 1.5 A, TJ = 25 °C | 11 | |
| Load regulation | ∆VO | 10 | 50 | mV | IO = 250 to 750 mA | 11 | |
| Quiescent current | Iq | 4.4 | 6 | mA | TJ = 25 °C | 11 | |
| Quiescent current | Iq | 6 | mA | 11 | |||
| Quiescent current change | ∆Iq | 0.8 | mA | VI = 17.5 to 30 V, IO = 500 mA | 11 | ||
| Quiescent current change | ∆Iq | 0.5 | mA | IO = 5 mA to 1 A | 11 | ||
| Supply voltage rejection | SVR | 58 | dB | VI = 18.5 to 28.5 V, f = 120 Hz, IO = 500 mA | 11 | ||
| Dropout voltage | Vd | 2 | V | IO = 1 A, TJ = 25 °C | 11 | ||
| Output noise voltage | eN | 10 | µV/VO | TA = 25 °C, B = 10 Hz to 100 kHz | 11 | ||
| Output resistance | RO | 19 | mΩ | f = 1 kHz | 11 | ||
| Short circuit current | Isc | 0.2 | A | VI = 35 V, TA = 25 °C | 11 | ||
| Short circuit peak current | Iscp | 2.2 | A | TJ = 25 °C | 11 | ||
| Output voltage drift | ∆VO/∆T | -1 | mV/°C | 11 | |||
| Input voltage DC (VO = 5 to 18 V range, applies to 15 V output) | VI | 35 | V | for VO = 5 to 18 V | 4 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 4 | ||
| Operating junction temperature range | TOP | -40 | 125 | °C | for L78xxAB | 4 | |
| Thermal resistance junction-case (TO-220) | RthJC | 5 | °C/W | TO-220 package | 4 | ||
| Thermal resistance junction-ambient (TO-220) | RthJA | 50 | °C/W | TO-220 package | 4 |
CAD (KiCad official)
- Symbol:
L7815ABV-DG - Footprint:
Package_TO_SOT_THT:TO-220-3_Vertical - 3D model: TO-220 (KiCad packages3D, STEP)
- 3D model files:
l7815abv-dg-etched.step/l7815abv-dg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l7815abv-dg.step/l7815abv-dg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (None pp, sha256
f7b390b5c05e0aba, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.