Generated by kicad-footprint-generator · KiCad file format 20260206
MMUN2112LT1G
onsemi · Digital Transistors · SOT-23
MMUN2112LT1G from onsemi, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BASE | input | Base is the input pin of the bias resistor transistor and connects to the internal 22 kΩ series base resistor R1, with input forward voltage up to 40 Vdc and input reverse voltage up to 10 Vdc. |
| 2 | EMITTER | power_in | Emitter is labeled GROUND in the datasheet and is the common return, with the internal 22 kΩ base-emitter resistor R2 connected between base and emitter. |
| 3 | COLLECTOR | output | Collector is the output pin, rated for 100 mAdc continuous collector current with 50 Vdc collector-base and collector-emitter voltage maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23 |
| Category | Transistors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Base Cutoff Current | ICBO | 100 | nAdc | (VCB = 50 V, IE = 0) | 4 | ||
| Collector-Emitter Cutoff Current | ICEO | 500 | nAdc | (VCE = 50 V, IB = 0) | 4 | ||
| Emitter-Base Cutoff Current | IEBO | 0.2 | mAdc | (VEB = 6.0 V, IC = 0) | 4 | ||
| Collector-Base Breakdown Voltage | V(BR)CBO | 50 | Vdc | (IC = 10 A, IE = 0) | 4 | ||
| Collector-Emitter Breakdown Voltage | V(BR)CEO | 50 | Vdc | (IC = 2.0 mA, IB = 0) | 4 | ||
| DC Current Gain | hFE | 60 | 100 | (IC = 5.0 mA, VCE = 10 V) | 4 | ||
| Collector-Emitter Saturation Voltage | VCE(sat) | 0.25 | Vdc | (IC = 10 mA, IB = 0.3 mA) | 4 | ||
| Input Voltage (off) | Vi(off) | 1.2 | 0.8 | Vdc | (VCE = 5.0 V, IC = 100 A) | 4 | |
| Input Voltage (on) | Vi(on) | 2.5 | 1.7 | Vdc | (VCE = 0.3 V, IC = 5.0 mA) | 4 | |
| Output Voltage (on) | VOL | 0.2 | Vdc | (VCC = 5.0 V, VB = 2.5 V, RL = 1.0 k) | 4 | ||
| Output Voltage (off) | VOH | 4.9 | Vdc | (VCC = 5.0 V, VB = 0.5 V, RL = 1.0 k) | 4 | ||
| Input Resistor R1 | R1 | 15.4 | 22 | 28.6 | k | 4 | |
| Resistor Ratio R1/R2 | R1/R2 | 0.8 | 1 | 1.2 | 4 | ||
| Maximum Collector-Base Voltage | VCBO | 50 | Vdc | 1 | |||
| Maximum Collector-Emitter Voltage | VCEO | 50 | Vdc | 1 | |||
| Maximum Collector Current - Continuous | IC | 100 | mAdc | 1 | |||
| Maximum Input Forward Voltage | VIN(fwd) | 40 | Vdc | 1 | |||
| Maximum Input Reverse Voltage | VIN(rev) | 10 | Vdc | 1 | |||
| Total Device Dissipation | PD | 246 | mW | TA = 25°C, FR-4 @ Minimum Pad (Note 1) | 3 | ||
| Total Device Dissipation | PD | 400 | mW | TA = 25°C, FR-4 @ 1.0 x 1.0 Inch Pad (Note 2) | 3 | ||
| Derate above 25°C | PD | 2 | mW/°C | FR-4 @ Minimum Pad (Note 1) | 3 | ||
| Derate above 25°C | PD | 3.2 | mW/°C | FR-4 @ 1.0 x 1.0 Inch Pad (Note 2) | 3 | ||
| Thermal Resistance, Junction to Ambient | RJA | 508 | °C/W | FR-4 @ Minimum Pad (Note 1) | 3 | ||
| Thermal Resistance, Junction to Ambient | RJA | 311 | °C/W | FR-4 @ 1.0 x 1.0 Inch Pad (Note 2) | 3 | ||
| Thermal Resistance, Junction to Lead | RJL | 174 | °C/W | FR-4 @ Minimum Pad (Note 1) | 3 | ||
| Thermal Resistance, Junction to Lead | RJL | 208 | °C/W | FR-4 @ 1.0 x 1.0 Inch Pad (Note 2) | 3 | ||
| Junction and Storage Temperature Range | TJ, Tstg | -55 | 150 | °C | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
MMUN2112LT1G - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
mmun2112lt1g-etched.step/mmun2112lt1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mmun2112lt1g.step/mmun2112lt1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (12 pp, sha256
81ca7ad515ed4b36, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).