Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MMUN2112LT1G

onsemi · Digital Transistors · SOT-23

MMUN2112LT1G from onsemi, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 BASE input Base is the input pin of the bias resistor transistor and connects to the internal 22 kΩ series base resistor R1, with input forward voltage up to 40 Vdc and input reverse voltage up to 10 Vdc.
2 EMITTER power_in Emitter is labeled GROUND in the datasheet and is the common return, with the internal 22 kΩ base-emitter resistor R2 connected between base and emitter.
3 COLLECTOR output Collector is the output pin, rated for 100 mAdc continuous collector current with 50 Vdc collector-base and collector-emitter voltage maximum.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOT-23
Category Transistors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Collector-Base Cutoff Current ICBO 100 nAdc (VCB = 50 V, IE = 0) 4
Collector-Emitter Cutoff Current ICEO 500 nAdc (VCE = 50 V, IB = 0) 4
Emitter-Base Cutoff Current IEBO 0.2 mAdc (VEB = 6.0 V, IC = 0) 4
Collector-Base Breakdown Voltage V(BR)CBO 50 Vdc (IC = 10 A, IE = 0) 4
Collector-Emitter Breakdown Voltage V(BR)CEO 50 Vdc (IC = 2.0 mA, IB = 0) 4
DC Current Gain hFE 60 100 (IC = 5.0 mA, VCE = 10 V) 4
Collector-Emitter Saturation Voltage VCE(sat) 0.25 Vdc (IC = 10 mA, IB = 0.3 mA) 4
Input Voltage (off) Vi(off) 1.2 0.8 Vdc (VCE = 5.0 V, IC = 100 A) 4
Input Voltage (on) Vi(on) 2.5 1.7 Vdc (VCE = 0.3 V, IC = 5.0 mA) 4
Output Voltage (on) VOL 0.2 Vdc (VCC = 5.0 V, VB = 2.5 V, RL = 1.0 k) 4
Output Voltage (off) VOH 4.9 Vdc (VCC = 5.0 V, VB = 0.5 V, RL = 1.0 k) 4
Input Resistor R1 R1 15.4 22 28.6 k 4
Resistor Ratio R1/R2 R1/R2 0.8 1 1.2 4
Maximum Collector-Base Voltage VCBO 50 Vdc 1
Maximum Collector-Emitter Voltage VCEO 50 Vdc 1
Maximum Collector Current - Continuous IC 100 mAdc 1
Maximum Input Forward Voltage VIN(fwd) 40 Vdc 1
Maximum Input Reverse Voltage VIN(rev) 10 Vdc 1
Total Device Dissipation PD 246 mW TA = 25°C, FR-4 @ Minimum Pad (Note 1) 3
Total Device Dissipation PD 400 mW TA = 25°C, FR-4 @ 1.0 x 1.0 Inch Pad (Note 2) 3
Derate above 25°C PD 2 mW/°C FR-4 @ Minimum Pad (Note 1) 3
Derate above 25°C PD 3.2 mW/°C FR-4 @ 1.0 x 1.0 Inch Pad (Note 2) 3
Thermal Resistance, Junction to Ambient RJA 508 °C/W FR-4 @ Minimum Pad (Note 1) 3
Thermal Resistance, Junction to Ambient RJA 311 °C/W FR-4 @ 1.0 x 1.0 Inch Pad (Note 2) 3
Thermal Resistance, Junction to Lead RJL 174 °C/W FR-4 @ Minimum Pad (Note 1) 3
Thermal Resistance, Junction to Lead RJL 208 °C/W FR-4 @ 1.0 x 1.0 Inch Pad (Note 2) 3
Junction and Storage Temperature Range TJ, Tstg -55 150 °C 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: MMUN2112LT1G
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: mmun2112lt1g-etched.step / mmun2112lt1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mmun2112lt1g.step / mmun2112lt1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (12 pp, sha256 81ca7ad515ed4b36, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF