3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT1055CN8#PBF
Analog Devices · FET InputAmplifiers · PDIP-8
LT1055CN8#PBF from Analog Devices, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BAL | passive | Offset null terminal; a 100k potentiometer between BAL pins 1 and 5 with the wiper tied to V+ gives an offset adjustment range of ±5 mV. |
| 2 | -IN | input | Inverting input; the input voltage range is ±11 V minimum (±12 V typical) at ±15 V supplies and the absolute maximum input voltage is ±20 V. |
| 3 | +IN | input | Non-inverting input; the input voltage range is ±11 V minimum (±12 V typical) at ±15 V supplies and the absolute maximum input voltage is ±20 V. |
| 4 | V- | power_in | Negative supply; the absolute maximum supply voltage is ±20 V and PSRR is specified for VS = ±10 V to ±18 V. |
| 5 | BAL | passive | Second offset null terminal, used together with pin 1 in the 100k potentiometer trim network whose wiper is tied to V+. |
| 6 | OUT | output | Amplifier output; output voltage swing is ±12 V minimum into RL = 2 kΩ and the output short-circuit duration is indefinite. |
| 7 | V+ | power_in | Positive supply; the absolute maximum supply voltage is ±20 V and this pin is the wiper tie point for the offset null potentiometer. |
| 8 | N/C | unconnected | No internal connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | PDIP-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage, LT1055 N8 package | VOS | 70 | 120 | µV | TA=25°C, VS=±15V, VCM=0V; Note 2 (warmed up) | 3 | |
| Input Offset Voltage, LT1056 N8 package | VOS | 70 | 140 | µV | TA=25°C, VS=±15V, VCM=0V; Note 2 (warmed up) | 3 | |
| Input Offset Current | IOS | 2 | 20 | pA | Fully warmed up | 3 | |
| Input Bias Current | IB | -50 | 10 | 50 | pA | Fully warmed up; printed as ±10 typ, ±50 max | 3 |
| Input Bias Current | IB | 30 | 150 | pA | VCM = 10V | 3 | |
| Large-Signal Voltage Gain | AVOL | 120 | 400 | V/mV | VO = ±10V, RL = 2k | 3 | |
| Large-Signal Voltage Gain | AVOL | 100 | 300 | V/mV | VO = ±10V, RL = 1k | 3 | |
| Input Voltage Range | VCM | -11 | 12 | 11 | V | Printed as ±11 min, ±12 typ | 3 |
| Common Mode Rejection Ratio | CMRR | 83 | 98 | dB | VCM = ±11V | 3 | |
| Power Supply Rejection Ratio | PSRR | 88 | 104 | dB | VS = ±10V to ±18V | 3 | |
| Output Voltage Swing | VOUT | 12 | 13.2 | V | RL = 2k; printed as ±12 min, ±13.2 typ | 3 | |
| Slew Rate, LT1055 | SR | 7.5 | 12 | V/µs | LT1055 (AV = 1 test conditions not printed in table) | 3 | |
| Slew Rate, LT1056 | SR | 9 | 14 | V/µs | LT1056 | 3 | |
| Gain Bandwidth Product, LT1055 | GBW | 4.5 | MHz | f = 1MHz | 3 | ||
| Gain Bandwidth Product, LT1056 | GBW | 5.5 | MHz | f = 1MHz | 3 | ||
| Supply Current, LT1055 | IS | 2.8 | 5 | mA | LT1055 | 3 | |
| Supply Current, LT1056 | IS | 4 | 7 | mA | LT1056 | 3 | |
| Offset Voltage Adjustment Range | -5 | 5 | mV | RPOT = 100k | 3 | ||
| Input Capacitance | CIN | 4 | pF | 3 | |||
| Input Noise Voltage Density, LT1055/LT1056 | en | 30 | 60 | nV/√Hz | fO = 10Hz (Note 3) | 3 | |
| Input Noise Voltage Density, LT1055/LT1056 | en | 15 | 22 | nV/√Hz | fO = 1kHz (Note 4) | 3 | |
| Input Noise Current Density | in | 1.8 | 4 | fA/√Hz | fO = 10Hz, 1kHz (Note 5) | 3 | |
| Input Offset Current, TA = 70°C, LT1055 | IOS | 16 | 80 | pA | Warmed up, TA = 70°C, 0°C to 70°C range | 4 | |
| Input Offset Current, TA = 70°C, LT1056 | IOS | 18 | 100 | pA | Warmed up, TA = 70°C, 0°C to 70°C range | 4 | |
| Input Bias Current, TA = 70°C, LT1055 | IB | -200 | 40 | 200 | pA | Warmed up, TA = 70°C, 0°C to 70°C range; printed ±40 typ, ±200 max | 4 |
| Input Bias Current, TA = 70°C, LT1056 | IB | -240 | 50 | 240 | pA | Warmed up, TA = 70°C, 0°C to 70°C range; printed ±50 typ, ±240 max | 4 |
| Large-Signal Voltage Gain, 0°C to 70°C | AVOL | 60 | 250 | V/mV | VO = ±10V, RL = 2k, 0°C ≤ TA ≤ 70°C | 4 | |
| Common Mode Rejection Ratio, 0°C to 70°C | CMRR | 82 | 98 | dB | VCM = ±10.5V, 0°C ≤ TA ≤ 70°C | 4 | |
| Power Supply Rejection Ratio, 0°C to 70°C | PSRR | 87 | 103 | dB | VS = ±10V to ±18V, 0°C ≤ TA ≤ 70°C | 4 | |
| Output Voltage Swing, 0°C to 70°C | VOUT | 12 | 13.1 | V | RL = 2k, 0°C ≤ TA ≤ 70°C; printed as ±12 min, ±13.1 typ | 4 | |
| Average Temperature Coefficient of Input Offset Voltage, N8 | 8 | 12 | µV/°C | N8 package, 0°C ≤ TA ≤ 70°C (Note 6) | 4 | ||
| Supply Voltage (absolute maximum) | V+ / V- | -20 | 20 | V | Supply voltage | 2 | |
| Differential Input Voltage (absolute maximum) | -40 | 40 | V | 2 | |||
| Input Voltage (absolute maximum) | -20 | 20 | V | 2 | |||
| Operating Temperature Range, LT1055CN8/LT1056CN8 | TA | 0 | 70 | °C | LT1055AC/LT1055C/LT1056AC/LT1056C grade | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | All devices | 2 | |
| Lead Temperature (Soldering, 10 sec) | 300 | °C | 10 seconds | 2 | |||
| Maximum Junction Temperature | TJMAX | 150 | °C | N8 package | 2 | ||
| Thermal Resistance, Junction-to-Ambient | θJA | 130 | °C/W | N8 8-lead PDIP | 2 |
CAD (KiCad official)
- Symbol:
LT1055CN8#PBF - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
lt1055cn8-etched.step/lt1055cn8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1055cn8.step/lt1055cn8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
a28f55226320eb34, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).